haskell-language-server

Integration point for ghcide and haskell-ide-engine. One IDE to rule them all. Read the project's background.

This is very early stage software.

Haskell Language Server (HLS)

Features

Code evaluation (inspired by Dante)
Type information and documentation on hover. Note that currently, in order for docs to be displayed for dependencies, they must have been built with GHC's -haddock flag:
- For cabal:
  - Add to your global config file (e.g. ~/.cabal/config):
```
program-default-options
  ghc-options: -haddock
```
  - Or, for a single project, run cabal configure --ghc-options=-haddock
- For stack, add to global $STACK_ROOT\config.yaml, or project's stack.yaml:
```
ghc-options:
  "$everything": -haddock
```
This will cause compilation errors if a dependency contains invalid Haddock markup, though in a future version of GHC (hopefully 8.12), these will be demoted to warnings.
Many more (TBD)

Installation

Prerequisites

For standalone .hs/.lhs files, ghc must be installed and on the PATH. The easiest way to install it is with ghcup or Chocolatey on Windows.
For Cabal based projects, both ghc and cabal-install must be installed and on the PATH. It can also be installed with ghcup or Chocolatey on Windows.
For Stack based projects, stack must be installed and on the PATH.

Visual Studio Code

If you are using Visual Studio Code, the Haskell extension will automatically download and install haskell-language-server for you.

Pre-built binaries

There are pre-built binaries available from the releases page for Linux, Windows and macOS. To install, download the haskell-language-server-wrapper executable for your platform as well as any haskell-language-server executables for the GHC versions you plan on working with, and either put them on your PATH or point your client to them.

Installation from source

Common pre-requirements

stack or cabal must be in your PATH
- You need stack version >= 2.1.1 or cabal >= 2.4.0.0
git must be in your PATH
The directory where stackor cabal put the binaries must be in you PATH:
- For stack you can get it with stack path --local-bin
- For cabal it is by default $HOME/.cabal/bin in linux and %APPDATA%\cabal\bin in windows.

Tip: you can quickly check if some command is in your path by running the command. If you receive some meaningful output instead of "command not found"-like message then it means you have the command in PATH.

Linux-specific pre-requirements

On Linux you will need install a couple of extra libraries:

Debian 9/Ubuntu 18.04 or earlier:

sudo apt install libicu-dev libtinfo-dev libgmp-dev zlib1g-dev

Debian 10/Ubuntu 18.10 or later:

sudo apt install libicu-dev libncurses-dev libgmp-dev zlib1g-dev

Fedora:

sudo dnf install libicu-devel ncurses-devel zlib-devel

Windows-specific pre-requirements

In order to avoid problems with long paths on Windows you can do either one of the following:

Clone the haskell-language-server to a short path, for example the root of your logical drive (e.g. to C:\hls). Even if you choose C:\haskell-language-server you could hit the problem. If this doesn't work or you want to use a longer path, try the second option.
If the Local Group Policy Editor is available on your system, go to: Local Computer Policy -> Computer Configuration -> Administrative Templates -> System -> Filesystem set Enable Win32 long paths to Enabled. If you don't have the policy editor you can use regedit by using the following instructions here. You also need to configure git to allow longer paths by using unicode paths. To set this for all your git repositories use git config --system core.longpaths true (you probably need an administrative shell for this) or for just this one repository use git config core.longpaths true.

In addition make sure haskell-language-server.exe is not running by closing your editor, otherwise in case of an upgrade the executable can not be installed.

Download the source code

git clone https://github.com/haskell/haskell-language-server --recurse-submodules
cd haskell-language-server

Building

Note, on first invocation of the build script with stack, a GHC is being installed for execution. The GHC used for the install.hs can be adjusted in ./install/stack.yaml by using a different resolver.

Available commands can be seen with:

stack ./install.hs help

Remember, this will take time to download a Stackage-LTS and an appropriate GHC for build haskell-language-server the first time.

