A QR code scanner component for React Native built on top of react-native-camera by Lochlan Wansbrough
Please note, this will also function as a generic barcode scanner by the virtue of the above module supporting barcode scanning, however, this module was initially built as a QR code scanner.
This module was originally written because the author couldn't find a module that could be simply plugged into a project without requiring too much setup.
Looking for active contributors. See Contribution guide for more details.
Please note: Most of the support on debugging new issues, especially with Android, relies on the open source community. The project is on the look out for active contributors who want to maintain this library more rigorously.
With iOS 10 and higher you need to add the "Privacy - Camera Usage Description" key to the info.plist of your project. This should be found in 'your_project/ios/your_project/Info.plist'. Add the following code:
<key>NSCameraUsageDescription</key>
<string>Your message to user when the camera is accessed for the first time</string>
<!-- Include this only if you are planning to use the camera roll -->
<key>NSPhotoLibraryUsageDescription</key>
<string>Your message to user when the photo library is accessed for the first time</string>
<!-- Include this only if you are planning to use the microphone for video recording -->
<key>NSMicrophoneUsageDescription</key>
<string>Your message to user when the microsphone is accessed for the first time</string>
With Android 7 and higher you need to add the "Vibration" permission to your AndroidManifest.xml of your project. This should be found in your android/app/src/main/AndroidManifest.xml Add the following:
<uses-permission android:name="android.permission.VIBRATE"/>
You need to add the "missingDimensionStrategy" config for the 'react-native-camera' setting to 'general', this should be found in your android/app/build.gradle add the following:
android {
...
defaultConfig {
...
missingDimensionStrategy 'react-native-camera', 'general' <-- insert this line
}
}
react-native-camera is a dependency for this package that you'll need to add to your project. To install, run the following commands:
npm install react-native-camera --savereact-native link react-native-camera
If using an older version of this module with RCTCamera you will need to follow the docs here to move from the old RCTCamera to the new RNCamera. You will then need to install it as above.
Versions of this library > 0.0.30 will not support react-native-camera versions less than 1.0.0.
npm install react-native-qrcode-scanner --savereact-native link react-native-qrcode-scanner
You will also need to install react-native-permissions to handle camera related permissions
npm install react-native-permissions --savereact-native link react-native-permissions
For iOS, as part of the react-native-permissions setup you will need to add the following code to your Podfile
permissions_path = '../node_modules/react-native-permissions/ios'
pod 'Permission-Camera', :path => "#{permissions_path}/Camera"
You may also need to reset your simulator data after adding those permissions Device -> Erase All Content and Settings...
To use react-native-qrcode-scanner, import the react-native-qrcode-scanner module and use the <QRCodeScanner /> tag. More usage examples can be seen under the examples/ folder.
Here is an example of basic usage:
'use strict';
import React, { Component } from 'react';
import {
AppRegistry,
StyleSheet,
Text,
TouchableOpacity,
Linking
} from 'react-native';
import QRCodeScanner from 'react-native-qrcode-scanner';
import { RNCamera } from 'react-native-camera';
class ScanScreen extends Component {
onSuccess = e => {
Linking.openURL(e.data).catch(err =>
console.error('An error occured', err)
);
};
render() {
return (
<QRCodeScanner
onRead={this.onSuccess}
flashMode={RNCamera.Constants.FlashMode.torch}
topContent={
<Text style={styles.centerText}>
Go to{' '}
<Text style={styles.textBold}>wikipedia.org/wiki/QR_code</Text> on
your computer and scan the QR code.
</Text>
}
bottomContent={
<TouchableOpacity style={styles.buttonTouchable}>
<Text style={styles.buttonText}>OK. Got it!</Text>
</TouchableOpacity>
}
/>
);
}
}
const styles = StyleSheet.create({
centerText: {
flex: 1,
fontSize: 18,
padding: 32,
color: '#777'
},
textBold: {
fontWeight: '500',
color: '#000'
},
buttonText: {
fontSize: 21,
color: 'rgb(0,122,255)'
},
buttonTouchable: {
padding: 16
}
});
AppRegistry.registerComponent('default', () => ScanScreen);Screenshot of the above:
Please open an issue if something doesn't work or is not clear enough.
