This is a multi-threaded multi-pool FPGA and ASIC miner for bitcoin. This code is provided entirely free of charge by the programmer in his spare time so donations would be greatly appreciated. Please consider donating to the address below. Con Kolivas <kernel@kolivas.org> 15qSxP1SQcUX3o4nhkfdbgyoWEFMomJ4rZ DOWNLOADS: http://ck.kolivas.org/apps/cgminer GIT TREE: https://github.com/ckolivas/cgminer Support thread: http://bitcointalk.org/index.php?topic=28402.0 IRC Channel: irc://irc.freenode.net/cgminer License: GPLv3. See COPYING for details. SEE ALSO API-README, ASIC-README and FGPA-README FOR MORE INFORMATION ON EACH. --- EXECUTIVE SUMMARY ON USAGE: Single pool: cgminer -o http://pool:port -u username -p password Multiple pools: cgminer -o http://pool1:port -u pool1username -p pool1password -o http://pool2:port -u pool2usernmae -p pool2password Single pool with a standard http proxy: cgminer -o "http:proxy:port|http://pool:port" -u username -p password Single pool with a socks5 proxy: cgminer -o "socks5:proxy:port|http://pool:port" -u username -p password Single pool with stratum protocol support: cgminer -o stratum+tcp://pool:port -u username -p password The list of proxy types are: http: standard http 1.1 proxy http0: http 1.0 proxy socks4: socks4 proxy socks5: socks5 proxy socks4a: socks4a proxy socks5h: socks5 proxy using a hostname If you compile cgminer with a version of CURL before 7.19.4 then some of the above will not be available. All are available since CURL version 7.19.4 If you specify the --socks-proxy option to cgminer, it will only be applied to all pools that don't specify their own proxy setting like above After saving configuration from the menu, you do not need to give cgminer any arguments and it will load your configuration. Any configuration file may also contain a single "include" : "filename" to recursively include another configuration file. Writing the configuration will save all settings from all files in the output. --- BUILDING CGMINER FOR YOURSELF DEPENDENCIES: Mandatory: pkg-config http://www.freedesktop.org/wiki/Software/pkg-config libtool http://www.gnu.org/software/libtool/ Optional: curl dev library http://curl.haxx.se/libcurl/ (libcurl4-openssl-dev - Must tell configure --disable-libcurl otherwise it will attempt to compile it in) curses dev library (libncurses5-dev or libpdcurses on WIN32 for text user interface) libudev dev library (libudev-dev) (This is only required for USB device support and is linux only) If building from git: autoconf automake If building on Red Hat: sudo yum install autoconf automake autoreconf libtool openssl-compat-bitcoin-devel.x86_64 \ curl libcurl libcurl-devel openssh CGMiner specific configuration options: --enable-avalon Compile support for Avalon (default disabled) --enable-bflsc Compile support for BFL ASICs (default disabled) --enable-bitforce Compile support for BitForce FPGAs (default disabled) --enable-bitfury Compile support for BitFury ASICs (default disabled) --enable-hashfast Compile support for Hashfast (default disabled) --enable-icarus Compile support for Icarus (default disabled) --enable-knc Compile support for KnC miners (default disabled) --enable-bab Compile support for BlackArrow Bitfury (default disabled) --enable-klondike Compile support for Klondike (default disabled) --enable-modminer Compile support for ModMiner FPGAs(default disabled) --without-curses Compile support for curses TUI (default enabled) --with-system-libusb Compile against dynamic system libusb (default use included static libusb) Basic *nix build instructions: To actually build: ./autogen.sh # only needed if building from git repo CFLAGS="-O2 -Wall -march=native" ./configure <options> make No installation is necessary. You may run cgminer from the build directory directly, but you may do make install if you wish to install cgminer to a system location or location you specified. Native WIN32 build instructions: see windows-build.txt --- Usage instructions: Run "cgminer --help" to see options: Usage: cgminer [-DdElmpPQqUsTouOchnV] Options for both config file and command line: --api-allow Allow API access (if enabled) only to the given list of [W:]IP[/Prefix] address[/subnets] This overrides --api-network and you must specify 127.0.0.1 if it is required W: in front of the IP address gives that address privileged access to all api commands --api-description Description placed in the API status header (default: cgminer version) --api-groups API one letter groups G:cmd:cmd[,P:cmd:*...] See API-README for usage --api-listen Listen for API requests (default: disabled) By default any command that does not just display data returns access denied See --api-allow to overcome this --api-network Allow API (if enabled) to listen