A simple case to mount a rasbperry pi behind the screen of an ender 2 pro Tested with Raspberry Pi 3B+. Should also work with Raspberry Pi 4
Features
- Cut outs for ribbon cable for pi camera
- Cut outs for usb cables
- Easy access to SD Card Camera
- Zip Tie mounts
- Remove the 4 M3 screws holding on the back plate
- Add raspberry pi with 2-4 M3x4 or M3x6 screws
Autodesk Fusion 360 file: https://a360.co/38oL8Z0
3d files are located in the CAD directory.
*.f3d= Fusion 360 Files*.stl= 3d Printable Files
| Filename | STL | GIF |
|---|---|---|
| CAD/Front.stl |  |
 |
| CAD/Shroud.stl |  |
 |
This work is licensed under a Creative Commons Attribution 4.0 International License.
| ✅ | Share / Redistribute |
| ❌ | Sharing without ATTRIBUTION |
| ✅ | Remix allowed |
| ✅ | Share Remixes |
| ✅ | Commercial Use |
| ✅ | Share remixes under new license |
The contents of this readme were automatically generated from spuder/CAD-template. Click here to fork and use this template
make all