Scann3r

Scann3r is a firmware and user interface for the OpenScan Mini

Quick Install

(Only tested on Raspberry Pi OS (32-bit) Lite / Debian Buster yet.)

bash <(curl -s https://raw.githubusercontent.com/sui77/scann3r/master/install.sh)

Manual Install

Dependencies

First install all dependencies.

sudo apt update && sudo apt install -y zip git nodejs npm pigpio redis-server imagemagick supervisor

Setup Raspberry Camera

If your camera is not set up yet, you need to enable it and reboot.

sudo raspi-config nonint do_camera 0
reboot

Install Scann3r

Checkout the source and run the update script which will get the latest release. You should do that as user pi.

cd /home/pi
git clone https://github.com/sui77/scann3r.git
cd scann3r
./update.sh

Setup supervisor

Supervisor will start Scann3r on boot and keep it running. If you installed it in a different directory than /home/pi/scann3r or want to run Scann3r as a different user than pi then you'll need to edit the configuration file.

sudo ln -s /home/pi/scann3r/scann3r-supervisor.conf /etc/supervisor/conf.d/scann3r-supervisor.conf
sudo supervisorctl update