stm32f0xx-hal

stm32f0xx-hal contains a hardware abstraction on top of the peripheral access API for the STMicro STM32F0xx family of microcontrollers.

This crate replaces the stm32f042-hal by a more ubiquitous version suitable for additional families. The idea behind this crate is to gloss over the slight differences in the various peripherals available on those MCUs so a HAL can be written for all chips in that same family without having to cut and paste crates for every single model.

This crate relies on Adam Greig's fantastic stm32f0 crate to provide appropriate register definitions, and implements a partial set of the embedded-hal traits. Some of the implementation was shamelessly adapted from the stm32f103xx-hal crate by Jorge Aparicio.

Collaboration on this crate is highly welcome, as are pull requests!

Supported Configurations

stm32f030 (stm32f030x4, stm32f030x6, stm32f030x8, stm32f030xc)
stm32f031
stm32f038
stm32f042
stm32f048
stm32f051
stm32f058
stm32f070 (stm32f070x6, stm32f070xb)
stm32f071
stm32f072
stm32f078
stm32f091
stm32f098

Getting Started

The examples folder contains several example programs. To compile them, one must specify the target device as cargo feature:

$ cargo build --features=stm32f030x4

To use stm32f0xx-hal as a dependency in a standalone project the target device feature must be specified in the Cargo.toml file:

[dependencies]
cortex-m = "0.7"
cortex-m-rt = "0.7"
stm32f0xx-hal = { version = "0.18", features = ["stm32f030"]}

If you are unfamiliar with embedded development using Rust, there are a number of fantastic resources available to help.

Minimum supported Rust version

The minimum supported Rust version is the latest stable release. Older versions may compile, especially when some features are not used in your application.

Changelog

See CHANGELOG.md.

License