Pinned Repositories
Arduino_Core_STM32
STM32 core support for Arduino
BIGTREETECH-TFT35-V3.0
TFT35 V3.0 is a medium size, dual-mode, ultra-clear 3D printer display and it is designed by Bigtree Technology co.,LTD. It is an excellent replacement for the standard 12864 LCD displays.
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
Marlin
Optimized firmware for RepRap 3D printers based on the Arduino platform.
MKS-Monster8
MKS Monster8 is an 8-axis motherboard, which supports Voron printers and can run Marlin and Klipper firmware.
MKS-RUMBA32
MKS RUMBA32 is modified in Aus3D RUMBA32 version and a powerful 32-bit 3D printer control board with STM32F446VET6 , The main frequency is 180MHZ. Support Marlin2.0 , support MKS LCD12864B/MINI12864/2004/12864, support MKS TFT24/28/32/35/70 Screens. The motherboard integrates 6 AXIS interface, integrates SPI / UART interface…
MKS-TFT35-Firmware
This MKS TFT35 firmware source code and build by IAR platform ...
MKS_WIFI_upgrade_with_BeePrint_web_interface
Firmware for MKS WiFi module from Makerbase with BeePrint Web Interface, tested with Flying Bear Ghost 5/Ghost 4/Reborn
OctoPrint-EEPROM-Marlin
A plugin for editing the EEPROM data of Marlin Firmware, from within OctoPrint.
Rumba32
studiodyne's Repositories
studiodyne/Arduino_Core_STM32
STM32 core support for Arduino
studiodyne/BIGTREETECH-TFT35-V3.0
TFT35 V3.0 is a medium size, dual-mode, ultra-clear 3D printer display and it is designed by Bigtree Technology co.,LTD. It is an excellent replacement for the standard 12864 LCD displays.
studiodyne/BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
studiodyne/Marlin
Optimized firmware for RepRap 3D printers based on the Arduino platform.
studiodyne/MKS-Monster8
MKS Monster8 is an 8-axis motherboard, which supports Voron printers and can run Marlin and Klipper firmware.
studiodyne/MKS-RUMBA32
MKS RUMBA32 is modified in Aus3D RUMBA32 version and a powerful 32-bit 3D printer control board with STM32F446VET6 , The main frequency is 180MHZ. Support Marlin2.0 , support MKS LCD12864B/MINI12864/2004/12864, support MKS TFT24/28/32/35/70 Screens. The motherboard integrates 6 AXIS interface, integrates SPI / UART interface…
studiodyne/MKS-TFT35-Firmware
This MKS TFT35 firmware source code and build by IAR platform ...
studiodyne/MKS_WIFI_upgrade_with_BeePrint_web_interface
Firmware for MKS WiFi module from Makerbase with BeePrint Web Interface, tested with Flying Bear Ghost 5/Ghost 4/Reborn
studiodyne/OctoPrint-EEPROM-Marlin
A plugin for editing the EEPROM data of Marlin Firmware, from within OctoPrint.
studiodyne/Rumba32
studiodyne/RUMBA32-1
A powerful 32-bit 3D printer control board.