suchmememanyskill/CYD-Klipper

Issues

• ESP32-S3 support

  #126 opened 3 months ago by yzheka
  6

• Support for Elecrow 3248R035

  #116 opened 6 months ago by Simone-Ludovici
  2

• Feature Request? Serial Connection to Pi instead of Wifi

  #100 opened 7 months ago by thomasfjen
  35

• ESP32-8048S070C support ?

  #98 opened 8 months ago by Ramsy504
  10

• newest build. extrude/retract buttons dont work

  #132 opened a month ago by KennyVB
  4

• Layer number not updating

  #130 opened 2 months ago by btwebz
  2

• ESP32-3248S035C - Hardware Interrupt for GT911

  #129 opened 2 months ago by pepe-el-pepe
  3

• Add 0.5s delay after wake from sleep mode

  #128 opened 2 months ago by ekorolkov
  3

• Setting for screen-off time (including not ever turning the screen off)

  #127 opened 3 months ago by McNugget6750
  2

• [Suggestion] Add ability to enter SSID with space

  #123 opened 5 months ago by tit
  4

• First printer "offline" when adding second printer

  #120 opened 5 months ago by jangrewe
  5

• Serial console

  #115 opened 5 months ago by bwucke
  5

• Failed to connect

  #121 opened 5 months ago by fylhtq7779
  5

• Failed to connect

  #118 opened 5 months ago by donutboy3
  4

• touch screen doesn't work

  #119 opened 5 months ago by joaomarques328
  0

• Web install failure ...

  #67 opened 6 months ago by themacboy
  7

• ESP32-3248S035 Webinstall and PlatformIO failing

  #109 opened 6 months ago by ohyeah8000
  3

• Ability to make folders in macros menu

  #89 opened 6 months ago by szafranski
  5

• Screen not connected to the Wi-Fi after wakeup

  #82 opened 6 months ago by szafranski
  3

• Files list available when printing

  #80 opened 6 months ago by szafranski
  3

• Blank screen on 3248S035C

  #60 opened 6 months ago by feletoch
  12

• Support for DNS and HTTPS (and self-signed certificates)

  #106 opened 7 months ago by Abrynos
  6

• ESP32-8048S043C not programming and not stable usb connection

  #105 opened 7 months ago by eagl1
  17

• Macros for Extrude/Retract.

  #101 opened 7 months ago by FeromonDE
  8

• Move menu issues

  #99 opened 7 months ago by RH3D
  5

• "Board not supported" 4.3" ESP32-8048S043C

  #96 opened 7 months ago by dkGoodrich
  1

• ESP32-4827S043C Manual flash

  #97 opened 7 months ago by fanatykCZ516
  3

• Programming ESP32-3248S035C with Arduino C++ code

  #102 opened 7 months ago by eagl1
  9

• Not all data is displayed on the screen

  #92 opened 8 months ago by szafran81
  13

• Layer info popup overlaping close button.

  #84 opened 8 months ago by RH3D
  4

• Bootloop while/on connecting to moonraker

  #88 opened 8 months ago by szafran81
  11

• Crash when transitioning from idle to offline state

  #86 opened 8 months ago by suchmememanyskill
  0

• Web upload not work on my slightly odd CYD

  #85 opened 8 months ago by alanvgreen
  4

• Screen badly calibrated after initial setup

  #81 opened 9 months ago by szafranski
  3

• "Printer is not ready" Error

  #71 opened 9 months ago by crazy-hair
  3

• Unclear "timing" indications

  #72 opened 9 months ago by Misterke
  4

• Custom buttons

  #74 opened 9 months ago by szafranski
  5

• No way to power "other" printer when having 2 and both are powered off

  #69 opened 9 months ago by Misterke
  10

• Missing a exit button ...

  #68 opened 9 months ago by themacboy
  1

• Intermittent WiFi Connection Drops

  #70 opened 9 months ago by Darkstar77
  5

• Screen usage without the Wi-Fi (direct connection)

  #79 opened 9 months ago by szafranski
  2

• Feature Request: Support for printers with 2 or more hotends/extruders

  #76 opened 9 months ago by StijnMut
  0

• Hello, can you support Chinese display

  #55 opened 10 months ago by 84864797
  3

• All macros are missing

  #77 opened 9 months ago by systemerror-codenotfound
  3

• [Enhancement/Feature Request] Request for board ESP32-2432S024.

  #61 opened 9 months ago by Shalasere
  33

• [Enhancement/Feature Request] Request for emergency stop button

  #65 opened 9 months ago by aam335
  1

• Layer is always 0/0

  #64 opened 9 months ago by aam335
  3

• Layer progress not shown

  #59 opened 10 months ago by szafranski
  4

• Installing DEV to 4.3 inch display, with Platformio, fail.

  #58 opened 10 months ago by GAZ082
  1

• Calibration only works properly if screen is not rotated

  #56 opened 10 months ago by suchmememanyskill
  1