Examples can be found in the examples directory, these can also be loaded from the examples menu in the Arduino IDE.
This library can be installed through the Arduino library manager or manually from github by following the instructions here.
// Initializes all Bee S3 board peripherals
void begin();
// Set neopixel power on or off
void setPixelPower(bool on);
// Set neopixel color
void setPixelColor(uint8_t r, uint8_t g, uint8_t b);
void setPixelColor(uint32_t rgb);
// Set neopixel brightness
void setPixelBrightness(uint8_t brightness);
// Pack r,g,b (0-255) into a 32bit rgb color
static uint32_t color(uint8_t r, uint8_t g, uint8_t b);
// Convert a color wheel angle (0-255) to a 32bit rgb color
static uint32_t colorWheel(uint8_t pos);
// Get the battery voltage in volts
float getBatteryVoltage();