Install via cabal

The install-script can be invoked via cabal instead of stack with the command

cabal v2-run ./install.hs --project-file install/shake.project <target>

or using the existing alias script

./cabal-hls-install <target>

Running the script with cabal on windows requires a cabal version greater or equal to 3.0.0.0.

For brevity, only the stack-based commands are presented in the following sections.

Install specific GHC Version

Install haskell-language-server for the latest available and supported GHC version (and hoogle docs):

stack ./install.hs hls

Install haskell-language-server for a specific GHC version (and hoogle docs):

stack ./install.hs hls-8.8.3
stack ./install.hs data

The Haskell Language Server can also be built with cabal v2-build instead of stack build. This has the advantage that you can decide how the GHC versions have been installed. To see what GHC versions are available, the command cabal-hls-install ghcs can be used. It will list all supported GHC versions that are on the path for build with their respective installation directory. If you think, this list is incomplete, you can try to modify the PATH variable, such that the executables can be found. Note, that the targets hls and data depend on the found GHC versions.

An example output is:

> ./cabal-hls-install ghcs
******************************************************************
Found the following GHC paths:
ghc-8.6.5: /opt/bin/ghc-8.6.5
ghc-8.8.3: /opt/bin/ghc-8.8.3

******************************************************************

If your desired ghc has been found, you use it to install haskell-language-server.

./cabal-hls-install hls-8.6.5
./cabal-hls-install data

Project Configuration

For a full explanation of possible configurations, refer to hie-bios/README.

haskell-language-server has some limited support via hie-bios to detect automatically your project configuration and set up the environment for GHC. The plan is to improve it to handle most use cases.

However, for now, the more reliable way is using a hie.yaml file in the root of the workspace to explicitly describe how to setup the environment. For that you need to know what components have your project and the path associated with each one. So you will need some knowledge about stack or cabal components.

You also can use this utility to generate automatically hie.yaml files for the most common stack and cabal configurations

For example, to state that you want to use stack then the configuration file would look like:

cradle:
  stack:
    component: "haskell-language-server:lib"

If you use cabal then you probably need to specify which component you want to use.

cradle:
  cabal:
    component: "lib:haskell-language-server"

If you have a project with multiple components, you can use a cabal-multi cradle:

cradle:
  cabal:
    - path: "./test/functional/"
      component: "haskell-language-server:func-test"
    - path: "./test/utils/"
      component: "haskell-language-server:hls-test-utils"
    - path: "./exe/Main.hs"
      component: "haskell-language-server:exe:haskell-language-server"
    - path: "./exe/Wrapper.hs"
      component: "haskell-language-server:exe:haskell-language-server-wrapper"
    - path: "./src"
      component: "lib:haskell-language-server"
    - path: "./ghcide/src"
      component: "ghcide:lib:ghcide"
    - path: "./ghcide/exe"
      component: "ghcide:exe:ghcide"

Equivalently, you can use stack:

cradle:
  stack:
    - path: "./test/functional/"
      component: "haskell-language-server:func-test"
    - path: "./exe/Main.hs"
      component: "haskell-language-server:exe:haskell-language-server"
    - path: "./exe/Wrapper.hs"
      component: "haskell-language-server:exe:haskell-language-server-wrapper"
    - path: "./src"
      component: "haskell-language-server:lib"
    - path: "./ghcide/src"
      component: "ghcide:lib:ghcide"
    - path: "./ghcide/exe"
      component: "ghcide:exe:ghcide"

Or you can explicitly state the program which should be used to collect the options by supplying the path to the program. It is interpreted relative to the current working directory if it is not an absolute path.

cradle:
  bios:
    program: ".hie-bios"

The complete configuration is a subset of

cradle:
  cabal:
    component: "optional component name"
  stack:
    component: "optional component name"
  bios:
    program: "program to run"
    dependency-program: "optional program to run"
  direct:
    arguments: ["list","of","ghc","arguments"]
  default:
  none:

dependencies:
  - someDep

Editor Integration

Note to editor integrators: there is a haskell-language-server-wrapper executable, which is installed alongside the haskell-language-server executable. When this is invoked in the project root directory, it attempts to work out the GHC version used in the project, and then launch the matching haskell-language-server executable.

