A simple program to control the brightness of the Apple Studio Display (2022) on Linux.
Based on acdcontrol by Pavel Gurevich.
Make sure you have installed the necessary packages in your distribution, e.g. sudo apt install build-essential on Ubuntu.
Run make. A new file asdcontrol should appear in the same directory.
Use sudo make install to install the compiled program in /usr/local/bin/asdcontrol.
./asdcontrol [--silent|-s] [--brief|-b] [--help|-h] [--about|-a] [--detect|-d] [--list-all|-l] <hid device(s)> []
-s, --silent
Suppress non-functional program output
-b, --brief
Only output the brightness level when no absolute or relative brightness is provided in the command line.
-h, --help
Display the built-in help message
-a, --about
Display the copyright and license information.
-d, --detect
Detect the Apple Studio Display HID device. You must also provide /dev/usb/hiddev* (or /dev/hiddev*, depending on your Linux distribution) in the command line for the detection to do anything useful.
-l, --list-all
Lists all supported monitor models and quits. Currently, this is just the Apple Studio Display (2022).
<brightness>
When this option is not provided, the program will read and report the current brightness level of the monitor.
When this option is set, the program will set the brightness to the option's value. You can use a relative brightness level by prefixing the option value with + to increase the brightness by this much, or - to decrease the brightness by this much. Please note that you must place -- before a negative value. See the examples.
The brightness is an integer (whole number). For the Apple Studio Display (2022) this can be between 400 and 60000. Not all values result in a visible backlight power change. It appears that the granularity is around 2980 (for a total of 20 brightness steps from lowest to highest brightness) for the 2022 Apple Studio Display.
Alternatively, you can use a percentage e.g. 20% to set the brightness to this monitor-specific level. You can of course prefix by + or - to increase or decrease, respectively, the brightness by this amount.
Assuming that your monitor's device is /usb/dev/hiddev0 here are some usage examples:
asdcontrol --help
Show the built-in help message.
asdcontrol --about
Show the copyright and license information.
asdcontrol --detect /dev/usb/hiddev*
Detect the device which corresponds to your Apple Studio Display.
asdcontrol /usb/dev/hiddev0
Read and report the current brightness level.
asdcontrol /usb/dev/hiddev0 10000
Set the brightness to 30000; that's about 50% brightness. The range of values for Apple Studio Display is 400 to 60000.
asdcontrol /dev/hiddev0 +5960
Increment current brightness by 5960 (that's a 10% brightness increase).
asdcontrol /dev/hiddev0 -- -5960
Decrement current brightness by 5960 (that's a 10% brightness decreate). Please note the -- before the negative number. Without the double dash, a single dash (‘tack’) is understood as setting an option, therefore it won't work.
This program only control the Apple Studio Display (2022).
To make sure that the Apple Studio Display is recognised correctly by the kernel's USB subsystem run lsusb | grep 05ac:1114. It should reply with something like the following (the bus and device may be different on your system):
Bus 005 Device 003: ID 05ac:1114 Apple, Inc. Studio Display
The stuff next to the ID is the USB vendor identifier, followed by a colon, followed by the USB product identifier, followed by a space and the product description as returned by the connected device. This program looks for the vendor identifier 05ac (Apple, Inc) and the product ID 1114 (Apple Studio Display, 2022 model).
If you want to control an older Apple monitor please look at https://github.com/yhaenggi/acdcontrol.
This program checks that the HID device you provided in the command line implements the USB Monitor Control interface. If it doesn't, it returns the error “This device is not a USB monitor”.
Try using a different USB HID device. The one you are using does not correspond to your Apple Studio Display.
If you get Permission denied trying to use this program you have a permissions issue. You need write permissions to the Apple Studio Display's HID device to be able to control its brightness if you are not root.
The correct way to address this is to create a new file /etc/udev/rules.d/50-apple-studio.rules with the contents:
KERNEL=="hiddev*", ATTRS{idVendor}=="05ac", ATTRS{idProduct}=="1114", GROUP="users", OWNER="root", MODE="0660"
Afterwards, reload the udev permissions with sudo udevadm control --reload-rules.
The program checks if the HID device you have provided is a known model (based on the USB vendor and product IDs reported by the device) and whether it supports HID Monitor Control. As a result it should be safe to use against the wrong HID device; it will simply tell you something like “This device is not a USB monitor!”.
This also means that if you are not sure which HID device is your Apple Studio Display you can run this program against /dev/usb/hiddev* (or /dev/hiddev*, depending on your Linux distribution), i.e. tell it to go through all known HID devices. The program will operate only against the HID devices which correspond to an Apple Studio Display.
Currently, the display detection process is not fully automated as you need to specify a HID device path. You can, of course, use /dev/usb/hiddev* (or /dev/hiddev*, depending on your Linux distribution) to have the program go through the entire list of HID devices connected to the computer. This is generally safe, albeit a tad slow. If you have more than one Apple Studio Display monitors it will also apply the brightness controls to both monitors which might not be what you intended to do.
This program only controls the monitor brightness. The Apple Studio Display monitor does not expose any controls for contrast, saturation etc. Moreover, this program cannot be used to update the monitor's firmware or change the camera settings such as Center Stage; this is only possible through macOS (the monitor essentially runs a cut-down version of iOS).