on/for any address (default: only 127.0.0.1) --api-mcast Enable API Multicast listener, (default: disabled) The listener will only run if the API is also enabled --api-mcast-addr <arg> API Multicast listen address, (default: 224.0.0.75) --api-mcast-code <arg> Code expected in the API Multicast message, don't use '-' (default: "FTW") --api-mcast-port <arg> API Multicast listen port, (default: 4028) --api-port Port number of miner API (default: 4028) --balance Change multipool strategy from failover to even share balance --benchmark Run cgminer in benchmark mode - produces no shares --compact Use compact display without per device statistics --debug|-D Enable debug output --device|-d <arg> Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all --disable-rejecting Automatically disable pools that continually reject shares --expiry|-E <arg> Upper bound on how many seconds after getting work we consider a share from it stale (default: 120) --failover-only Don't leak work to backup pools when primary pool is lagging --fix-protocol Do not redirect to a different getwork protocol (eg. stratum) --hotplug <arg> Set hotplug check time to <arg> seconds (0=never default: 5) - only with libusb --kernel-path|-K <arg> Specify a path to where bitstream files are (default: "/usr/local/bin") --load-balance Change multipool strategy from failover to quota based balance --log|-l <arg> Interval in seconds between log output (default: 5) --lowmem Minimise caching of shares for low memory applications --monitor|-m <arg> Use custom pipe cmd for output messages --net-delay Impose small delays in networking to not overload slow routers --no-submit-stale Don't submit shares if they are detected as stale --pass|-p <arg> Password for bitcoin JSON-RPC server --per-device-stats Force verbose mode and output per-device statistics --protocol-dump|-P Verbose dump of protocol-level activities --queue|-Q <arg> Minimum number of work items to have queued (0 - 10) (default: 1) --quiet|-q Disable logging output, display status and errors --real-quiet Disable all output --remove-disabled Remove disabled devices entirely, as if they didn't exist --rotate <arg> Change multipool strategy from failover to regularly rotate at N minutes (default: 0) --round-robin Change multipool strategy from failover to round robin on failure --scan-time|-s <arg> Upper bound on time spent scanning current work, in seconds (default: 60) --sched-start <arg> Set a time of day in HH:MM to start mining (a once off without a stop time) --sched-stop <arg> Set a time of day in HH:MM to stop mining (will quit without a start time) --sharelog <arg> Append share log to file --shares <arg> Quit after mining N shares (default: unlimited) --socks-proxy <arg> Set socks4 proxy (host:port) for all pools without a proxy specified --syslog Use system log for output messages (default: standard error) --temp-cutoff <arg> Temperature where a device will be automatically disabled, one value or comma separated list (default: 95) --text-only|-T Disable ncurses formatted screen output --url|-o <arg> URL for bitcoin JSON-RPC server --user|-u <arg> Username for bitcoin JSON-RPC server --verbose Log verbose output to stderr as well as status output --userpass|-O <arg> Username:Password pair for bitcoin JSON-RPC server Options for command line only: --config|-c <arg> Load a JSON-format configuration file See example.conf for an example configuration. --help|-h Print this message --version|-V Display version and exit USB device (ASIC and FPGA) options: --icarus-options <arg> Set specific FPGA board configurations - one set of values for all or comma separated --icarus-timing <arg> Set how the Icarus timing is calculated - one setting/value for all or comma separated --usb <arg> USB device selection (See below) --usb-dump (See FPGA-README) See FGPA-README or ASIC-README for more information regarding these. ASIC only options: --avalon-auto Adjust avalon overclock frequency dynamically for best hashrate --avalon-fan <arg> Set fanspeed percentage for avalon, single value or range (default: 20-100) --avalon-freq <arg> Set frequency range for avalon-auto, single value or range --avalon-cutoff <arg> Set avalon overheat cut off temperature (default: 60) --avalon-options <arg> Set avalon options baud:miners:asic:timeout:freq:tech --avalon-temp <arg> Set avalon target temperature (default: 50) --bflsc-overheat <arg> Set overheat temperature where BFLSC devices throttle, 0 to disable (default: 90) --bitburner-fury-options <arg> Override avalon-options for BitBurner Fury boards baud:miners:asic:timeout:freq --bitburner-fury-voltage <arg> Set BitBurner Fury core voltage, in millivolts --bitburner-voltage <arg> Set BitBurner (Avalon) core voltage, in millivolts --drillbit-options <arg> Set drillbit options <int|ext>:clock[:clock_divider][:voltage] --klondike-options <arg> Set klondike options clock:temptarget See ASIC-README for more information regarding these. FPGA only options: --bfl-range Use nonce range on bitforce devices if supported See FGPA-README for more information regarding this. Cgminer should automatically find all of your Avalon ASIC, BFL ASIC, BitForce FPGAs, Icarus bitstream FPGAs, Klondike ASIC, ASICMINER usb block erupters, KnC ASICs, BaB ASICs, Hashfast ASICs, ModMiner FPGAs, BPMC/BGMC BF1 USB ASICs and Bi*fury USB ASICs. --- SETTING UP USB DEVICES WINDOWS: On windows, the direct USB support requires the installation of a WinUSB driver (NOT the ftdi_sio driver), and attach it to the chosen USB device. When configuring your device, plug it in and wait for windows to attempt to install a driver on its own. It may think it has succeeded or failed but wait for it to finish regardless. This is NOT the driver you want installed. At this point you need to associate your device with the WinUSB driver. The easiest way to do this is to use the zadig utility which you must right click on and run as administrator. Then once you plug in your device you can choose the "list all devices" from the "option" menu and you should be able to see the device as something like: "BitFORCE SHA256 SC". Choose the install or replace driver option and select WinUSB. You can either google for zadig or download it from the cgminer directory in the DOWNLOADS link above. When you first switch a device over to WinUSB with zadig and it shows that correctly on the left of the zadig window, but it still gives permission errors, you may need to unplug the USB miner and then plug it back in. Some users may need to reboot at this point. LINUX: On linux, the direct USB support requires no drivers at all. However due to permissions issues, you may not be able to mine directly on the devices as a regular user without giving the user access to the device or by mining as root (administrator). In order to give your regular user access, you can make him a member of the plugdev group with the following commands: sudo usermod -G plugdev -a `whoami` If your distribution does not have the plugdev group you can create it with: sudo groupadd plugdev In order for the BFL devices to instantly be owned by the plugdev group and accessible by anyone from the plugdev group you can copy the file "01-cgminer.rules" from the cgminer archive into the /etc/udev/rules.d directory with the following command: sudo cp 01-cgminer.rules /etc/udev/rules.d/ After this you can either manually restart udev and re-login, or more easily just reboot. OSX: On OSX, like Linux, no drivers need to be installed. However some devices like the bitfury USB sticks automatically load a driver thinking they're a modem and the driver needs to be unloaded for cgminer to work: sudo kextunload -b com.apple.driver.AppleUSBCDC sudo kextunload -b com.apple.driver.AppleUSBCDCACMData --- Advanced USB options: The --usb option can restrict how many Avalon, BFL ASIC, BitForce FPGAs, Klondike ASIC, ModMiner FPGAs or Icarus bitstream FPGAs it finds: --usb 1:2,1:3,1:4,1:* or --usb BAS:1,BFL:1,MMQ:0,ICA:0,KLN:0 or --usb :10 You can only use one of the above 3 The first version --usb 1:2,1:3,1:4,1:* allows you to select which devices to mine on with a list of USB bus_number:device_address All other USB devices will be ignored Hotplug will also only look at the devices matching the list specified and find nothing new if they are all in use You can specify just the USB bus_number to find all devices like 1:* which means any devices on USB bus_number 1 This is useful if you unplug a device then plug it back in the same port, it usually reappears with the same bus_number but a different device_address You can see the list of all USB devices on linux with 'sudo lsusb' Cgminer will list the recognised USB devices with the '-n' option or the '--usb-dump 0' option The '--usb-dump N' option with a value of N greater than 0 will dump a lot of details about each recognised USB device If you wish to see all USB devices, include the --usb-list-all option The second version --usb BAS:1,BFL:1,MMQ:0,ICA:0,KLN:0 allows you to specify how many devices to choose based on each device driver cgminer has - there are currently 5 USB drivers: BAS, BFL, MMQ. ICA & KLN N.B. you can only specify which device driver to limit, not the type of each device, e.g. with BAS:n you can limit how many BFL ASIC devices will be checked, but you cannot limit the number of each type of BFL ASIC Also note that the MMQ count is the number of MMQ backplanes you have not the number of MMQ FPGAs The third version --usb :10 means only use a maximum of 10 devices of any