This application was generated using JHipster 5.0.0, you can find documentation and help at https://www.jhipster.tech/documentation-archive/v5.0.0.
This is a "gateway" application intended to be part of a microservice architecture, please refer to the Doing microservices with JHipster page of the documentation for more information.
This application is configured for Service Discovery and Configuration with the JHipster-Registry. On launch, it will refuse to start if it is not able to connect to the JHipster-Registry at http://localhost:8761. For more information, read our documentation on Service Discovery and Configuration with the JHipster-Registry.
Before you can build this project, you must install and configure the following dependencies on your machine:
- Node.js: We use Node to run a development web server and build the project. Depending on your system, you can install Node either from source or as a pre-packaged bundle.
- Yarn: We use Yarn to manage Node dependencies. Depending on your system, you can install Yarn either from source or as a pre-packaged bundle.
After installing Node, you should be able to run the following command to install development tools. You will only need to run this command when dependencies change in package.json.
yarn install
We use yarn scripts and Webpack as our build system.
Run the following commands in two separate terminals to create a blissful development experience where your browser auto-refreshes when files change on your hard drive.
./gradlew
yarn start
Yarn is also used to manage CSS and JavaScript dependencies used in this application. You can upgrade dependencies by
specifying a newer version in package.json. You can also run yarn update
and yarn install
to manage dependencies.
Add the help
flag on any command to see how you can use it. For example, yarn help update
.
The yarn run
command will list all of the scripts available to run for this project.
Congratulations! You've selected an excellent way to secure your JHipster application. If you're not sure what OAuth and OpenID Connect (OIDC) are, please see What the Heck is OAuth?
To log in to your app, you'll need to have Keycloak up and running. The JHipster Team has created a Docker container for you that has the default users and roles. Start Keycloak using the following command.
docker-compose -f src/main/docker/keycloak.yml up
The security settings in src/main/resources/application.yml
are configured for this image.
security:
basic:
enabled: false
oauth2:
client:
accessTokenUri: http://localhost:9080/auth/realms/jhipster/protocol/openid-connect/token
userAuthorizationUri: http://localhost:9080/auth/realms/jhipster/protocol/openid-connect/auth
clientId: web_app
clientSecret: web_app
scope: openid profile email
resource:
userInfoUri: http://localhost:9080/auth/realms/jhipster/protocol/openid-connect/userinfo
If you'd like to use Okta instead of Keycloak, you'll need to change a few things. First, you'll need to create a free developer account at https://developer.okta.com/signup/. After doing so, you'll get your own Okta domain, that has a name like https://dev-123456.oktapreview.com
.
Modify src/main/resources/application.yml
to use your Okta settings.
security:
basic:
enabled: false
oauth2:
client:
accessTokenUri: https://{yourOktaDomain}.com/oauth2/default/v1/token
userAuthorizationUri: https://{yourOktaDomain}.com/oauth2/default/v1/authorize
clientId: {clientId}
clientSecret: {clientSecret}
scope: openid profile email
resource:
userInfoUri: https://{yourOktaDomain}.com/oauth2/default/v1/userinfo
Create an OIDC App in Okta to get a {clientId}
and {clientSecret}
. To do this, log in to your Okta Developer account and navigate to Applications > Add Application. Click Web and click the Next button. Give the app a name you’ll remember, specify http://localhost:8080
as a Base URI, and http://localhost:8080/login
as a Login Redirect URI. Click Done and copy the client ID and secret into your application.yml
file.
TIP: If you want to use the Ionic Module for JHipster, you'll need to add
http://localhost:8100
as a Login redirect URI as well.
Create a ROLE_ADMIN
and ROLE_USER
group and add users into them. Create a user (e.g., "admin@jhipster.org" with password "Java is hip in 2017!"). Modify e2e tests to use this account when running integration tests. You'll need to change credentials in src/test/javascript/e2e/account/account.spec.ts
and src/test/javascript/e2e/admin/administration.spec.ts
.
