This repository contains the Symbols, Footprint, and 3D Models for the Espressif SoC and Modules family.
Notice: The libraries are provided in the hope that they will be useful but without a warranty of any kind.
The libraries in this repository are intended to be used with KiCad version 6.
Each footprint library is stored as a directory with the .pretty suffix. The footprint files are .kicad_mod files within.
Before designing your own hardware, be sure to check all recommendations at:
Espressif Hardware Design Guidelines
All footprints were designed according to the Recommended PCB Land Pattern section present on each module datasheet.
The following SoC are included in this library
| SoC | Symbol | Footprint | Resource |
|---|---|---|---|
| ESP32 | Yes | No | Datasheet |
| ESP32-C3 | Yes | No | Datasheet |
| ESP32-PICO-V3 | Yes | No | Datasheet |
| ESP32-S2 | Yes | No | Datasheet |
| ESP32-S3 | Yes | No | Datasheet |
| ESP8286 | Yes | No | Datasheet |
| ESP8285 | Yes | No | Datasheet |
| Module | Symbol | Footprint | Resource |
|---|---|---|---|
| ESP32-C3-MINI-1 | Yes | Yes | Datasheet |
| ESP32-C3-WROOM-02 | Yes | Yes | Datasheet |
| ESP32-S2-MINI-1 | Yes | Yes | Datasheet |
| ESP32-S2-MINI-1U | Yes | Yes | Datasheet |
| ESP32-S2-SOLO | Yes | Yes | Datasheet |
| ESP32-S2-WROOM | Yes | Yes | Datasheet |
| ESP32-S2-WROVER | Yes | Yes | Datasheet |
| ESP32-S3-MINI-1 | Yes | Yes | Datasheet |
| ESP32-S3-MINI-1U | Yes | Yes | Datasheet |
| ESP32-S3-WROOM-1 | Yes | Yes | Datasheet |
| ESP32-S3-WROOM-1U | Yes | Yes | Datasheet |
| ESP32-WROOM-32E | Yes | Yes | Datasheet |
| ESP32-WROOM-32UE | Yes | Yes | Datasheet |
| ESP32-WROVER-E | Yes | Yes | Datasheet |
| Dev Board | Symbol | Footprint | Resource |
|---|---|---|---|
| ESP32-S2-Saola-1 | Yes | Yes | Schematic |
| ESP32-DevKitC | Yes | Yes | Schematic |
| ESP32-S3-DevKitC | Yes | Yes | |
| ESP32-S2-DevKitM | Yes | Yes | Schematic |
If you want to contribute, please consider sending us a Pull Request (PR).
Espressif provides some 3D models to help you with your project inside the 3d folder.
To use the files, you need to create an environment variable add the 3d folder path.
- Open
Open Preferences->Configure Paths... - Create the new variable:
- Name:
ESPRESSIF_3DMODELS - Path:
<PATH_TO_THE_3D_FOLDER>
- Name:
KiCad is a Cross-Platform and Open Source Electronics Design Automation Suite. See KiCad EDA for more information.