syssi/esphome-pace-bms

Issues

• Does it work without flow control pin?

  #58 opened 2 months ago by Wiki591
  3

• P16S100A-21440-2.03 stops communicating

  #57 opened 3 months ago by gptech2444
  0

• How to use a LilyGO T-CAN485

  #54 opened 4 months ago by tumbochka
  26

• Help for P16S100A, looks like PACE

  #19 opened 8 months ago by Maikeleg
  32

• Got my hands on a Revov R100 running pace bms p16s100a-12720-4.05G

  #39 opened 5 months ago by JacquesdeBruyn
  36

• Help installing

  #34 opened 6 months ago by jacocilliers
  18

• Example to not boot - maybe a beginner issue

  #26 opened 6 months ago by Dome89
  8

• SOK 100ah 48v

  #35 opened 6 months ago by garylankford8
  7

• P16S100A with RS232

  #32 opened 7 months ago by WallK
  13

• Pace via RS232 - works with seplos but not with this one

  #27 opened 8 months ago by tumbochka
  10

• Add capacity settings (remaining, full, design capacity) as number entities

  #28 opened 10 months ago by aviatorhh
  1

• Configuration does not work for Delong batteries

  #16 opened 8 months ago by Algram
  3

• Wrong Bitmask for status charging and discharging

  #20 opened 8 months ago by ThHanika
  3

• Can't enable RS485

  #25 opened 8 months ago by clydebarrow
  7

• Works with Meritsun

  #29 opened 10 months ago by m1k3f15h
  2

• Help for Titansolar with P16S100A-21037-3.00T

  #23 opened a year ago by yutani42
  9

• PACE BMS P16S200A

  #17 opened a year ago by MattBN001
  5

• Verify Gobel Power RN150 support

  #8 opened a year ago by syssi
  33

• Add PACE BMS support

  #1 opened a year ago by JacquesdeBruyn
  111

• Decode bitmasks

  #3 opened a year ago by syssi
  0

• Expose status bits as binary sensors

  #4 opened a year ago by syssi
  0

• Add a helper YAML configuration to change the RS485 protocol setting

  #7 opened a year ago by syssi
  0

• Add min/max, delta and average cell voltage sensors

  #2 opened a year ago by syssi
  0