syssi/esphome-ant-bms

Issues

• Sensors update at different times

  #99 opened a month ago by rdaguerre
  1

• Add bluetooth support

  #48 opened 2 years ago by v222008
  36

• Disable active BLE scans to save some power and RF pollution

  #96 opened 5 months ago by syssi
  0

• length of value must be at least 8 but the old BMS only 4

  #91 opened 7 months ago by jinkexue
  6

• Invalid response fro BMS

  #90 opened 7 months ago by Rudolf-Ja
  6

• Very old antbms (< 2019) not communicating

  #87 opened 9 months ago by SeByDocKy
  4

• Mention ANT-BLE16ZMUB, 16ZMUB00-220501A, 16ZMB0TB120A as supported

  #81 opened 9 months ago by syssi
  0

• Bluetooth does not connect to ANT BMS

  #84 opened 9 months ago by Deadobiwan
  21

• Interface with ANT 32S 300A - Tested

  #70 opened a year ago by JorgeTorres01
  5

• Modify balancer parameters via home assistant

  #83 opened a year ago by masterx1981
  0

• BLE traffic cannot be decoded because of `invalid frame length`

  #78 opened a year ago by laksa19
  13

• Retrieve and decode system log

  #65 opened 2 years ago by syssi
  3

• Collect BMS responses

  #1 opened 3 years ago by syssi
  81

• CONF_SOC

  #74 opened a year ago by Oleg-Sob
  3

• Increase `accuracy_decimals` of the average cell voltage sensor

  #72 opened a year ago by Oleg-Sob
  2

• Use device class battery

  #71 opened a year ago by syssi
  0

• Read config settings

  #18 opened 3 years ago by syssi
  38

• Retrieve the status frame of the new protocol version

  #49 opened 2 years ago by syssi
  0

• Convert UART component (new protocol) to 16bit addresses

  #53 opened 2 years ago by syssi
  0

• How to factory reset a ANT-BMS?

  #42 opened 2 years ago by Stealthbomber76
  2

• Serial traffic analysis: BMS version 2021 protocol (`0x7E A1 ... 0xAA 0x55`)

  #20 opened 2 years ago by syssi
  2

• ANT-BMS doesn't respond to requests

  #68 opened 2 years ago by furang
  27

• Problem with update

  #67 opened 2 years ago by lumiror
  12

• Add bluetooth support for the old protocol

  #61 opened 2 years ago by oguzatagan
  67

• Introduce delta cell voltage sensor

  #64 opened 2 years ago by syssi
  0

• Add buttons to control open-loop BMS version 2021 features

  #29 opened 3 years ago by syssi
  0

• Introduce new sensors to expose additional states of the new status frame

  #55 opened 2 years ago by syssi
  0

• Using entity from ANT BMS to control PWM signal ESP32

  #46 opened 2 years ago by lumiror
  93

• Add documentation for the BLE component

  #54 opened 2 years ago by syssi
  0

• Ant BMS connection to Goodwe inverter.

  #45 opened 2 years ago by Rainha1978
  4

• Bootloop if the number of sensors exceeds the stack size of an ESP32

  #36 opened 3 years ago by lumiror
  35

• Ant BMS 2021+ PC software

  #44 opened 2 years ago by bchiu
  3

• Power Sensor 2021 BMS

  #37 opened 3 years ago by lucasimons
  16

• Identify/verify the connector type

  #40 opened 3 years ago by syssi
  3

• How to connect an old ANT-BMS

  #34 opened 3 years ago by rdaguerre
  10

• Control the BMS version pre 2021 (2020)

  #28 opened 3 years ago by syssi
  30

• Reject dubious BMS responses

  #35 opened 3 years ago by syssi
  8

• Stability issue

  #33 opened 3 years ago by lucasimons
  21

• Add missing sensors

  #15 opened 3 years ago by syssi
  17

• Simplify schemas

  #8 opened 3 years ago by syssi
  0

• Test 2020 version

  #31 opened 3 years ago by lucasimons
  2

• Control the BMS version 2021

  #5 opened 3 years ago by syssi
  56

• Serial traffic analysis antBMS_Android_English.apk

  #22 opened 3 years ago by syssi
  0

• Add buttons instead of switches

  #16 opened 3 years ago by syssi
  1

• Clarify schematics and connector type

  #9 opened 3 years ago by syssi
  2

• Reverse engineer CRC of the status response

  #4 opened 3 years ago by syssi
  0