spel-uchile/SUCHAI

Issues

• Payloads state machine does not preserve the status after a reset

  #27 opened 6 years ago by carlgonz
  0

• Wrong casting

  #26 opened 7 years ago by carlgonz
  0

• Build SUCHAI project

  #25 opened 7 years ago by osqzss
  5

• cmdPayload.c refactoring

  #17 opened 11 years ago by carlgonz
  0

• Repositorio de datos no funciona sin placa de payloads

  #23 opened 9 years ago by carlgonz
  0

• Tareas no se inician cuando no estan las EEPROM abordo

  #24 opened 9 years ago by carlgonz
  0

• Test set and execution of flight plan

  #19 opened 10 years ago by carlgonz
  4

• SOC is 1 and Vbatt 8.2V

  #11 opened 9 years ago by toopazo
  3

• Replace RTC battery

  #15 opened 9 years ago by carlgonz
  4

• Fundir FP y FP2 en una sola tarea y probar que no haya StackOverflow

  #21 opened 10 years ago by toopazo
  3

• Invalid commands were executed when telecomand was received

  #22 opened 10 years ago by carlgonz
  1

• Bad int trx_isAlive(void *param); implementation

  #20 opened 10 years ago by toopazo
  0

• eps_isAlive()

  #5 opened 10 years ago by toopazo
  2

• Replace SD memory

  #16 opened 10 years ago by carlgonz
  2

• dat_pay_expFis causing reset

  #14 opened 10 years ago by carlgonz
  4

• SUCHAI integration

  #6 opened 10 years ago by alexbecerra
  1

• Transform TRX preprocessor settings to variables

  #18 opened 10 years ago by carlgonz
  2

• langmuir_isAlive

  #9 opened 11 years ago by toopazo
  1

• Beacon redefinition

  #10 opened 11 years ago by carlgonz
  1

• Command to set trx baudrate

  #12 opened 11 years ago by carlgonz
  0

• trx_initialize causes system reset

  #8 opened 11 years ago by toopazo
  2

• TM frame endianess

  #13 opened 11 years ago by carlgonz
  1

• Libcsp out of buffers

  #4 opened 11 years ago by carlgonz
  1

• GPS antenna cable

  #7 opened 11 years ago by toopazo
  1

• Migrate from con_printf to printf

  #1 opened 11 years ago by carlgonz
  2

• bug SCH_TASKEXECUTER_VERBOSE

  #3 opened 11 years ago by toopazo
  2

• In I2C driver not send stop signal when read from eeprom

  #2 opened 11 years ago by toopazo
  1