speeduino/speeduino

Issues

• Dual injections on low RPM with Teensy 3.5 and 4.1

  #1181 opened 10 months ago by RempageR1
  34

• Traction control

  #1260 opened 2 months ago by Dominik335i
  1

• Secondary Spark table. Switched - Input based not working

  #1270 opened 16 days ago by 17Blue
  3

• Oddfire angles are not used for injection timing

  #1271 opened 16 days ago by noisymime
  0

• Feature request: Idle valve anti-stall

  #1259 opened 16 days ago by Nikolai521
  2

• Nitrous RPM range calculation can overflow

  #1266 opened 25 days ago by adbancroft
  0

• Incorrect BMW Can broadcast Coolant value conversation.

  #1218 opened a month ago by Zazins
  10

• Soft Launch ignition absolute timing is unsigned

  #1188 opened a month ago by noisymime
  1

• TunerStudio MS msq files does not contain ECT/IAT/o2/VSS calibration

  #1265 opened a month ago by AlexE75
  3

• Incorrect pin listing in /reference/speeduino.ini

  #1264 opened a month ago by OpenLogicEFI
  2

• Missing tooth decoder works with single tooth cam, but code says it doesn't

  #1257 opened 2 months ago by clytle374
  2

• Basemap IAT density table with 0%

  #1262 opened 2 months ago by lucasgontijo94
  0

• CarECU

  #1261 opened 2 months ago by chefpe
  1

• Staged injection: Different injector characteristics and timing possible?

  #1220 opened 6 months ago by Dominik335i
  2

• SD card logger can stumble the engine

  #1258 opened 2 months ago by drozdowsky
  5

• sequential fuel does not work in rover decoder

  #1240 opened 2 months ago by dwisnie2
  12

• 8 Squirts per engine cycle bug causing Zero duty cycle, lots of other problems

  #1253 opened 2 months ago by youngfg
  5

• Miata decoder - sequential does not run properly above 5000rpm

  #1243 opened 4 months ago by AlexE75
  6

• MAP - non-Instantaneous sampling methods skip readings

  #1251 opened 3 months ago by adbancroft
  0

• MAP - Cycle Minimum & Event Average do not update EMAP

  #1250 opened 3 months ago by adbancroft
  0

• Suzuki K6A RPM code issue (minor bug)

  #1173 opened 3 months ago by adbancroft
  0

• Pin 14 is Always being pullup

  #1206 opened 3 months ago by FazxFi
  2

• Flex Sensor Settings not in function

  #1247 opened 3 months ago by Bolino08C
  4

• Support Wasted COP mode on Mega2560 6+3

  #1245 opened 3 months ago by ggurov
  2

• Crash/Misfire only with 202402 Firmware

  #1205 opened 3 months ago by zacharyneveu
  4

• Test mode leaves ignition channels active when being stopped

  #1246 opened 3 months ago by ggurov
  4

• Data logging pin active when main data logging function is diabled

  #1244 opened 4 months ago by ggurov
  0

• Secondary tables switching option for lesser instead of greater

  #1204 opened 9 months ago by joeclone
  3

• TunerStudio MS changing values randomly

  #1224 opened 6 months ago by Nikolai521
  6

• Reset control pin not working

  #1241 opened 4 months ago by Nikolai521
  0

• IAC Running Hot on Firmware 202305 and newer

  #1235 opened 4 months ago by dMartin1954
  2

• Issue with stm32f103c8t6 (Bluepill 128k) compiling with TIMERS error

  #1232 opened 5 months ago by ArtCodeZen
  3

• CAN RusEfi WBO not working together with BMW or VAG CAN broadcasting

  #1217 opened 5 months ago by Zazins
  11

• Fool-proof correction tables and other improvements

  #1226 opened 5 months ago by roko772
  4

• IDLE - new options

  #1186 opened 10 months ago by MercKlinika
  1

• multispark ata low rpm

  #1201 opened 9 months ago by PABLORDP
  3

• Stepper OL+CL control

  #1214 opened 7 months ago by ponzano
  7

• 202402 firmware VVT1 no reading and no duty aplied to solenoid.

  #1213 opened 7 months ago by h25r
  21

• Air Conditioning Control issue in ” closed + openloop STEPPER idle “mode

  #1166 opened 7 months ago by nuosu
  4

• Idle up allow signed value

  #1180 opened 10 months ago by turboedge
  0

• Taper on load axis on acc enrich

  #1210 opened 8 months ago by runesmdk
  1

• Does the Speeduino have Over the Air (OTA) updates?

  #1208 opened 8 months ago by kimanigitau01
  1

• 2 stroke with Basic Distributor produces incorrect RPM reading

  #1192 opened 9 months ago by noisymime
  0

• Tacho sweep is not working with 202402 release

  #1195 opened 9 months ago by noisymime
  0

• Fuel Cut Rev Limiter

  #1196 opened 9 months ago by Tynashe28
  1

• Min/max allowable voltage value for O2 feedback.

  #1184 opened 9 months ago by Admanirv123
  4

• Support for Free Pin Configuration on STM32 and Teensy 4.1 Boards in TunerStudio

  #1191 opened 10 months ago by bahram-azimbeyk
  0

• Is primary injector pulse width calculation correct in calculateStaging(), when stagingMode is STAGING_MODE_AUTO?

  #1172 opened 10 months ago by ChrisNisbet01
  1

• Possible buffer overrun in comms_CAN.cpp?

  #1177 opened 10 months ago by adbancroft
  0

• PW unit test failing

  #1175 opened a year ago by adbancroft
  1