sparkybg/UniSolder-5.2

Issues

• Open Source PCB to revive the project

  #14 opened a year ago by B9KGF
  2

• Restricting automatic tip detection

  #16 opened 8 months ago by PBrunot
  1

• Compilation failed

  #15 opened a year ago by SUzhouTaoTao
  3

• Chip shortage and MCU alternatives

  #11 opened 2 years ago by demondev
  6

• C245 Thermocouple calibration (not an issue, the forum doesn't work)

  #13 opened 2 years ago by alpemwarrior
  3

• 5.2C Schematics show 100nF power decoupling cap outputs ganged together

  #12 opened 2 years ago by rokkoyama
  2

• Toroidal vs Meanwell

  #9 opened 3 years ago by cammas
  10

• Measured tip temperature stays at ~26C despite full power blown in the heater

  #10 opened 3 years ago by m-kozlowski
  2

• After I burn the firmware, the screen shows 45

  #8 opened 3 years ago by ws786873
  7

• Feature request: show firmware version

  #7 opened 4 years ago by Vogs27
  0

• OLED Internal charge pump setup swaped for SSH1106 and SSD1306

  #5 opened 4 years ago by Janesak1977
  1