stm32-rs/stm32f7xx-hal

Issues

• FR: Allow generating a Clocks from the current RCC register values

  #215 opened 3 months ago by BryanKadzban
  0

• Compatibility with usbd-serial 0.2.0 and above / usb-device 0.3.0 and above

  #213 opened 3 months ago by Hecatron
  1

• Clock setup code pulls in almost 1K of u64-math builtins

  #211 opened 8 months ago by BryanKadzban
  4

• User manual says to write a low logic state but need to do the opposite

  #208 opened a year ago by paulyoung
  2

• adc?

  #116 opened 4 years ago by pdgilbert
  12

• LTDC DisplayController::draw_rectangle is racy

  #201 opened a year ago by fhars
  1

• Example examples/blinky-timer-irq.rs does not compile

  #200 opened a year ago by zvladimir
  0

• Missing feature: ExtiPin trait on Alternate pins

  #198 opened a year ago by Cryowatt
  0

• Release build does not flashing led

  #193 opened 2 years ago by chessnokov
  0

• Flash rewriting not working properly in "STM32F746" board.

  #191 opened 2 years ago by UdayakumarHidakal
  0

• Time for the next release?

  #185 opened 2 years ago by korken89
  1

• Looking for new maintainers

  #165 opened 2 years ago by hannobraun
  17

• Bits per second

  #173 opened 3 years ago by burrbull
  0

• Serial speed

  #141 opened 3 years ago by burrbull
  0

• Create a changelog

  #56 opened 3 years ago by mvertescher
  0

• Timer example is incorrect

  #163 opened 3 years ago by systec-ms
  6

• Linker scripts are wrong as they place SRAM into DTCM regions.

  #99 opened 3 years ago by matoushybl
  5

• Error in memory.x ?

  #123 opened 3 years ago by rubik83
  0

• Decide on consistent strategy for enabling peripherals

  #154 opened 3 years ago by hannobraun
  0

• Release 0.6.0

  #150 opened 3 years ago by systec-ms
  3

• Test documentation examples in CI

  #148 opened 3 years ago by hannobraun
  0

• Possible typo in maximal frequency.

  #144 opened 3 years ago by matoushybl
  2

• Clocks can no longer be specified in MHz

  #136 opened 3 years ago by rfuest
  3

• Timer interrupts don't trigger on stock Nucleo-F767ZI board.

  #140 opened 3 years ago by lordspacehog
  1

• RngExt::init modifies RCC clock configuration

  #139 opened 3 years ago by rfuest
  1

• LTDC HAL modifies RCC clock settings directly

  #138 opened 3 years ago by rfuest
  1

• Timer Interrupt clear is incorrect

  #122 opened 3 years ago by jonathanpallant
  0

• Timer period is off by one

  #121 opened 3 years ago by jonathanpallant
  0

• Consider setting up dependabot

  #119 opened 4 years ago by hannobraun
  0

• A new version on crates.io

  #117 opened 4 years ago by dutchmartin
  4

• Support for I2S protocol

  #87 opened 4 years ago by ost-ing
  8

• bxcan/defmt version conflict

  #114 opened 4 years ago by pdgilbert
  4

• Support for CAN

  #109 opened 4 years ago by santiagoalvarez
  1

• Spi::enable takes Rcc as a parameter making it impossible to enable SPI after the clocks were frozen.

  #65 opened 4 years ago by pftbest
  1

• LCD example shown black screen (with backlight on)

  #105 opened 4 years ago by mchodzikiewicz
  0

• Implementation for RNG

  #102 opened 4 years ago by hardfau1t
  0

• I2C timing calculation broken

  #71 opened 4 years ago by sentinelt
  2

• usb_fs not enabled for NUCLEO-F767ZI with STM32F767ZI

  #86 opened 4 years ago by rHermes
  3

• Migrate from Travis CI to Github Actions

  #89 opened 4 years ago by mvertescher
  0

• Wrong RAM Size for STM32F7{45,46, 56} models?

  #81 opened 4 years ago by bbrown1867
  0

• SPI hardware nss management and modes settings

  #85 opened 4 years ago by hardfau1t
  2

• UART5 is missing

  #79 opened 4 years ago by ctron
  0

• PLL isn't enabled automatically

  #82 opened 4 years ago by rfuest
  3

• Support display of STM32F723E-DISCO

  #78 opened 4 years ago by ctron
  2

• Pac cannot be brought into scope when compiling with the stm32f769 feature

  #73 opened 4 years ago by seanybaggins
  2

• serial::Config example needs character_match

  #76 opened 4 years ago by pdgilbert
  1

• Add EXTI Example and Provide RCC Support for SYSCFG Clock

  #68 opened 4 years ago by bbrown1867
  1

• Review SPI1 pin config

  #67 opened 4 years ago by mvertescher
  0

• Create generation memory.x for different mcu's in family

  #58 opened 4 years ago by no111u3
  4

• Release 0.2.0

  #55 opened 4 years ago by mvertescher
  5