stuartpittaway/diyBMSv4

Issues

• AH counting IN when BMS is isolated from inverter and inverter is powered off

  #194 opened 3 months ago by anthonyevs
  6

• All-in-on zero volt

  #193 opened 3 months ago by botaneta
  2

• few question about diybms

  #192 opened 4 months ago by onlineapps-cloud
  0

• Can i use diyBMS for charging LiPo High Voltage 4.35v 1S-6S Cells?

  #191 opened 4 months ago by DAMskill
  0

• Module V450: POWER1 and POWER2 are same part number, but different pin spacing

  #190 opened 4 months ago by olterion
  1

• Maximum All in One V490

  #189 opened 5 months ago by Michi202020
  8

• How to deal with more than 128 Cells?

  #188 opened 6 months ago by Ipirk88
  4

• Missing MQTT Server results in rebooting

  #187 opened 6 months ago by olterion
  0

• All in One V490 Balancing function

  #186 opened 6 months ago by Michi202020
  2

• Module V490 AIO CPL file is missing all the "J" parts

  #184 opened 7 months ago by JasonMBarnard
  1

• cycle measurement

  #185 opened 7 months ago by buddhafragt
  3

• Current Shunt addon board failed

  #183 opened 8 months ago by anthonyevs
  3

• V490 AiO JLC replacements for C20, D1, U2, U3

  #182 opened 9 months ago by Sebastian-24a
  0

• 4.4 controller D7

  #180 opened 10 months ago by buddhafragt
  3

• Active balancer board v4.90

  #179 opened 10 months ago by emajju
  1

• AQY282SX relay is not longer made

  #170 opened a year ago by stuartpittaway
  4

• Add GTP/GTB files to all gerber scripts

  #177 opened a year ago by stuartpittaway
  0

• diyBMS cooperation with the 160S high-voltage battery

  #175 opened a year ago by PiotrSin
  17

• Fuse F1 on All-in-one board is not rated to 65V

  #172 opened a year ago by Roelaynd
  1

• Severe wifi issues with the pre-release [charge-float]

  #167 opened a year ago by stuartpittaway
  0

• Multiple Symbols missing from ControllerCircuit Project

  #169 opened a year ago by Spacefish
  0

• all-in-one consider using MAX6107EUR+T for 4.5V reference

  #164 opened a year ago by stuartpittaway
  2

• Addon Current shunt board issue (zero voltage and current reading)

  #163 opened a year ago by anthonyevs
  29

• Communication wiring with (1 or more) 16S boards and controller

  #162 opened a year ago by stuartpittaway
  24

• Run away balance feature (all in one monitor) - is it working?

  #168 opened a year ago by chapulino
  2

• Suggestion to add more data to the integration.

  #166 opened a year ago by chapulino
  0

• Error Relay Active balancer activation

  #165 opened a year ago by chapulino
  3

• New ESP32_Devkitc_V4 ESP32-WROOM-DA GPIO2 pin not led out to the module.

  #147 opened a year ago by cor-mt
  1

• LTO Battery

  #152 opened a year ago by Michi202020
  1

• Can the v4.5 modules work with the ESP8266 controller?

  #158 opened a year ago by floreseken
  4

• Consider adding a pdf-file for schematics

  #160 opened a year ago by berrak
  7

• Controller C3/C4 part 4V when should be 6.3V rated

  #142 opened a year ago by stuartpittaway
  0

• v450 module BOM incorrectly has JLCPCB part number for ATTINY1624-XF not ATTINY1624-SSU-ND

  #159 opened a year ago by moscito1010
  5

• AZ432ANTR-E1 is not longer stocked at JLCPCB - replacement part

  #157 opened 2 years ago by moscito1010
  8

• manual BOM is incorrect

  #149 opened 2 years ago by stuartpittaway
  1

• Suggestion: Controller v4.6 Add pull up resistor to U1

  #155 opened 2 years ago by delboy711
  1

• JLCPCB - Ask For Clarification: Polarization of D2, D3 and D4

  #154 opened 2 years ago by addame
  3

• fail from me, please delete

  #151 opened 2 years ago by moscito1010
  0

• Part codes for C1 is an 0402 package and should be 0805

  #150 opened 2 years ago by stuartpittaway
  1

• Change Ina228 to ina229

  #132 opened 2 years ago by Michi202020
  5

• Polarization

  #146 opened 2 years ago by marcin11
  5

• Cell module needs a crystal to be stable

  #145 opened 2 years ago by storfusker
  30

• a question regarding the wiki

  #144 opened 2 years ago by moscito1010
  4

• CPL file of ControllerCircuit 4.5 is diplacing the parts

  #143 opened 2 years ago by olterion
  1

• Component placement issue from JLCPCB

  #130 opened 2 years ago by drawlusyk
  13

• ModuleV450 D2 polarity confusing

  #137 opened 2 years ago by benjolsen
  1

• Wrong C1 part number on new Modulev450

  #136 opened 2 years ago by benjolsen
  1

• JLCPCB Order Issue

  #138 opened 2 years ago by smoeller02-intra
  1

• Negative temperatures in rules

  #135 opened 2 years ago by overkillthemighty
  2

• Schematics on a grid??

  #133 opened 2 years ago by jbuszkie
  1