spacelab-ufsc/eps2

Issues

• I2C Communication

  #197 opened 5 months ago by MatthewStueber
  12

• Firmware: Update mppt device unit test

  #195 opened a year ago by ramonborba
  0

• Firmware: Improve MPPT algorithm robustness

  #193 opened 2 years ago by ramonborba
  0

• Error in the MPPT algorithm

  #184 opened 2 years ago by LucasAzulay
  3

• Error loading new code in EPS2 V2.0

  #192 opened 2 years ago by LucasAzulay
  1

• Release v0.4

  #185 opened 2 years ago by mgm8
  0

• The EPS2 cannot communicate with the TTC2

  #183 opened 2 years ago by LucasAzulay
  0

• Hardware: Evaluate the need of zener on DS2777G+ (Battery monitor IC) I2C bus

  #161 opened 3 years ago by vinepb
  1

• Hardware: Mount the missing PC-104 connector of the EM PCBs

  #158 opened 2 years ago by mgm8
  0

• Hardware: Fix the battery header position

  #159 opened 2 years ago by mgm8
  0

• Firmware: Develop a UART with interruption for handling TTC communication

  #140 opened 3 years ago by andrempmattos
  2

• Firmware: Develop a parameter server task

  #136 opened 4 years ago by mgm8
  0

• Firmware: Develop a driver for the DS2777G+ IC

  #157 opened 3 years ago by mgm8
  0

• Hardware: Remove ghost enable signal for OBDH regulator on MCU schematic

  #137 opened 4 years ago by YanAzer
  0

• Hardware: Update block diagrams present on architecture sheet

  #135 opened 4 years ago by YanAzer
  0

• Readme: Update board prints of v0.2 board

  #134 opened 4 years ago by YanAzer
  0

• Firmware: Delevop a device for power converters

  #120 opened 4 years ago by YanAzer
  0

• Hardware: Add teardrops to board layout

  #119 opened 4 years ago by YanAzer
  0

• Hardware: Improve RTD picoblade nomenclature

  #116 opened 4 years ago by andrempmattos
  0

• Hardware: Improve kill-switches labels in silkscreen

  #115 opened 4 years ago by andrempmattos
  0

• Documentation: Add draftsman appendix

  #112 opened 4 years ago by YanAzer
  0

• Documentation: Write the "tests" chapter

  #110 opened 4 years ago by YanAzer
  0

• Firmware: Add a task to manage the system time

  #156 opened 3 years ago by mgm8
  0

• Release v0.3

  #154 opened 3 years ago by mgm8
  0

• Hardware: Updated versioning resistors for v0.2 release

  #117 opened 3 years ago by YanAzer
  0

• Firmware: Develop a unit test for the battery monitor device

  #153 opened 3 years ago by andrempmattos
  0

• Firmware: Develop a unit test for the heater device

  #152 opened 3 years ago by andrempmattos
  0

• Firmware: Develop a unit test for the MPPT device

  #151 opened 3 years ago by andrempmattos
  0

• Firmware: Develop a unit test for the voltage sensor device

  #150 opened 3 years ago by andrempmattos
  0

• Firmware: Develop a unit test for the current sensor device

  #148 opened 3 years ago by andrempmattos
  0

• Firmware: Develop a unit test for the OBDH device

  #147 opened 3 years ago by andrempmattos
  0

• Firmware: Develop a unit test for the TTC device

  #146 opened 3 years ago by andrempmattos
  0

• Firmware: Develop a unit test for the temp sensor device

  #149 opened 3 years ago by andrempmattos
  0

• Firmware: Update ADC driver to use driver lib

  #121 opened 3 years ago by YanAzer
  0

• Firmware: Develop a MPPT algorithm task

  #141 opened 3 years ago by andrempmattos
  1

• Firmware: Develop a heater controller task

  #142 opened 3 years ago by andrempmattos
  0

• Firmware: Develop a driver for PWM

  #114 opened 3 years ago by YanAzer
  0

• Documentation: Update hardware chapter with changes done in v0.2

  #130 opened 3 years ago by YanAzer
  1

• Documentation: Add system fault led to Status LEDs subsection

  #139 opened 4 years ago by YanAzer
  0

• Documentation: Add details about the versioning resistors

  #125 opened 4 years ago by YanAzer
  0

• Documentation: Remove OBDH regulator enable pin from documents (it was removed)

  #127 opened 4 years ago by andrempmattos
  0

• Documentation: Write instructions for powering the board using externall power supply

  #138 opened 4 years ago by YanAzer
  0

• hardware: Evaluate passive componentes used in DC-DC regulators

  #126 opened 4 years ago by YanAzer
  0

• Release v0.2

  #128 opened 4 years ago by mgm8
  0

• Hardware: Remove 3D body of debug headers

  #118 opened 4 years ago by andrempmattos
  0

• Hardware: Rename the beacon and main radio labels

  #111 opened 4 years ago by YanAzer
  0

• Hardware: Change DS2775G+ to DS2777G+

  #123 opened 4 years ago by YanAzer
  0

• Hardware: Fix fabrication information on sheet layer for flight model

  #124 opened 4 years ago by YanAzer
  0

• Firmware: Estimate tasks stack size

  #122 opened 4 years ago by YanAzer
  0

• Hardware: Rename net labels "3V3_EPS_Beacon" to "3V3_EPS_TTC"

  #113 opened 4 years ago by YanAzer
  0