Issues
- 1
bug(hvs): non-standard resistor values
#113 opened by t-bre - 0
bug(vcu): R2D and VC LED outputs swapped
#112 opened by t-bre - 0
bug(bspd): shutdown connector silkscreen swapped
#109 opened by saltyboi2995 - 0
bug(hvs): incorrect silkscreen for PS1
#100 opened by Scaniox - 0
chore: update to KiCad 7
#94 opened by t-bre - 0
- 0
- 0
- 0
feat(vcu): add connections for shield grounds
#73 opened by t-bre - 0
feat(vcu): add steering angle sensor input
#72 opened by t-bre - 0
feat(bspd): add indicator LEDs
#66 opened by t-bre - 0
- 0
bug(bspd): bad footprint for transistor
#65 opened by t-bre - 1
bug(hvs): missing / modified symbols
#80 opened by t-bre - 0
feat(latching): add labels
#67 opened by t-bre - 0
feat(vcu): pull down SCS inputs
#70 opened by t-bre - 0
bug(latching): IMD input not pulled down
#69 opened by t-bre - 2
bug(latching): latching mechanic not working
#47 opened by Mxrxk - 0
bug(latching): signals latch to wrong state
#68 opened by t-bre - 1
- 0
bug(vcu): Molex connectors should be reversed
#45 opened by t-bre - 1
- 0
- 0
bug(vcu): analogue inputs not buffered
#54 opened by t-bre - 0
bug(vcu): 5V regulator tab is not ground
#49 opened by t-bre - 0
feat(vcu): update DRS servo hardware to 12V
#53 opened by t-bre - 0
bug(vcu): output optocoupler at 3.3V instead of 12V
#55 opened by t-bre - 0
bug(tsal): Molex connectors should be reversed
#46 opened by t-bre - 0
bug(tsal): not enough connections for LED outputs
#34 opened by t-bre - 0
- 1
feat: import existing designs
#6 opened by t-bre - 0
- 0
- 1
- 0
- 0
- 1
bug(vcu): CAN transceiver not 3.3V compatible
#3 opened by t-bre - 0
feat(vcu): update to STM32-F746ZG board
#1 opened by t-bre - 0
feat(vcu): add EEPROM memory
#2 opened by t-bre - 0
docs: add repo usage instructions to README
#11 opened by t-bre - 0
chore: create pull request template
#13 opened by t-bre