sporniket/retro-computer-clean-schematics

Issues

• baldengineer/bit-preserve

  #52 opened 3 years ago by mrand
  1

• [bug][schematics] fix the association of mlcc capacitors and their footprint in schematics to match the association done in the pcb

  #51 opened 3 years ago by sporniket
  0

• [PCB] make custom footprint for the st modulator with shield pins

  #50 opened 3 years ago by sporniket
  1

• [git] Use submodule https://github.com/sporniket/kicad-3dshapes-handmade

  #49 opened 3 years ago by sporniket
  1

• [PCB] Footprints for shielded ports should have pins named 'SH'

  #46 opened 3 years ago by sporniket
  0

• [Schematics][PCB] Variable coil : the symbol should have a shield pin, its Footprint should name 'SH' the pins for the shields

  #47 opened 3 years ago by sporniket
  0

• [Schematic][PCB] Reset button should be shielded

  #48 opened 3 years ago by sporniket
  0

• [Atari STE]Use shielded connectors

  #45 opened 3 years ago by sporniket
  0

• [PCB]Custom footprint library for Atari ST special ports

  #44 opened 3 years ago by sporniket
  1

• [PCB] Custom footprints library for standard ports

  #43 opened 3 years ago by sporniket
  1

• [PCB] custom footprints for multi-pins (3 pins or more) components

  #42 opened 3 years ago by sporniket
  1

• [PCB] custom footprint library for passives

  #41 opened 3 years ago by sporniket
  0

• [ERC] PADRST - pin 98 of GSTMCU should be output

  #37 opened 3 years ago by sporniket
  0

• [ERC] SREQ/SLOAD - pin 36/35 of Shifter should be output/input

  #38 opened 3 years ago by sporniket
  0

• [ERC] Create power symbols for regulated voltages

  #39 opened 3 years ago by sporniket
  0

• [ERC] PADRST - pin 98 of GSTMCU should be output

  #40 opened 3 years ago by sporniket
  1

• [ERC] XBR - pin 29 of GSTMCU and pin 30 of blitter should be 3 states

  #36 opened 3 years ago by sporniket
  0

• [ERC] XDTACK - pin 46 of MFP, pin 27 of blitter and pin 71 of GSTMCU should be 3 states

  #35 opened 3 years ago by sporniket
  0

• [ERC] Analog output of YM2149 should be open-collector

  #30 opened 3 years ago by sporniket
  0

• [bug][ERC] subsheet 203 - bypass capacitors of Y200 should be connected to ground

  #31 opened 3 years ago by sporniket
  0

• [bug][ERC] Subsheet 203 - typo for global label SD[0..7] 'O' instead of '0'

  #32 opened 3 years ago by sporniket
  0

• [bug][ERC]Typo on the label wired on pin 9 of U307

  #33 opened 3 years ago by sporniket
  0

• [ERC] DMA - most signal are 3 states or open collector

  #34 opened 3 years ago by sporniket
  0

• [ERC] Pin 8 of TL497A should be passive

  #29 opened 3 years ago by sporniket
  0

• [ERC] Pin 39 of U101 should be bidirectionnal

  #28 opened 3 years ago by sporniket
  0

• [ERC][bug] pin 7-8 of DAC are not output

  #27 opened 3 years ago by sporniket
  0

• [ERC] ACIA - pin 7 is open collector

  #26 opened 3 years ago by sporniket
  0

• [ERC] Eproms - pin30 should be input

  #24 opened 3 years ago by sporniket
  0

• [ERC] Eproms - data bus pins are 3 states

  #25 opened 3 years ago by sporniket
  0

• [ERC] Outputs of 74x245 are 3 states

  #23 opened 3 years ago by sporniket
  0

• [ERC] Outputs of 74x244 are 3 states

  #20 opened 3 years ago by sporniket
  0

• [ERC] Outputs of 74f374 are 3 states

  #21 opened 3 years ago by sporniket
  0

• [ERC] Outputs of 74x257 are 3 states

  #22 opened 3 years ago by sporniket
  0

• [ERC] pins R/W should be 3-state for U100, U101

  #17 opened 3 years ago by sporniket
  0

• [ERC] pins FC[0..2] should be 3 state for U100, U101

  #18 opened 3 years ago by sporniket
  0

• [ERC] AS, UDS, LDS should be 3 state for U100, U101

  #19 opened 3 years ago by sporniket
  0

• [Atari STE] Rework the audio circuit for better understandability

  #15 opened 3 years ago by sporniket
  0

• [Atari STE] U500 and U501 are 74_F_374

  #14 opened 3 years ago by sporniket
  0

• [Atari STE] C127 should be 68 pF

  #11 opened 3 years ago by sporniket
  0

• [Atari STE] R126 should be 560 R

  #10 opened 3 years ago by sporniket
  0

• [Atari STE] R127 does not go to ground

  #12 opened 3 years ago by sporniket
  0

• [Atari STE] Some STEs use a 74F257 for U405, might be worth a note.

  #13 opened 3 years ago by sporniket
  0

• Spot the differences between PAL and NTSC

  #9 opened 3 years ago by sporniket
  1

• Make a symbol for Atari part C100209-C100213 : delay line

  #8 opened 3 years ago by sporniket
  0

• Make a symbol library for Atari Part C100210/C100214 - variable coil

  #6 opened 3 years ago by sporniket
  0

• Atari STE schematics : fix page ordering of subsheets

  #7 opened 3 years ago by sporniket
  0

• Generate 'physical pins arrangement' symbol

  #3 opened 4 years ago by sporniket
  0

• Migrate to Python3

  #4 opened 4 years ago by sporniket
  1

• [libItemFromJsonDatasheet] Fix the centering of power and ground pins

  #1 opened 4 years ago by sporniket
  1

• generate datasheet markdown from existing symbol

  #2 opened 4 years ago by sporniket
  1