/IoT-Based-Automatic-Accident-Detection-And-Rescue-system

self driving car using gyroscope sensor and ultrasonic sensor also detect accident and send realtime alert with google maps location to Users.

Primary LanguageC++

IoT-Based Automatic Accident Detection and Rescue System

This project focuses on developing an IoT-based system to automatically detect vehicular accidents and trigger a rescue response by alerting relevant authorities with the location and details of the accident.

Table of Contents

Introduction

Accidents are a significant concern on roads, and timely rescue can save lives. This IoT-based automatic accident detection and rescue system uses sensors to detect accidents and automatically sends alerts with precise location details to emergency services and contacts.

Features

  • Accident Detection: Utilizes sensors to detect a collision and determine if an accident has occurred.
  • Automatic Alert System: Sends automated alerts to predefined contacts and emergency services with the accident’s location and other relevant details.
  • Real-Time Monitoring: Continuously monitors the vehicle's status and provides real-time updates.
  • Location Tracking: Uses GPS to track the exact location of the accident.

Technologies Used

  • Arduino
  • GPS Module
  • GSM Module
  • Accelerometer/Gyroscope (e.g., MPU-6050)
  • Sensors (e.g., vibration sensor)
  • IoT Platforms (e.g., ThingsBoard, MQTT)
  • Programming Languages: C/C++, Python

Installation

  1. Clone the repository:

    git clone https://github.com/syedissambukhari/IoT-Based-Automatic-Accident-Detection-And-Rescue-system.git

  2. Hardware Setup:

    • Connect the Arduino, GPS module, GSM module, and sensors according to the provided circuit diagram and code.

  3. Software Setup:

    • Install the necessary Arduino libraries for GPS, GSM, and sensors.
    • Open the .ino file in the Arduino IDE.
    • Configure the GSM module with your SIM card details.
    • Upload the code to the Arduino board.

Usage

  1. Configure Contacts:

    • Edit the Arduino code to include the phone numbers or email addresses of emergency contacts.

  2. Deploy the System:

    • Install the system in a vehicle, ensuring all connections are secure and the GPS and GSM modules have a clear signal.

  3. Monitoring and Alerts:

    • The system will automatically detect accidents and send alerts to the configured contacts with location details.

Project Structure

  • Arduino/: Contains the Arduino code (.ino file) and necessary libraries.
  • Diagrams/: Contains circuit diagrams and system architecture images.
  • README.md: Project documentation.

Contributing

Contributions are welcome! Please follow these steps:

  1. Fork the repository.
  2. Create a new branch (git checkout -b feature/your-feature-name).
  3. Commit your changes (git commit -m 'Add some feature').
  4. Push to the branch (git push origin feature/your-feature-name).
  5. Open a pull request.

License

This project is licensed under the MIT License.

Contact

If you have any questions or suggestions, feel free to contact me.