Navigate to API > Authorization Servers, click the Authorization Servers tab and edit the default one. Click the Claims tab and Add Claim. Name it "roles", and include it in the ID Token. Set the value type to "Groups" and set the filter to be a Regex of .*
.
After making these changes, you should be good to go! If you have any issues, please post them to Stack Overflow. Make sure to tag your question with "jhipster" and "okta".
Service workers are commented by default, to enable them please uncomment the following code.
- The service worker registering script in index.html
<script>
if ('serviceWorker' in navigator) {
navigator.serviceWorker
.register('./service-worker.js')
.then(function() { console.log('Service Worker Registered'); });
}
</script>
Note: workbox creates the respective service worker and dynamically generate the service-worker.js
For example, to add Leaflet library as a runtime dependency of your application, you would run following command:
yarn add --exact leaflet
To benefit from TypeScript type definitions from DefinitelyTyped repository in development, you would run following command:
yarn add --dev --exact @types/leaflet
Then you would import the JS and CSS files specified in library's installation instructions so that Webpack knows about them: Edit src/main/webapp/app/vendor.ts file:
import 'leaflet/dist/leaflet.js';
Edit src/main/webapp/content/css/vendor.css file:
@import '~leaflet/dist/leaflet.css';
Note: there are still few other things remaining to do for Leaflet that we won't detail here.
For further instructions on how to develop with JHipster, have a look at Using JHipster in development.
You can also use Angular CLI to generate some custom client code.
For example, the following command:
ng generate component my-component
will generate few files:
create src/main/webapp/app/my-component/my-component.component.html
create src/main/webapp/app/my-component/my-component.component.ts
update src/main/webapp/app/app.module.ts
OpenAPI-Generator is configured for this application. You can generate API code from the src/main/resources/swagger/api.yml
definition file by running:
./gradlew openApiGenerate
Then implements the generated delegate classes with @Service
classes.
To edit the api.yml
definition file, you can use a tool such as Swagger-Editor. Start a local instance of the swagger-editor using docker by running: docker-compose -f src/main/docker/swagger-editor.yml up -d
. The editor will then be reachable at http://localhost:7742.
Refer to Doing API-First development for more details.
To optimize the jhipsterSampleApplication application for production, run:
./gradlew -Pprod clean bootWar
This will concatenate and minify the client CSS and JavaScript files. It will also modify index.html
so it references these new files.
To ensure everything worked, run:
java -jar build/libs/*.war
Then navigate to http://localhost:8080 in your browser.
Refer to Using JHipster in production for more details.
To launch your application's tests, run:
./gradlew test
Unit tests are run by Jest and written with Jasmine. They're located in src/test/javascript/ and can be run with:
yarn test
UI end-to-end tests are powered by Protractor, which is built on top of WebDriverJS. They're located in src/test/javascript/e2e
and can be run by starting Spring Boot in one terminal (./gradlew bootRun
) and running the tests (yarn run e2e
) in a second one.
Performance tests are run by Gatling and written in Scala. They're located in src/test/gatling.
To use those tests, you must install Gatling from https://gatling.io/.
For more information, refer to the Running tests page.
You can use Docker to improve your JHipster development experience. A number of docker-compose configuration are available in the src/main/docker folder to launch required third party services.
For example, to start a mongodb database in a docker container, run:
docker-compose -f src/main/docker/mongodb.yml up -d
To stop it and remove the container, run:
docker-compose -f src/main/docker/mongodb.yml down
You can also fully dockerize your application and all the services that it depends on. To achieve this, first build a docker image of your app by running:
./gradlew bootWar -Pprod buildDocker
Then run:
docker-compose -f src/main/docker/app.yml up -d
For more information refer to Using Docker and Docker-Compose, this page also contains information on the docker-compose sub-generator (jhipster docker-compose
), which is able to generate docker configurations for one or several JHipster applications.
To configure CI for your project, run the ci-cd sub-generator (jhipster ci-cd
), this will let you generate configuration files for a number of Continuous Integration systems. Consult the Setting up Continuous Integration page for more information.