Call this method to programmatically enabling scanning again. Use this by attaching a ref like so <QRCodeScanner ref={(node) => { this.scanner = node }}> and calling this.scanner.reactivate()
propType: func.isRequired
default: (e) => (console.log('QR code scanned!', e))
Will call this specified method when a QR code or a barcode is detected in the camera's view passing in the event emitted upon reading the code.
propType: bool
default: true
When set to true this ensures that the camera view fades in after the initial load up instead of being rendered immediately.
Set this to false to prevent the animated fade in of the camera view.
propType: bool
default: false
When set to false, when a QR code is scanned, the QRCodeScanner will not scan another code until it is re-rendered.
When set to true this will reactivate the scanning ability of the component.
propType: number
default: 0
Use this to configure how long it should take (in milliseconds) before the QRCodeScanner should reactivate.
propType: number
default: 0
Use this to configure how long it should take (in milliseconds) before the QRCodeScanner should be displayed. After that the camera will be inactive and press the view to reactivate it.
The 0 default means it's always on.
propType: element
Pass an RN element/component to show it when the camera is inactive for cameraTimeout (another prop) milliseconds. If the cameraTimeout is 0 or not specified, this prop will never be used.
propType: RNCamera.Constants.FlashMode
default: RNCamera.Constants.FlashMode.auto
Flash modes
FYI: react-native-camera/flashMode
RNCamera.Constants.FlashMode.offturns it off.RNCamera.Constants.FlashMode.onmeans camera will use flash in all photos taken.RNCamera.Constants.FlashMode.autoleaves your phone to decide when to use flash when taking photos, based on the lightning conditions that the camera observes.RNCamera.Constants.FlashMode.torchturns on torch mode, meaning the flash light will be turned on all the time (even before taking photo) just like a flashlight.
propType: oneOfType([ PropTypes.element, PropTypes.string, ])
Use this to render any additional content at the top of the camera view.
propType: oneOfType([ PropTypes.element, PropTypes.string, ])
Use this to render any additional content at the bottom of the camera view.
propType: any
Use this to pass styling for the outermost container. Useful for adding margin/padding to account for navigation bar.
propType: any
Use this to pass or overwrite styling for the camera window rendered.
propType: any
Use this to pass or overwrite styling for the camera container (view) window rendered.
propType: any
Use this to pass or overwrite styling for the <View> that contains the topContent prop.
propType: any
Use this to pass or overwrite styling for the <View> that contains the bottomContent prop.
propType: boolean
default: false
Use this to show marker on the camera scanning window.
propType: element
Pass a RN element/component to use it as a custom marker.
propType: any
Use this to add custom styling to the default marker.
propType: element
Pass a RN element/component to use it when no permissions given to the camera (iOS only).
propType: oneOf(['front', 'back'])
default: 'back'
Use this to control which camera to use for scanning QR codes, defaults to rear camera.
propType: bool
default: false
Use this to enable permission checking on Android 6
propType: string
default: 'Info'
Use this to set permission dialog title (Android only).
propType: string
default: 'Need camera permission'
Use this to set permission dialog message (Android only).
propType: string
default: 'OK'
Use this to set permission dialog button text (Android only).
propType: object
Properties to be passed to the Camera component.
This project exists thanks to all the people who contribute. We're immensely gratetful to everyone who has taken the time to submit pull requests, spent time debugging or filing issues.
Most of the core contributors maintain this library, add new features, and review PRs in their free time. If you're using react-native-qrcode-scanner in a commercial app, or have found it to be valuable, please considering backing or sponsoring the project on OpenCollective. Please note that you do not need to give any amount of money in order to use this library.
This is how the donations will be used:
- Allow the core contributors to work on react-native-qrcode-scanner
- Thank contributors if they invested a large amount of time in contributing
- Setup a contributor bounty program to encourage participation
- Fees for money handling
Thank you to all our backers & sponsors! 🙏
[Become a backer] [Become a sponsor]
Support this project by becoming a sponsor. Your logo will show up here with a link to your website.
See LICENSE.md
Thanks to Lochlan Wansbrough for the react-native-camera module which provided me with an awesome example of how to set up this module.
This QR code scanner was inspired by the QR code scanner within Whatsapp.