pyAVRdbg

An attempt of making a gdb rsp server for AVR debuggers with pymcuprog primarily for the new UPDI devices but other protocols supported by pymcuprog can easily be made to work.

Current Features

Stepping
Memory manipulation (viewing and modifying variables)
Hardware and software breakpoints
Reading Registers (including SREG, Stack pointer and program counter)*

*Writing is possible it is just not implemented yet.

Install/Dependencies

avr-gdb
- Recommend using the latest version. If you are compiling it I would looking at the arch community repos buildfile
- Windows users might want to use wsl
libusb might be required as a seperate install
pip3 install --user pymcuprog
- Some form for C++ compiler if you are running python versions higher than 3.6 since pymcuprog needs to compile package with Cython
  - Windows:
    - VC++ 2015.3 v14.00 (v140) installed through Visual Studio

Usage

Debugger server

Ensure debugger/kit is connected
Modify main.py with device name see supported devices and ip or port defines if applicable
start main.py

GDB

avr-gdb (wellNamed).elf
(gdb) target remote IP:Port

Currently Supported Devices

These are all the currently supported devices per 03.06.2020. This list is wholly dependent on pymcuprog's device support since this RSP server only uses general library calls in pymcuprog. As mentioned before ISP devices might also be supported in the future.

Protocol	Device Name
UPDI	atmega4808*
	atmega4809
	attiny416*
	attiny817*
	attiny1607*
	attiny1627*
	attiny3217*
	avr128da28*
	avr128da48
	avr128db48*

*Devices are untested but will most likely work.

Thanks

A huge thanks to Microchip for making pymcuprog available

stemnic/pyAVRdbg