sorted01/Filametrix

Issues

• Supporting Rapido UHF / Rapido 2?

  #27 opened a year ago by dflemstr
  10

• No body for v6 volcano hotend.

  #57 opened 3 months ago by stonemandave
  2

• CAD Files for EBB and D2F Options

  #56 opened 3 months ago by eprouty
  2

• Is there old CW2 main body for EBB but without D2F?

  #55 opened 3 months ago by Gnierat
  0

• filametrix for sovol sv08

  #53 opened 4 months ago by checkitog
  0

• Can't Find "Cutting Point on Gantry with Servo" Feature

  #42 opened a year ago by Yanichar
  4

• Support for Vz-HextrudORT Low

  #28 opened a year ago by kriffo88
  9

• Issue with motors skipping because of too much pressure applied on the lever

  #33 opened a year ago by seacred
  4

• Solution for the gantry mounted part for people with extrusion backers?

  #11 opened a year ago by erazor666
  15

• M2.5 bolt

  #52 opened 6 months ago by WegnerDan
  0

• Question about Voron SW

  #46 opened 10 months ago by rollduck
  3

• Mounting instruction for V6-R6 Hotend

  #44 opened a year ago by TheMaxx2804
  3

• Orbiter 2 mount not working

  #45 opened 10 months ago by appleimperio
  2

• When using SB_CS2_Main_Buddy_EBB_ECAS_D2F big gap with default cable cover?

  #24 opened a year ago by MaikelKelder
  10

• skipping steps

  #49 opened 9 months ago by appleimperio
  2

• bowden contraints issue

  #48 opened 10 months ago by CooperGerman
  1

• Can you adapt this bambu hotend mod

  #38 opened a year ago by caokang1997
  0

• StealthOrbiter mount interfears with the cutting arm

  #41 opened a year ago by EmJay276
  0

• mirgrate to the newer motor

  #32 opened a year ago by d0m1n1qu3
  3

• Supporting EBB SBxxxx + 2 D2F: Best of all worlds?

  #26 opened a year ago by dflemstr
  4

• TAP with Magnets

  #35 opened a year ago by ThaNeub
  5

• Crazy Dragon (Dragon UHF mini mode)

  #8 opened a year ago by messymouse
  3

• Will an 18mm spring work?

  #12 opened a year ago by juliusjj25
  6

• Latch is weakened - here is a stronger one.

  #30 opened a year ago by pmaersk
  1

• D2F switch does not trigger reliably on filament.

  #34 opened a year ago by atoomnetmarc
  3

• HGX large gear cw2 remix

  #25 opened a year ago by Darkmadda
  15

• Mods for the G2E

  #31 opened a year ago by IRTrail
  0

• Example config / readme update / slicer settings

  #29 opened a year ago by bartoszwas
  1

• Build Volume Collision

  #17 opened a year ago by juliusjj25
  7

• The dual D2F SB part has a major flaw

  #7 opened a year ago by scottgrim
  3

• Revo micro

  #23 opened a year ago by kakou-fr
  0

• Happy Hare Update

  #14 opened a year ago by drecoor
  2

• Bondtech LGX lite // Canbus // ball bearing filament sensor

  #10 opened a year ago by ricosander
  1

• bambu hotend .....

  #9 opened a year ago by jakeelee
  1

• Is it v6 compatible?

  #6 opened a year ago by FrAn3030
  3

• Stealthburner Rapido Uhf

  #3 opened a year ago by gogsi1
  15

• Which CW2 motor plate to use?

  #15 opened a year ago by JAMMnGA
  2

• Rapido CAD/STL

  #4 opened a year ago by juliusjj25
  5

• Dragonfly Hotend BMO Hotend

  #5 opened a year ago by wuzefacke
  0