syssi/esphome-jk-bms

Issues

• Stability - ESP frequently restarts several times a day

  #622 opened 24 days ago by peff74
  57

• Help with MQTT publishing from node-red via Mosquito

  #619 opened a month ago by Phil-b-l
  9

• New `JK-B2A8S20P HW: V11A SW: V11.54` not working from `GPS UART-TTL` port

  #629 opened 6 days ago by Sleeper85
  9

• Component jk_modbus took a long time for an operation

  #623 opened 22 days ago by fastvd
  7

• NEEY balancer connetivity via Blutetooth proxy..

  #628 opened 8 days ago by jeybee74
  3

• JK-BMS UART Missing Functions

  #625 opened 11 days ago by piknew
  1

• Parallel comms lost when polling master BMS

  #599 opened 2 months ago by moto501
  9

• Extend the modbus example

  #615 opened a month ago by manuelmarin1967
  2

• Update to HA 2024.10.4 - update of SOME values is not working

  #621 opened 25 days ago by piknew
  12

• JK PB2A16S20P v15a fw15.29 issues with some values

  #613 opened a month ago by Ghilm1986
  11

• Handling of NaN state in MQTT component

  #596 opened 2 months ago by FireFly3390
  0

• One BMS going off after some time.

  #608 opened a month ago by LifeofDan-EL
  7

• NEEY 10A disconnection/irregular data flow

  #569 opened 3 months ago by utasek
  3

• give error when compile

  #598 opened a month ago by oguzatagan
  5

• manual update external plugin, why doesn't the automatic update

  #600 opened a month ago by mirasu
  2

• JK-B2A20S20P HW V11.XA SW V11.51 is supporting?

  #607 opened a month ago by petervpn18
  3

• Duplicate key "wifi_ssid"

  #617 opened a month ago by italodl
  2

• Display protocol doesn't return cell voltages data

  #611 opened a month ago by bearpawmaxim
  3

• Current calibration field always same value

  #604 opened 2 months ago by mevlutsenol
  5

• Sending JK BMS PB-x firmware update command via BLE

  #585 opened 2 months ago by tarek-zy
  2

• ESP8266 Balancer switch and Cell resistance support

  #602 opened 2 months ago by VahaC
  1

• Fake battery / soc manipulation for sofar inverter charge

  #601 opened 2 months ago by git-greatguy
  3

• Warnings when compiling

  #593 opened 2 months ago by gyrex
  1

• JK B2A24S20P voltage error and JK02 option missing

  #591 opened 3 months ago by Ghilm1986
  2

• JK-B2A8S20P HW V11.XA SW V11.48 is supporting?

  #588 opened 3 months ago by BytEvil
  4

• Bluetooth PIN support

  #589 opened 3 months ago by HansWegman
  5

• Add Inverter CAN Support

  #586 opened 3 months ago by JohnGalt1717
  3

• Sensor readings constantly do not match

  #581 opened 3 months ago by man55
  10

• Introduce `friendly_name` to polish MQTT topics

  #580 opened 3 months ago by syssi
  0

• Rename balacing into balancer status

  #579 opened 3 months ago by syssi
  0

• Setting max discharge current

  #577 opened 3 months ago by seant100
  1

• Make settings export as easy as possible

  #550 opened 4 months ago by holle75
  2

• @txubelaxu Hi! I'm trying to understand your project and if I understood correctly, you connect the inverter to the battery via rs485 via CAN bus and simultaneously receive data from the inverter also via rs485 or is it not quite like that?

  #564 opened 3 months ago by txubelaxu
  8

• How to implement the BLE communication from scratch using Arduino

  #562 opened 3 months ago by tssparky
  16

• Rename errors bitmask into protection bitmask and cover all possible alarms

  #567 opened 3 months ago by syssi
  0

• currently flashing an esp8266 module no longer works.

  #557 opened 3 months ago by duymelody9x
  8

• UART Discharging switch not working ( B2A20S20P HW: V11.XW - SW: V11.285H )

  #559 opened 4 months ago by Sleeper85
  9

• 2 BMS CONNECTION PROBLEM

  #560 opened 4 months ago by jouking
  16

• JK-PB2A16S20P: constant heating on/off switching

  #552 opened 4 months ago by dmode9000
  7

• Make "RCV Time" and "RFV Time" controllable

  #548 opened 4 months ago by dmode9000
  8

• Read out two Neey balancers?

  #545 opened 4 months ago by mathschut
  5

• Soc 0 / Soc 100 limits in dashboard settings

  #544 opened 4 months ago by holle75
  2

• JK-PB2A16S20P: Incorrect SOC100% Voltage Range 0.003 - 1.0 Instead of 3.x - 3.65

  #540 opened 4 months ago by dmode9000
  2

• JK-BD6A20S6P doesn't respond (ESP8266, UARTL-TTL)

  #537 opened 4 months ago by parumsancto
  18

• skip_updates

  #539 opened 4 months ago by hemskgren
  1

• Inverter BMS battery capacity not reporting correctly

  #535 opened 4 months ago by iamvlanone
  8

• Make cell resistance sensors available for UART-TTL connections (esp8622)

  #536 opened 4 months ago by Co2u
  1

• [Question] How to generate JK-B* V11 UART fake bms ?

  #534 opened 4 months ago by Sleeper85
  5

• Integration deye and jk BMS

  #532 opened 4 months ago by sarzyk
  3

• JKPBXA16SXXP: "switch" settings when restart

  #531 opened 4 months ago by holle75
  7