song343119682/openwifi-hw

FPGA/hardware design of openwifi

openwifi-hw

openwifi: Linux mac80211 compatible full-stack IEEE802.11/Wi-Fi design based on SDR (Software Defined Radio).

This repository includes Hardware/FPGA design. To be used together with openwifi driver and software repository.

Openwifi code has dual licenses. AGPLv3 is the opensource license. For non-opensource and advanced feature license, please contact Filip.Louagie@UGent.be. Openwifi project also leverages some 3rd party modules. It is user's duty to check and follow licenses of those modules according to the purpose/usage. You can find an example explanation from Analog Devices for this compound license conditions. [How to contribute].

Pre-compiled FPGA files: boards/$BOARD_NAME/sdk/ has FPGA bit file, ila .ltx file (if ila inserted) and other initilization files.

Environment variable BOARD_NAME options:

• zc706_fmcs2 (Xilinx ZC706 board + FMCOMMS2/3/4)
• zed_fmcs2 (Xilinx zed board + FMCOMMS2/3/4) -- Vivado license NOT needed
• adrv9364z7020 (ADRV9364-Z7020 + ADRV1CRR-BOB) -- Vivado license NOT needed
• adrv9361z7035 (ADRV9361-Z7035 + ADRV1CRR-BOB/FMC)
• zc702_fmcs2 (Xilinx ZC702 board + FMCOMMS2/3/4) -- Vivado license NOT needed
• antsdr (MicroPhase enhanced ADALM-PLUTO SDR. Notes) -- Vivado license NOT needed
• zcu102_fmcs2 (Xilinx ZCU102 board + FMCOMMS2/3/4)

Build FPGA:

• Pre-conditions:

  • Xilinx Vivado (with SDK and HLS) 2018.3
  • Install the evaluation license of Xilinx Viterbi Decoder into Vivado.
  • Ubuntu 18/20 LTS release (We test in these OS. Other OS might also work.)

• Prepare Analgo Devices HDL library (only run once):

export XILINX_DIR=your_Xilinx_directory
(Example: export XILINX_DIR=/opt/Xilinx)
./prepare_adi_lib.sh $XILINX_DIR

• Prepare Analgo Devices specific ip (only run once for each board you have):

export BOARD_NAME=your_board_name
(Example: export BOARD_NAME=zc706_fmcs2)
./prepare_adi_board_ip.sh $XILINX_DIR $BOARD_NAME
(Don't need to wait till the building end. When you see "Building ABCD project [...", you can stop it.)

• Launch Vivado:

cd openwifi-hw/boards/$BOARD_NAME/
source $XILINX_DIR/Vivado/2018.3/settings64.sh
vivado

• In Vivado:

source ./openwifi.tcl
Open Block Design
Tools --> Report --> Report IP Status
Generate Bitstream
(Will take a while)
File --> Export --> Export Hardware... --> Include bitstream --> OK
File --> Launch SDK --> OK, then close SDK

• In Linux, store the FPGA files to a specific directory:

cd openwifi-hw/boards
./sdk_update.sh $BOARD_NAME

• Add the FPGA files to git (only if you want):

git add $BOARD_NAME/sdk/*
git commit -m "new fpga img for openwifi (or comments you want to make)"
git push

"git lfs (Git Large File Storage)" operation is recommended for system_top.bit and system.hdf before git add (avoid too big repo!)

Modify IP cores:

IP core source files are in "ip" directory. After IP is modified, export the IP core into "ip_repo" directory. Then re-run the full FPGA build procedure. For IP project created by _high.tcl or _low.tcl or _ultra_scale.tcl, exporting target directory should be ip_repo/high/ or ip_repo/low/ or ip_repo/ultra_scale/ (for ZynqMP SoC, like zcu102 board). Other IP should be exported to ip_repo/common/ (except that the side channel module has small/big postfix).

• IP cores designed by HLS (mixer_duc):

Create a project "mixer_duc" with file in ip/mixer_duc/src directory in Vivado HLS.
During creating, set mixer_duc as top, select zc706 board as "Part" and set Clock Period 5 (means 200MHz).
Run C synthesis.
Click solution1, Solution --> Export RTL
Copy project_directory/solution1/impl/ip to ip_repo/common/mixer_duc

• IP cores designed by block-diagram (duc_bank_core_low, duc_bank_core_high, etc). duc_bank_core_high as example:

Open Vivado, then in Vivado Tcl Console:
cd ip/duc_bank_core_high
source ./duc_bank_core_high.tcl
In Vivado:
Open Block Design
Tools --> Report --> Report IP Status
Tools --> Create and Package New IP... --> Next --> Package a block design from ... --> Next --> set "ip_repo/high/duc_bank_core" as target directory --> Next --> OK -- Finish
In new opened temporary project: Review and Package --> Package IP --> Yes

• IP cores designed by verilog (rx_intf, xpu, etc). xpu as example:

Open Vivado, then in Vivado Tcl Console:
cd ip/xpu
source ./xpu_high.tcl
In Vivado:
Tools --> Report --> Report IP Status
Tools --> Create and Package New IP... --> Next --> Next --> set "ip_repo/high/xpu" as target directory --> Next --> OK -- Finish
In new opened temporary project: Review and Package --> Package IP --> Yes

• openofdm_rx: You need to apply the evaluation license of Xilinx Viterbi Decoder and install on your PC firstly.

  • In Linux:

    cd ip/
    git submodule init openofdm_rx
    git submodule update openofdm_rx
    cd openofdm_rx
    git checkout dot11zynq
    git pull
    

  • Open Vivado, then in Vivado Tcl Console:

    cd ip/openofdm_rx
    source ./openofdm_rx.tcl
    

  • In Vivado:

    Tools --> Report --> Report IP Status
    Tools --> Create and Package New IP... --> Next --> Next --> set "ip_repo/common/openofdm_rx" as target directory --> Next --> OK -- Finish
    In new opened temporary project: Review and Package --> Package IP --> Yes
    

Note: openwifi adds necessary modules/modifications on top of Analog Devices HDL reference design. For general issues, Analog Devices wiki pages would be helpful!

Notes: The 802.11 ofdm receiver is based on openofdm project. You can find our patch (bug-fix, improvement) here which is mapped to ip/openofdm_rx.