no power value for virtualmeter
Closed this issue · 2 comments
i have installed the esp8266-display-display-version-limiter-example.yaml on an esp8266 and connected it to the rs485 and display port.
the display port functions are ok, but why do it not see a value for sensor.soyodisplay_soyosource_gtn_display_power_demand?
i have set the right sensor in the yaml file and i am using the api.
the binary_sensor.soyodisplay_soyosource_gtn_display_limiter_connected is on.
this is what i see in the esphome logs:
[22:28:58][I][soyosource_display:235]: Status frame (Soyo, 15 bytes) received
[22:28:58][I][soyosource_display:386]: Settings (Soyo, 15 bytes):
[22:28:58][I][soyosource_display:399]: Operation mode setting: 16 (0x10)
[22:28:58][I][soyosource_display:412]: Device model: 1000 W (210)
[22:28:58][I][soyosource_display:415]: Device type: PV 26-56V / BAT 24V (24)
[22:28:58][I][soyosource_display:419]: Start voltage: 25 V
[22:28:58][I][soyosource_display:425]: Shutdown voltage: 23 V
[22:28:58][I][soyosource_display:439]: Output power limit: 50 W
[22:28:58][I][soyosource_display:445]: Start delay: 6 s
i have attached my esphome config
soyodisplay.txt
an other problem is that there is always the error "DC Voltage tom low" but i have a shutdown voltage of 23V and startup voltage of 25V and my battery is full loaded with 28.8V
i have changed the sensor for reporting the output demand and now it is working
Good job!