su2code/SU2

Issues

• Restart file interpolation sporadically hangs with mpi

  #2225 opened a month ago by bigfooted
  2

• Non-Restart Unsteady `Time`, `TimeIter`, and IC Outputs Not Correct?

  #2353 opened a month ago by j-signorelli
  1

• Improve ninja system-wide detection

  #2364 opened a month ago by carlosal1015
  1

• Potential memory leak in PyWrapper

  #2386 opened a month ago by HahsFilip
  1

• SST omega is wrong in sharp corners

  #2383 opened 2 months ago by bigfooted
  13

• Symmetry BC not working

  #2390 opened a month ago by rois1995
  14

• Add additional checks with warning/error messages for turbomachinery cases.

  #2378 opened 2 months ago by bigfooted
  7

• High metadata and file operations impacting HPC system stability due to SU2 simulation

  #2389 opened a month ago by himakarganti
  1

• Flow file writing is extremely slow

  #2387 opened a month ago by koodlyakshay
  6

• KIND_TRANS_MODEL= LM with SOLVER = NAVIER_STOKES causes Segmentation Fault

  #2377 opened 2 months ago by emab123
  2

• Viscous walls with euler solver gives error when writing output files.

  #2374 opened 2 months ago by bigfooted
  1

• Bug with Implementing Internal Surfaces in SU2

  #2336 opened 5 months ago by gkhokhar01
  2

• MARKER_ENGINE_INFLOW seems to be not working as intended.

  #2274 opened 2 months ago by BerkeCan97
  3

• Incorrect Descriptions for enable-mlpcpp and enable-gprof in Meson Options

  #2366 opened 2 months ago by kjrstory
  3

• Correct gradients at boundaries

  #2285 opened 8 months ago by GiuSirianni
  15

• Jacobian not recorded correctly in AD preaccumulation region

  #2368 opened 3 months ago by joshkellyjak
  1

• SU2 not getting all external dependencies

  #2363 opened 3 months ago by nikishe
  1

• New in version 8 in docs

  #2361 opened 3 months ago by stefano2734
  3

• Accurate heat flux predictions require extremely small first cell spacing

  #2347 opened 4 months ago by Hanquist
  1

• Jacobian of BC_HeatFlux_Wall in TurbSASolver

  #2342 opened 5 months ago by Wang-Lancelot
  4

• Bug in HLLC Jacobian calculation

  #2198 opened 5 months ago by ashwaniassam
  2

• Thread Sanitizer CI Crashes

  #2241 opened 5 months ago by jblueh
  0

• Non deterministic convergence history using NEWTON-KRYLOV with OMP

  #2259 opened 5 months ago by tbellosta
  2

• Add Supersonic Inlet Profile

  #2275 opened 5 months ago by ShukaiWang1110
  2

• When I use more than two cores, the following error occurs when running the code

  #2316 opened 5 months ago by crazyfireji
  3

• When I use a C-type-mesh to simulate my case (such as NACA0012), do I need to merge two wake domain?

  #2322 opened 5 months ago by crazyfireji
  0

• High Mach Number Anomalies and Convergence Issues in Hypersonic Simulations Using JST Scheme

  #2330 opened 6 months ago by Bot-Enigma-0
  0

• How to obtain a average field when I calculate a unsteady case, such as turb_ONERAM6

  #2318 opened 6 months ago by crazyfireji
  0

• Aachen Turbine Test Case

  #2276 opened 7 months ago by jblueh
  5

• FSI - Issue with `pysu2_nastran.py` when Reading SET1 from Complex Nastran .f06 Files

  #2313 opened 7 months ago by safadumanli
  0

• Shape Design Tutorial Error

  #2307 opened 7 months ago by peb5234
  0

• MARKER_RIEMANN Boundary Problem

  #2305 opened 7 months ago by safdarianebi
  0

• Muscl reconstruction for flow variables applied twice when scalar_upwind scheme is used

  #2297 opened 7 months ago by Cristopher-Morales
  2

• About Binary Executables' error

  #2288 opened 8 months ago by dlyltm
  1

• To invoke SU2 from c++

  #2286 opened 8 months ago by dlyltm
  1

• SU2 V8.01: Apparently improper message: DV_VALUE does not contain enough entries to match DV_KIND or DV_PARAM.

  #2265 opened 9 months ago by jaspe55
  2

• SU2 V8 missing functions in PythonWrapper

  #2263 opened 9 months ago by Igarizza
  1

• 3D Flow around object example

  #2261 opened 9 months ago by BimwerxNZ
  0

• Interface between the moving and stationary zones generates wrong results as the moving zone rotates

  #2255 opened 9 months ago by a3adam
  8

• Is it possible to calculate the flow field directly without outputting the mesh after the mesh is deformed?

  #2254 opened 9 months ago by Zcaic
  0

• Parallel Computation fails

  #2247 opened 10 months ago by ole-alb
  0

• Question regarding Description of available screen/history output fields

  #2236 opened 10 months ago by lei866
  2

• Wall emissivity array out of bounds

  #2211 opened a year ago by maxaehle
  1

• Instability with Riemann BC, possibly coupled with periodics?

  #2218 opened a year ago by rpuenter
  0

• Using surface deformation to produce pitching on a surface with two or more markers results on inaccurate displacements on shared nodes between markers

  #2215 opened a year ago by Cnevesg
  5

• Drag Coefficinet is too high

  #2217 opened a year ago by safdarianebi
  0

• Wrong spanwise sections calculation in Turbomachinery simulation

  #2203 opened a year ago by LorenzoFabris
  4

• FileNotFoundError: [Errno 2] No such file or directory:

  #2204 opened a year ago by safdarianebi
  2

• Issue while running SU2 code with Intel OneAPI compiler

  #2201 opened a year ago by shunido
  0

• ./ninja -C build install error

  #2199 opened a year ago by vanessachung97
  1