wtflag takes a register description defined in templates/ and a register
value, and will print the status of every flag for the given reg value and the
reg description.
Edit the Makefile, in particular PREFIX to set the install directory, then
type:
$ make install
Not that when changing the PREFIX you should make clean first.
$ wtflag <regname> <hexvalue> [<hexvalue>]
Will pretty-print the register's flags based on the descriptor file and the first hex value. You can pass a second, optional hexvalue to get a diff of flags.
The format is straight-forward, each line should match the following format:
n1[-n2]: <name>
Where n1 is the bit index, the optional n2 preceded by a - is the second
bound of the field if the register's field is multi-bit.
$ wtflag armv8/tcr_el1 0x32b5503510
returns:
RES0 [63-60]:_____________0000
DS [59-59]:_______________0
TCMA1 [58-58]:____________0
TCMA0 [57-57]:____________0
E0PD1 [56-56]:____________0
E0PD0 [55-55]:____________0
NFD1 [54-54]:_____________0
NFD0 [53-53]:_____________0
TBID1 [52-52]:____________0
TBID0 [51-51]:____________0
HWU162 [50-50]:___________0
HWU161 [49-49]:___________0
HWU160 [48-48]:___________0
HWU159 [47-47]:___________0
HWU062 [46-46]:___________0
HWU061 [45-45]:___________0
HWU060 [44-44]:___________0
HWU059 [43-43]:___________0
HPD1 [42-42]:_____________0
HPD0 [41-41]:_____________0
HD [40-40]:_______________0
HA [39-39]:_______________0
TBI1 [38-38]:_____________0
TBI0 [37-37]:_____________1
AS [36-36]:_______________1
IPS [34-32]:______________010
TG1 [31-30]:______________10
SH1 [29-28]:______________11
ORGN1 [27-26]:____________01
IRGN1 [25-24]:____________01
EPD1 [23-23]:_____________0
A1 [22-22]:_______________1
T1SZ [21-16]:_____________010000
TG0 [15-14]:______________00
SH0 [13-12]:______________11
ORGN0 [11-10]:____________01
IRGN0 [9-8]:______________01
EPD0 [7-7]:_______________0
T0SZ [5-0]:_______________010000