makertech-cura
This is unofficial and not endorsed by Makertech or Ultimaker
This repository contains a simple script and the Makertech resources required to repackage a Cura image with the ProForge support. It is aimed at Linux support, as both Windows and MacOS have full support at https://www.makertech3d.com/pages/downloads
Cura 4+ don't appear to work with the resources - you'll see "Profile: Not Supported" for the nozzle/layer resolution settings. Fixes welcome.
Pre-requisites:
- wget
- sudo (for mount/unmount)
As the Cura images appear to be AppImage v1 mount is required to extract the contents. See build.sh if concerned ;-)
Usage
It's hopefully as simple as
./build.sh
And you should get a build folder with your complete *.MT.AppImage
Bundled resources
The bundled resources are taken from Windows Makertech Cura 3.6.2
If you spot updates that can be made please feel free to create a PR
Copyright etc
All copyrights and trademarks belong to their respective owners.
Ultimaker Cura v3.1+ is provided under the LGPLv3.
The build.sh script is freely available for anyone to use or modify without any restriction, though no warranty or suitability or fitness for any use is given.
The ProForge/Makertech resources were created by Makertech and are provided open source.