- A UI that matches OctoPrint printer
- Client and server architecture solution
- OctoPi -> OctoPrint service -> Printer
(The update and upgrade operations are not redundant)
-
You can create a WPA profile in the boot directory boot/wpa_supplicant.txt to add WiFi connections
-
If you are a BX machine model user, you will need to add the following fragment lines to the RaspberryPi boot/config.txt file to display them correctly on screen:
- max_usb_current=1
- hdmi_group=2
- hdmi_mode=87
- hdmi_cvt 1024 600 60
- hdmi_drive=1
- SSH your PI on your computer for further action
After Pi boot you can get the IP address of Pi from the screen
If you connect with terminal
Run Command:
- svn export https://github.com/bigtreetech/OctoBTT.git/trunk/install.sh && sudo /bin/sh install.sh
- Used with OctoPrint
- Because the serial port delay is long, the background has blocked the serial port connection, we only use the USB automatic connection
- It is recommended to run with Marlin firmware. Currently there may be some unknown problems due to non-marlin firmware
- If you want to use octoprint online , you can use the network cable to connect to the router.
- Fork the repository
- New Feat_ XXX branch
- Submit code
- New Pull Request