/ev3-ros

Interfacing LEGO Mindstorms EV3 running ev3dev Linux OS with ROS

Primary LanguageC++GNU General Public License v2.0GPL-2.0

ev3-ros

Interfacing LEGO Mindstorms EV3 running ev3dev linux OS with ROS

Note : This repositry is compatible with the ev3image file ev3dev-jessie-2015-12-30

Pre-requisites:

  • Host computer with ROS installed
  • A lego mindstorm ev3 unit with a Wi-Fi dongle

Setup

  • Download the image file from this repository or from here.

  • Follow the instructions here to copy the image file onto a SD card .

  • Follow the instructions to setup the ssh connection between your workstation and the ev3 brick :

    (i) In order to make the connection with a Wi-Fi dongle one has to first follow the instructions to get connected through USB here.

    (ii) Now once the connection is made through the USB, go here to learn how to get connected through a Wi-Fi dongle.

Note: Connecting the first time through dongle will only be cumbersome, this step is completed,connection will be made automatically upon booting the ev3 and our job is to only type the ssh command.

  • Now, follow instructions from here to setup the developement environment on the host computer.This will download two folders- examples and ros_lib in your working directory.roslib contains all the libraries required by the pre- existing ROS packages to run.

  • Get CPP language bindings for ev3dev from here and copy the files ev3dev.h and ev3dev.cpp from the repository into the src directory.

  • Store this repository along with the two directories downloaded earlier in a one new folder and name it ev3-ros in your catkin workspace's src directory.

  • Replace time.h and time.cpp files from ros_lib directory with the ones provided here.

  • Install gcc-arm-linux-gnueabi, g++-arm-linux-gnueabi, toolchains(these are the compilers that we use in cross compilation to obtain an executable that will run on the ev3).

  • Now, run

    $ cd ~/<your catkin workspace>/src/ev3-ros/src

    $ source ../setenv.sh ; make all

Note: " make all " compiles all the programs in the src file.
If suppose you want to compile only a specific program, 
run $ make <name of that program> 

These commands will compile the programs written in the src folder and would create an executable for 
the program that can
run in ev3 in  ~/<your catkin workspace>/src/ev3-ros>/bin 
folder   


Important note : When setting up for the first time, make sure you create an empty folder named 'bin' in 
~/catkin_ws/src/ev3-ros directory.

  • Now run the ssh command to connect the host computer and the ev3 brick.

  • Now, to send the executable from the computer to the ev3, in your laptop's terminal run,

    $ cd ~/<your catkin workspace>/src/ev3-ros/bin

    $ scp <executable name> robot@ev3dev.local:/<address of the directory in ev3 to store>

  • Once the executable is copied onto the ev3 go here to
    understand rosserial in embeddedlinux.

  • Now in the ROS workstation run, $ roscore

    In another terminal, $ rosrun rosserial_python serial_node.py tcp

  • In the ev3 ssh terminal,

    $ cd ~/catkin_ws/src/ev3-ros/bin

    $ ./<name of executable>

~/catkin_ws/src/ev3-ros/bin is the place where the cross compiled executablle is instructed to be created at, in the Makefile

  • Increase OUTPUT_SIZE and INPUT_SIZE in ros/node_handle.h incase you face buffer overflow issue. The current
    ROSSerial_EmbeddedLinux available as binary in repositories has a bug in serialization which causes all negative numbers to be converted to 0. This has been fixed in the trunk version. Hence, build rosserial from source code until an updated release is available.

  • When constructing messages in EV3, ensure all variables are initialised. If a message contains an array,
    initialise it with zero if you don't want to use data in that.

Steps to be followed to use rosservices in ev3

  • Look here for a simple rosservice code that runs in the ev3.

  • The important factor in using services is the generation of headerfiles.

    1. First create a ros package called "headers", refer here for creating and building a ros package.

    2. Follow the steps here, for creating header files for ros services

    3. Now to obtain the header file generated, run $ rosrun rosserial_mbed make_libraries.py <address of directory to store>

    4. The above command would create a roslib directory which contains all the header files required by all the packages, in the mentioned address. Inside roslib will be a directory called headers and inside that will be the headerfile we created.

    5. Replace this roslib directory with the roslib in ~/catkin_ws/src/ev3-ros

  • Once the required header files are created, cross compile the services code and copy it onto the ev3, and run the code.

  • To call the services, a client code is not required. Instead run this command in the ros workstation,
    $ rosservice call /<service_name> <arg1> <arg2>...<argn>

Note : The headerfiles required to run the ros services provided in this repository are stored in 'headers' directory in 'roslib' in this repository