All of the editor integrations assume that you have already installed haskell-language-server (see above) and that the installation script put the haskell-language-server and haskell-language-server-wrapper binaries in your PATH (usually ~/.local/bin or ~/.cabal/bin on Linux and macOS, %APPDATA%\local\bin or %APPDATA%\cabal\bin on Windows).

Using Haskell Language Server with VS Code

Install from the VSCode marketplace, or manually from the repository vscode-hie-server. The haskell-language-server and haskell-language-server-wrapper binaries will be automatically downloaded on an ad-hoc basis, but if you have them already installed on your PATH then it will just use them instead.

Using Haskell Language Server with Sublime Text

Install LSP using Package Control
From Sublime Text, go to Preferences and search for LSP Settings
Paste in these settings. Make sure to change the command path to your haskell-language-server-wrapper

{
  "clients": {
    "haskell-language-server": {
      "command": ["haskell-language-server-wrapper", "--lsp"],
      "scopes": ["source.haskell"],
      "syntaxes": ["Packages/Haskell/Haskell.sublime-syntax"],
      "languageId": "haskell",
    },
  },
}

Now open a Haskell project with Sublime Text and enable Language Server in the project. You should have these features available:

Errors are underlined in red
LSP: Show Diagnostics will show a list of hints and errors
LSP: Format Document will prettify the file

Using Haskell Language Server with Vim or Neovim

You can use Coc, LanguageClient-neovim or any other Vim Language server protocol client. Coc is recommend since it is the only complete LSP implementation for Vim and Neovim and offers snippets and floating documentation out of the box.

Coc

Follow Coc's installation instructions. Then issue :CocConfig and add the following to your Coc config file.

"languageserver": {
  "haskell": {
    "command": "haskell-language-server-wrapper",
    "args": ["--lsp"],
    "rootPatterns": [
      "*.cabal",
      "stack.yaml",
      "cabal.project",
      "package.yaml"
    ],
    "filetypes": [
      "hs",
      "lhs",
      "haskell"
    ],
    "initializationOptions": {
      "haskell": {
      }
    }
  }
}

LanguageClient-neovim

vim-plug

If you use vim-plug, then you can do this by e.g., including the following line in the Plug section of your init.vim or ~/.vimrc:

Plug 'autozimu/LanguageClient-neovim', {
    \ 'branch': 'next',
    \ 'do': 'bash install.sh'
    \ }

and issuing a :PlugInstall command within Neovim or Vim.

Clone the LanguageClient-neovim repo

As an alternative to using vim-plug shown above, clone LanguageClient-neovim into ~/.vim/pack/XXX/start/, where XXX is just a name for your "plugin suite".

Sample `~/.vimrc`

set rtp+=~/.vim/pack/XXX/start/LanguageClient-neovim
let g:LanguageClient_serverCommands = { 'haskell': ['haskell-language-server-wrapper', '--lsp'] }

You'll probably want to add some mappings for common commands:

nnoremap <F5> :call LanguageClient_contextMenu()<CR>
map <Leader>lk :call LanguageClient#textDocument_hover()<CR>
map <Leader>lg :call LanguageClient#textDocument_definition()<CR>
map <Leader>lr :call LanguageClient#textDocument_rename()<CR>
map <Leader>lf :call LanguageClient#textDocument_formatting()<CR>
map <Leader>lb :call LanguageClient#textDocument_references()<CR>
map <Leader>la :call LanguageClient#textDocument_codeAction()<CR>
map <Leader>ls :call LanguageClient#textDocument_documentSymbol()<CR>

Use Ctrl+xCtrl+o (<C-x><C-o>) to open up the auto-complete menu, or for asynchronous auto-completion, follow the setup instructions on LanguageClient.

