stm32-rs/stm32g0xx-hal

Issues

• New chip variants have been added to the stm32g0 PAC

  #78 opened 3 years ago by dimpolo
  3

• i2c-nonblocking: how to use?

  #145 opened 7 months ago by jkorinth
  1

• Spelling error `dma_circualr_mode()`

  #143 opened 10 months ago by dauntown
  2

• IWDG prescaler calculation

  #141 opened 2 years ago by NegVorsa
  0

• I2C slave loses data on repeated start condition

  #136 opened 2 years ago by fayalalebrun
  0

• Add G0B1 Variant

  #135 opened 2 years ago by kiranshila
  4

• Help, examples of measuring input signals

  #139 opened 2 years ago by juebanlin
  0

• GPIO - alternate function + open drain

  #132 opened 2 years ago by andrej-mk
  1

• I think FDCAN is missing?

  #127 opened 2 years ago by brandonros
  3

• USART: Support half-duplex mode

  #70 opened 3 years ago by wjbuys
  1

• Invalid clock configuration for apb_clk, apb_tim_clk and core_clk

  #110 opened 2 years ago by keadwen
  3

• Stopwatch::elapsed truncates 32 bit timer TIM2 to 16 bits

  #112 opened 2 years ago by davidlattimore
  0

• Feature: fully erasable pins

  #104 opened 2 years ago by jacobbarssbailey
  2

• unable to build examples (exit status: 101)

  #101 opened 3 years ago by jemo07
  1

• [dependencies.stm32g0xx-hal] produces error during cargo build "uplicate key: `stm32g0xx-hal`"

  #100 opened 3 years ago by jemo07
  2

• timer interrupt fires immediately after being enabled

  #91 opened 3 years ago by danc86
  2

• Feature: add RTIC monotonic impl

  #99 opened 3 years ago by andresv
  0

• Allow output value to be set before configuring pin as an output

  #93 opened 3 years ago by davidlattimore
  4

• Configuring I2C pins causes them to be temporarily pulled low

  #87 opened 3 years ago by davidlattimore
  2

• UnlockedFlash::write memory safety

  #86 opened 3 years ago by davidlattimore
  3

• I2C doesn't send STOP if write_read is called immediately after any other transfer

  #71 opened 3 years ago by davidlattimore
  0

• Timer Stopwatch does not take into account the prescaler

  #56 opened 3 years ago by ijager
  0

• ADC VREFINT calibration values

  #15 opened 3 years ago by ijager
  2

• SO8 package - is it supported?

  #37 opened 4 years ago by nebelgrau77
  5

• Version 0.1.0

  #52 opened 4 years ago by andresv
  2

• PWM: Off-by-one when computing ARR

  #48 opened 4 years ago by davidlattimore
  0

• Incorrect calculation for frequencies PLLQ and PLLP

  #49 opened 4 years ago by davidlattimore
  0

• Blinky does not build

  #28 opened 4 years ago by andresv
  2

• Feature: DMAMUX support

  #12 opened 4 years ago by andresv
  7

• Fix DMA channel count for STM32G071xx and STM32G081xx

  #9 opened 4 years ago by andresv
  1

• feature stm32g07x should be split up

  #18 opened 4 years ago by ijager
  9

• Unexpected result from CRC digest

  #16 opened 4 years ago by hannes-hochreiner
  0

• Feature: ADC over DMA support

  #8 opened 5 years ago by andresv
  0

• Additional maintainer

  #10 opened 4 years ago by andresv
  2

• Next release

  #13 opened 4 years ago by andresv
  1

• Build fails with --features stm32g081

  #6 opened 4 years ago by andresv
  3

• i2c infinite loop when building with optimizations

  #5 opened 5 years ago by ijager
  3

• Next release

  #3 opened 5 years ago by ijager
  2