supported USB devices Once cgminer has 10 devices it will not configure any more and hotplug will not scan for any more If one of the 10 devices stops working, hotplug - if enabled, as is default - will scan normally again until it has 10 devices --usb :0 will disable all USB I/O other than to initialise libusb NOTE: The --device option will limit which devices are in use based on their numbering order of the total devices, so if you hotplug USB devices regularly, it will not reliably be the same devices. --- WHILE RUNNING: The following options are available while running with a single keypress: [P]ool management [S]ettings [D]isplay options [Q]uit P gives you: Current pool management strategy: Failover [F]ailover only disabled [A]dd pool [R]emove pool [D]isable pool [E]nable pool [C]hange management strategy [S]witch pool [I]nformation S gives you: [Q]ueue: 1 [S]cantime: 60 [E]xpiry: 120 [W]rite config file [C]gminer restart D gives you: [N]ormal [C]lear [S]ilent mode (disable all output) [D]ebug:off [P]er-device:off [Q]uiet:off [V]erbose:off [R]PC debug:off [W]orkTime details:off co[M]pact: off [L]og interval:5 Q quits the application. The running log shows output like this: [2013-11-09 11:04:41] Accepted 01b3bde7 Diff 150/128 AVA 1 pool 0 [2013-11-09 11:04:49] Accepted 015df995 Diff 187/128 AVA 1 pool 0 [2013-11-09 11:04:50] Accepted 01163b68 Diff 236/128 AVA 1 pool 0 [2013-11-09 11:04:53] Accepted 9f745840 Diff 411/128 BAS 1 pool 0 The 8 byte hex value are the 1st nonzero bytes of the share being submitted to the pool. The 2 diff values are the actual difficulty target that share reached followed by the difficulty target the pool is currently asking for. --- Also many issues and FAQs are covered in the forum thread dedicated to this program, http://forum.bitcoin.org/index.php?topic=28402.0 The output line shows the following: (5s):1713.6 (avg):1707.8 Mh/s | A:729 R:8 HW:0 WU:22.53/m Each column is as follows: 5s: A 5 second exponentially decaying average hash rate avg: An all time average hash rate A: The total difficulty of Accepted shares R: The total difficulty of Rejected shares HW: The number of HardWare errors WU: The Work Utility defined as the number of diff1 shares work / minute (accepted or rejected). BAS 1: max 67C 3.27V | 62.29G/62.19Gh/s | A:140813 R:256 HW:2860 WU: 852.0/m Each column is as follows: Temperature (if supported) Fanspeed (if supported) A 5 second exponentially decaying average hash rate An all time average hash rate The total difficulty of accepted shares The total difficulty of rejected shares The number of hardware erorrs The work utility defined as the number of diff1 shares work / minute The cgminer status line shows: ST: 1 SS: 0 NB: 1 LW: 8 GF: 1 RF: 1 ST is STaged work items (ready to use). SS is Stale Shares discarded (detected and not submitted so don't count as rejects) NB is New Blocks detected on the network LW is Locally generated Work items GF is Getwork Fail Occasions (server slow to provide work) RF is Remote Fail occasions (server slow to accept work) The block display shows: Block: 0074c5e482e34a506d2a051a... Started: [17:17:22] Best share: 2.71K This shows a short stretch of the current block, when the new block started, and the all time best difficulty share you've found since starting cgminer this time. --- MULTIPOOL FAILOVER STRATEGIES WITH MULTIPOOL: A number of different strategies for dealing with multipool setups are available. Each has their advantages and disadvantages so multiple strategies are available by user choice, as per the following list: FAILOVER: The default strategy is failover. This means that if you input a number of pools, it will try to use them as a priority list, moving away from the 1st to the 2nd, 2nd to 3rd and so on. If any of the earlier pools recover, it will move back to the higher priority ones. ROUND ROBIN: This strategy only moves from one pool to the next when the current one falls idle and makes no attempt to move otherwise. ROTATE: This strategy moves at user-defined intervals from one active pool to the next, skipping pools that are idle. LOAD BALANCE: This strategy sends work to all the pools on a quota basis. By default, all pools are allocated equal quotas unless specified with --quota. This apportioning of work is based on work handed out, not shares returned so is independent of difficulty targets or rejected shares. While a pool is disabled or dead, its quota is dropped until it is re-enabled. Quotas are forward looking, so if the quota is changed on the fly, it only affects future work. If all pools are set to zero quota or all pools with quota are dead, it will fall back to a failover mode. See quota below for more information. The failover-only flag has special meaning in