If you'd like diagnostics to be highlighted, add a highlight group for ALEError/ALEWarning/ALEInfo, or customize g:LanguageClient_diagnosticsDisplay:

hi link ALEError Error
hi Warning term=underline cterm=underline ctermfg=Yellow gui=undercurl guisp=Gold
hi link ALEWarning Warning
hi link ALEInfo SpellCap

If you're finding that the server isn't starting at the correct project root, it may also be helpful to also specify root markers:

let g:LanguageClient_rootMarkers = ['*.cabal', 'stack.yaml']

Using Haskell Language Server with Atom

Install the two Atom packages atom-ide-ui and ide-haskell-hie,

$ apm install language-haskell atom-ide-ui ide-haskell-hie

The plugin ide-haskell-hie is designed to work with haskell-ide-engine by default, so you will have to put the path to haskell-language-server-wrapper in the configuration option Absolute path to hie executable.

Using haskell-language-server with Emacs

Install HLS along with the following emacs packages:

lsp-mode lsp-ui lsp-haskell

Make sure to follow the instructions in the README of each of these packages.

(use-package lsp-haskell
 :ensure t
 :config
 (setq lsp-haskell-process-path-hie "haskell-language-server-wrapper")
 ;; Comment/uncomment this line to see interactions between lsp client/server.
 ;;(setq lsp-log-io t)
)

Using haskell-language-server with doom-emacs

Install haskell-language-server, and then enable haskell lang module with lsp flag in .doom.d/init.el

:lang
(haskell +lsp)

in your .doom.d/config.el file

(use-package lsp-haskell
 :ensure t
 :config
 (setq lsp-haskell-process-path-hie "haskell-language-server-wrapper")
 ;; Comment/uncomment this line to see interactions between lsp client/server.
 ;;(setq lsp-log-io t)
)

then do $HOME/.emacs.d/bin/doom refresh

Using haskell-language-server with Kakoune

Grab a copy of kak-lsp, and follow the setup instructions.
Point your kak-lsp.toml to haskell-language-server-wrapper.

[language.haskell]
filetypes = ["haskell"]
roots = ["Setup.hs", "stack.yaml", "*.cabal"]
command = "haskell-language-server-wrapper"
args = ["--lsp"]

Known limitations

Preprocessor

HLS is not yet able to find project preprocessors, which may result in could not execute: <preprocessor> errors. This problem is tracked in haskell#176 and originally comes from haskell/hie-bios#125

As a workaround, you need to ensure the preprocessor is available in the path (install globally with Stack or Cabal, provide in shell.nix, etc.).

Example with tasty-discover:

{-# OPTIONS_GHC -F -pgmF tasty-discover #-}

This returns an error in HLS if 'tasty-discover' is not in the path: could not execute: tasty-discover.

Contributing

It's time to join the project

❤️ Haskell tooling dream is near, we need your help! ❤️

Join our IRC channel at #haskell-ide-engine on freenode.
Fork this repo and hack as much as you can.
Ask @alanz or @hvr to join the project.

Hacking on haskell-language-server

Haskell-language-server can be used on itself. We provide preset samples of hie.yaml for Cabal and Stack.

Note: the ./install/ folder is not directly tied to the project so it has dedicated ./install/hie.yaml.[cbl|stack] templates.

Using Cabal

$ cp hie.yaml.cbl hie.yaml
$ cp install/hie.yaml.cbl install/hie.yaml

Using Stack

Note: Stack project must also be built once until this issue is fixed.

$ cp hie.yaml.stack hie.yaml
$ cp install/hie.yaml.stack install/hie.yaml
$ stack build --test --no-run-tests
$ cd install
$ stack build

sureyeaah/haskell-language-server