Issues
- 1
Rostock profile?
#69 opened by sacsac345 - 4
- 3
Simplify3D 4.1.2 and coming 5.0 Support
#67 opened by DroneMang - 6
- 5
Ability to turn off retraction
#44 opened by wbarber69 - 3
Weird out of place infill on the tower
#47 opened by cfelicio - 1
Force tower position
#53 opened by paukstelis - 3
Fan keep on/off in tower
#65 opened by jbaiao - 1
Z return after tool change
#74 opened by D20180 - 2
- 5
No Zhop even if enabled..
#72 opened by TelliMantelli - 4
Purge Tower Wrong direction?
#71 opened by TelliMantelli - 0
Purge tower size???
#70 opened by TelliMantelli - 46
- 6
Prusa MMU2 Filaswitch
#55 opened by xStolix - 2
- 1
Error code: 2
#66 opened by trev502000 - 3
{Question} Guide for install?
#59 opened by Stady234 - 53
Cura Support
#43 opened by cfelicio - 2
THC-01
#64 opened by trev502000 - 1
Longer Purge for Contrasting Colors
#42 opened by Raezinus - 1
Double retraction following prepurge
#49 opened by paukstelis - 3
0.15 layer height
#46 opened by paukstelis - 2
Slic3r settings
#60 opened by tenmonkeys - 3
prerun.prime false results in division by zero
#61 opened by paukstelis - 1
Version number incorrect in 0.20.0
#63 opened by vonkoda - 3
Possible to retract before moving to tower?
#62 opened by theophile - 1
Avoid crossing outlines
#57 opened by frizinko - 5
Curl scripting.
#45 opened by wbarber69 - 5
S3D sequential printing
#52 opened by sersmax - 1
PP Fail When z-lift = 0
#50 opened by inventabuild - 0
- 7
Temperature issues
#39 opened by paukstelis - 3
Brim size to follow model brim size
#37 opened by spegelius - 2
how does the automated bat file work
#38 opened by wbarber69 - 2
Simplify3D supports
#41 opened by paukstelis - 2
Future dev: 3D preview
#36 opened by spegelius - 2
Simplify3D fan is turned on before tower
#35 opened by spegelius - 10
- 3
Infill Transitioning
#33 opened by cfelicio - 5
Feature request: Prusa MMU support
#30 opened by laird - 10
cfgfiles: temperature change problems
#32 opened by paukstelis - 3
Odd tower raft behavior
#28 opened by paukstelis - 11
Extraneous extrusion from tower
#22 opened by paukstelis - 3
lin advance
#27 opened by gavatron3000 - 4
Weird tower with 3dbenchy with latest master
#24 opened by cfelicio - 2
Issue with nozzle temperature
#23 opened by cfelicio - 3
stability of tower above 100mm
#21 opened by gavatron3000 - 3
Some gcode fails to generate proper tower
#19 opened by cfelicio - 2
Suggestion? 0.1mm layers
#20 opened by gavatron3000