syssi/esphome-soyosource-gtn-virtual-meter
ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
C++Apache-2.0
Issues
- 4
Inverter correctly doing zero export, but no information returned from inverter
#188 opened by tomasro - 60
Determining the "Power calculation method"
#73 opened by careyer - 3
Invalid header: 0x40 0x20 0xC0 0xC
#151 opened by WZBFL - 1
- 7
Inverter for 36v battery
#165 opened by marine1988 - 1
use power demand value from mqtt with json format
#164 opened by card917 - 5
Improve the precision of the `binary_sensor.fan_running` depend of the temperature
#172 opened by Chickenbreast0 - 7
PV mode not working
#185 opened by snkbrz - 9
Power Output von Display Version nicht korrekt
#184 opened by Asathor85 - 15
Prevent overshooting (esp32 go down)?
#182 opened by Giro-S - 3
Readout of Shelly 3 EM broken with update of ESPHome to 2024.6 & tentative solution
#177 opened by fploen - 5
- 9
Sending commands via RS485 fails
#148 opened by janrothkegel - 7
Defekt am Soyo?
#171 opened by pogo01 - 3
Slow power meter workaround
#173 opened by cpiga - 27
Which version I must install?
#175 opened by Giro-S - 8
The inverter didn't respond to the last 15 status
#149 opened by WZBFL - 71
- 9
Sorry but a little bit confused...
#161 opened by ericgrand - 9
Using without RS485 board
#159 opened by poky - 8
- 0
close this
#158 opened by eikaf - 2
no power value for virtualmeter
#153 opened by wasn-eu - 7
Buffer is needed, but not working?
#146 opened by odroegehorn - 15
Tasmota electricity consumption meter?
#142 opened by thommy6102 - 27
- 13
Dynamic power control over display/wifi interface
#141 opened by mb-software - 8
Soyosource not responding
#136 opened by janrothkegel - 10
Multiple soyosource inverters
#135 opened by ingoooooo - 19
Use with Shelly 3EM MQTT?
#76 opened by teunito - 4
- 12
Wifi Dongle: SoyosourceDisplay CRC Check failed!
#105 opened by blacklopo - 27
Help setting things up needed
#109 opened by humpataa - 10
- 2
PIP inverters
#68 opened by ingoooooo - 57
Soyosource doesn't respond on RS485 connection
#81 opened by dowermyr - 5
- 7
Mulitple inverters on the same RS485 bus
#86 opened by DL6ER - 3
Add reboot command as button entity
#85 opened by blacklopo - 9
Value of produced Power is not exported
#82 opened by blacklopo - 5
- 2
Installation
#75 opened by dowermyr - 9
MQTT Update interval
#72 opened by careyer - 13
MQTT documentation
#71 opened by careyer - 15
Unable to compile "esp8266-display-example.yaml"
#69 opened by senfkorn - 0
Query the settings less frequently
#61 opened by syssi - 0
- 1
- 0
Add select entity to change the operation mode
#53 opened by syssi - 1
Add number entities for some settings
#52 opened by syssi