Pinned Repositories
6-Pack_CNC_Controller
Arduino-Projects
avr-ay-board
The replacement board for the AY-3-8910/AY-3-8912/YM2149F sound chip. Based on schematic and firmware from https://www.avray.ru project.
ERCF_v2
Community designed ERCF v2
ESP32_FFT_VU
A spectrum analyzer VU meter for the ESP32 and a FastLED matrix
flux
Arduino code for Flux Capacitor LEDs, Speaker, MP3 player, speaker and IR Sensor
Galileo2-cw2-replacement
Grbl_Esp32
A port of Grbl CNC Firmware for ESP32
K40-GRBLcntrlr
K40 ESP32 GRBL Controller
stefi01's Repositories
stefi01/avr-ay-board
The replacement board for the AY-3-8910/AY-3-8912/YM2149F sound chip. Based on schematic and firmware from https://www.avray.ru project.
stefi01/6-Pack_CNC_Controller
stefi01/Arduino-Projects
stefi01/ERCF_v2
Community designed ERCF v2
stefi01/ESP32_FFT_VU
A spectrum analyzer VU meter for the ESP32 and a FastLED matrix
stefi01/flux
Arduino code for Flux Capacitor LEDs, Speaker, MP3 player, speaker and IR Sensor
stefi01/Galileo2-cw2-replacement
stefi01/Grbl_Esp32
A port of Grbl CNC Firmware for ESP32
stefi01/K40-GRBLcntrlr
K40 ESP32 GRBL Controller
stefi01/klipper
Klipper is a 3d-printer firmware
stefi01/klipper_backup
klipper cfg backup files
stefi01/KNOMI
stefi01/Marlin-2.1
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
stefi01/OpenAstroTracker-Firmware
Official firmware for the OpenAstroTracker.
stefi01/raspberry-noaa-v2
V2 of the fantastic Raspberry Pi NOAA setup
stefi01/voron-and-stealthburner
misc stuff
stefi01/voronfiles
my voron files backup
stefi01/walle-replica
Robot and controller code for a replica robot
stefi01/ZX-Interface-2.021
An old-school remake of the ZX Interface 2 with some modern tweaks - mainly by integrating bank switching into the interface itself. Everything done with basic logic chips and components, no magic black boxes in sight.