combination with load-balance mode and it will distribute quota back to priority pool 0 from any pools that are unable to provide work for any reason so as to maintain quota ratios between the rest of the pools. BALANCE: This strategy monitors the amount of difficulty 1 shares solved for each pool and uses it to try to end up doing the same amount of work for all pools. --- QUOTAS The load-balance multipool strategy works off a quota based scheduler. The quotas handed out by default are equal, but the user is allowed to specify any arbitrary ratio of quotas. For example, if all the quota values add up to 100, each quota value will be a percentage, but if 2 pools are specified and pool0 is given a quota of 1 and pool1 is given a quota of 9, pool0 will get 10% of the work and pool1 will get 90%. Quotas can be changed on the fly by the API, and do not act retrospectively. Setting a quota to zero will effectively disable that pool unless all other pools are disabled or dead. In that scenario, load-balance falls back to regular failover priority-based strategy. While a pool is dead, it loses its quota and no attempt is made to catch up when it comes back to life. To specify quotas on the command line, pools should be specified with a semicolon separated --quota(or -U) entry instead of --url. Pools specified with --url are given a nominal quota value of 1 and entries can be mixed. For example: --url poola:porta -u usernamea -p passa --quota "2;poolb:portb" -u usernameb -p passb Will give poola 1/3 of the work and poolb 2/3 of the work. Writing configuration files with quotas is likewise supported. To use the above quotas in a configuration file they would be specified thus: "pools" : [ { "url" : "poola:porta", "user" : "usernamea", "pass" : "passa" }, { "quota" : "2;poolb:portb", "user" : "usernameb", "pass" : "passb" } ] --- LOGGING cgminer will log to stderr if it detects stderr is being redirected to a file. To enable logging simply add 2>logfile.txt to your command line and logfile.txt will contain the logged output at the log level you specify (normal, verbose, debug etc.) In other words if you would normally use: ./cgminer -o xxx -u yyy -p zzz if you use ./cgminer -o xxx -u yyy -p zzz 2>logfile.txt it will log to a file called logfile.txt and otherwise work the same. There is also the -m option on linux which will spawn a command of your choice and pipe the output directly to that command. The WorkTime details 'debug' option adds details on the end of each line displayed for Accepted or Rejected work done. An example would be: <-00000059.ed4834a3 M:X D:1.0 G:17:02:38:0.405 C:1.855 (2.995) W:3.440 (0.000) S:0.461 R:17:02:47 The first 2 hex codes are the previous block hash, the rest are reported in seconds unless stated otherwise: The previous hash is followed by the getwork mode used M:X where X is one of P:Pool, T:Test Pool, L:LP or B:Benchmark, then D:d.ddd is the difficulty required to get a share from the work, then G:hh:mm:ss:n.nnn, which is when the getwork or LP was sent to the pool and the n.nnn is how long it took to reply, followed by 'O' on it's own if it is an original getwork, or 'C:n.nnn' if it was a clone with n.nnn stating how long after the work was recieved that it was cloned, (m.mmm) is how long from when the original work was received until work started, W:n.nnn is how long the work took to process until it was ready to submit, (m.mmm) is how long from ready to submit to actually doing the submit, this is usually 0.000 unless there was a problem with submitting the work, S:n.nnn is how long it took to submit the completed work and await the reply, R:hh:mm:ss is the actual time the work submit reply was received If you start cgminer with the --sharelog option, you can get detailed information for each share found. The argument to the option may be "-" for standard output (not advisable with the ncurses UI), any valid positive number for that file descriptor, or a filename. To log share data to a file named "share.log", you can use either: ./cgminer --sharelog 50 -o xxx -u yyy -p zzz 50>share.log ./cgminer --sharelog share.log -o xxx -u yyy -p zzz For every share found, data will be logged in a CSV (Comma Separated Value) format: timestamp,disposition,target,pool,dev,thr,sharehash,sharedata For example (this is wrapped, but it's all on one line for real): 1335313090,reject, ffffffffffffffffffffffffffffffffffffffffffffffffffffffff00000000, http://localhost:8337,GPU0,0, 6f983c918f3299b58febf95ec4d0c7094ed634bc13754553ec34fc3800000000, 00000001a0980aff4ce4a96d53f4b89a2d5f0e765c978640fe24372a000001c5 000000004a4366808f81d44f26df3d69d7dc4b3473385930462d9ab707b50498 f681634a4f1f63d01a0cd43fb338000000000080000000000000000000000000 