sparkfun/Arduino_Apollo3

Issues

• Platform.txt Missing Quotes on MacOS Causes Upload Failure

  #476 opened 7 months ago by DigiMaxIO
  0

• interrupts() and noInterrupts() do not have any definition.

  #472 opened 2 years ago by bimalpaneru
  9

• Custom Serial Pins for serial 1 have receiving issue!

  #496 opened a year ago by bimalpaneru
  10

• Sleep Time is not correct in Turbo Mode

  #495 opened a year ago by TurboStew
  1

• Arduino IDE version

  #494 opened a year ago by jarleven
  1

• Servo Library Inoperable on LoRa thing plus Explorable

  #488 opened a year ago by e-deck
  3

• CMSIS-DSP lib update for SparkFun RedBoard Artemis Nano

  #487 opened a year ago by gmiodice
  0

• Apollo3 BLE example does not compile for Artemis ATP board

  #483 opened a year ago by brennecj
  1

• Software Serial read not proper

  #482 opened 2 years ago by bimalpaneru
  0

• Setup development environment in VSCode for Ambiq microcontroller

  #481 opened 2 years ago by RuXBee
  2

• v1.2.3 LowPower_WithWorkAndGPIOInterrupt example modification

  #480 opened 2 years ago by rserranosmith
  0

• SPI bit order is misinterpreted

  #478 opened 2 years ago by andreer
  3

• cannot send command over serial from a redboard artemis Serial1 to Adafruit ultimate GPS

  #477 opened 2 years ago by jerabaul29
  1

• LoRa RFM95/ board does not work with RedBoard/Artemis Module/ Artemis_ATP environment

  #473 opened 2 years ago by bimalpaneru
  2

• Serial1 does not work on Artemis Nano

  #474 opened 2 years ago by paulvha
  0

• tone() does not work correctly on V2.x.x

  #471 opened 2 years ago by paulvha
  0

• Broken link to CodeConventions

  #469 opened 2 years ago by ArminJo
  3

• PDM Gain setting doesn't work

  #467 opened 2 years ago by tgruetzm
  0

• Missing core v1 support for Sparkfun LoRa Thing Plus expLoRaBLE

  #470 opened 2 years ago by larswd
  4

• arm64 has worked great, why not add it?

  #468 opened 3 years ago by bm16ton
  0

• AGT Iridium Modem Error

  #466 opened 3 years ago by NezhaZahri
  0

• incomplete definition of GPIO's for EDGE

  #464 opened 3 years ago by paulvha
  0

• Problem with Arduino_Apollo3 Core

  #463 opened 3 years ago by wivach
  0

• Servo examples are incorrect

  #462 opened 3 years ago by paulvha
  0

• Failing to upload to Sparkfun Edge board using Arduino IDE 1.8.19

  #461 opened 3 years ago by asanjib28
  3

• SPI.end incorrect check

  #442 opened 3 years ago by paulvha
  2

• Pulling Serial1 RX low causes Artemis to hang with v2.1 of the core

  #423 opened 3 years ago by PaulZC
  33

• DA16200 and RingBuffer.h issue

  #459 opened 3 years ago by ilucwl
  7

• Internal Vss digital ground not zero

  #460 opened 3 years ago by NezhaZahri
  0

• push critical fixes to the core v1 (since core v2 is not always possible to use, due to its overhead, so core v1 still is relevant)

  #458 opened 3 years ago by jerabaul29
  4

• [library issue]: USB_Host_Shield_2.0 library

  #422 opened 3 years ago by Topo-png
  2

• use-after-free error in Wire library

  #454 opened 3 years ago by nigelb
  4

• Add support for Arduino CLI/IDE 2.0 Debugging

  #453 opened 3 years ago by marsfan
  2

• Missing `noInterrupts()` and `interrupts()` functions

  #431 opened 3 years ago by santaimpersonator
  2

• About MBedOS: are you using v6? possible to use with both RTOS and BareMetal

  #444 opened 3 years ago by jerabaul29
  3

• I2S example

  #445 opened 3 years ago by jerabaul29
  1

• Deep sleep not working with BLE

  #451 opened 3 years ago by Brezensalzer
  3

• add some examples of how to use the times in core v1?

  #450 opened 3 years ago by jerabaul29
  1

• adding codec 2 to a project

  #447 opened 3 years ago by jerabaul29
  1

• unique chip ID accessible from the sketch?

  #443 opened 3 years ago by jerabaul29
  3

• How TO Speed Up transmission frequency of BLE

  #438 opened 3 years ago by JacksonLtt
  6

• any plans to update the MCU?

  #429 opened 3 years ago by jerabaul29
  1

• GPIO pin and current consumption odd behavior

  #439 opened 3 years ago by derekpickell
  9

• questions about the "EEPROM emulation" characteristics

  #449 opened 3 years ago by jerabaul29
  1

• Making fixed OneWire available to core v1/ v2

  #448 opened 3 years ago by jerabaul29
  0

• some wonders about delayMicroseconds, how fast digital read / write mode is set, etc [note: core v1]

  #440 opened 3 years ago by jerabaul29
  3

• Artemis Module board type fails with I2C libraries

  #424 opened 3 years ago by nseidle
  6

• Permission error MacOS with 2.2.0

  #435 opened 3 years ago by sylgeist
  6

• I2C/Qwiic issues with 2.1.1 and ATP board

  #432 opened 3 years ago by sylgeist
  3

• linker issues including precompiled library

  #425 opened 3 years ago by wemaxon
  4