SolidWorks Raspberry Pi housing
A set of SolidWorks (2017) parts and an assembly. Uses these parts:
Raspberry Pi 3 ILI9341 2.4" TFT touch display (from AliExpress) 30mm 5V PC fan Standard PTM momentary switch Several M3 machine screws and nuts Female-female SIL jump wires
Finished housing is 42x95x60mm (HxWxD). Lid stays in place without glue.
Case printed (for me, at least) with no supports on PLA. Once printed, use side-cutters to remove the vertial spars between the USB and network socket holes.
Attribution: PTM switch and fan models came from free downloads picked up at GrabCAD.com.