0000000000000000000000000000000000000000000000000000000080020000 --- RPC API For RPC API details see the API-README file --- FAQ Q: Can I mine on servers from different networks (eg xxxcoin and bitcoin) at the same time? A: No, cgminer keeps a database of the block it's working on to ensure it does not work on stale blocks, and having different blocks from two networks would make it invalidate the work from each other. Q: Can I configure cgminer to mine with different login credentials or pools for each separate device? A: No. Q: Can I put multiple pools in the config file? A: Yes, check the example.conf file. Alternatively, set up everything either on the command line or via the menu after startup and choose settings->write config file and the file will be loaded one each startup. Q: The build fails with gcc is unable to build a binary. A: Remove the "-march=native" component of your CFLAGS as your version of gcc does not support it. Q: Can you implement feature X? A: I can, but time is limited, and people who donate are more likely to get their feature requests implemented. Q: Work keeps going to my backup pool even though my primary pool hasn't failed? A: Cgminer checks for conditions where the primary pool is lagging and will pass some work to the backup servers under those conditions. The reason for doing this is to try its absolute best to keep the devices working on something useful and not risk idle periods. You can disable this behaviour with the option --failover-only. Q: Is this a virus? A: Cgminer is being packaged with other trojan scripts and some antivirus software is falsely accusing cgminer.exe as being the actual virus, rather than whatever it is being packaged with. If you installed cgminer yourself, then you do not have a virus on your computer. Complain to your antivirus software company. They seem to be flagging even source code now from cgminer as viruses, even though text source files can't do anything by themself. Q: Can you modify the display to include more of one thing in the output and less of another, or can you change the quiet mode or can you add yet another output mode? A: Everyone will always have their own view of what's important to monitor. The defaults are very sane and I have very little interest in changing this any further. Q: What are the best parameters to pass for X pool/hardware/device. A: Virtually always, the DEFAULT parameters give the best results. Most user defined settings lead to worse performance. Q: What happened to CPU and GPU mining? A: Their efficiency makes them irrelevant in the bitcoin mining world today and the author has no interest in supporting alternative coins that are better mined by these devices. Q: GUI version? A: No. The RPC interface makes it possible for someone else to write one though. Q: I'm having an issue. What debugging information should I provide? A: Start cgminer with your regular commands and add -D -T --verbose and provide the full startup output and a summary of your hardware and operating system. Q: Why don't you provide win64 builds? A: Win32 builds work everywhere and there is precisely zero advantage to a 64 bit build on windows. Q: Is it faster to mine on windows or linux? A: It makes no difference in terms of performance. It comes down to choice of operating system for their various features and your comfort level. However linux is the primary development platform and is virtually guaranteed to be more stable. Q: My network gets slower and slower and then dies for a minute? A; Try the --net-delay option if you are on a getwork or GBT server. Q: How do I tune for p2pool? A: It is also recommended to use --failover-only since the work is effectively like a different block chain, and not enabling --no-submit-stale. If mining with a BFL (fpga) minirig, it is worth adding the --bfl-range option. Q: I run PHP on windows to access the API with the example miner.php. Why does it fail when php is installed properly but I only get errors about Sockets not working in the logs? A: http://us.php.net/manual/en/sockets.installation.php Q: What is a PGA? A: At the moment, cgminer supports 3 FPGAs: BitForce, Icarus and ModMiner. They are Field-Programmable Gate Arrays that have been programmed to do Bitcoin mining. Since the acronym needs to be only 3 characters, the "Field-" part has been skipped. Q: What is an ASIC? A: They are Application Specify Integrated Circuit devices and provide the highest performance per unit power due to being dedicated to only one purpose. Q: Can I mine scrypt with FPGAs or ASICs? A: No. Q: What is stratum and how do I use it? A: Stratum is a protocol designed for pooled mining in such a way as to minimise the amount of network communications, yet scale to hardware of any speed. With versions of cgminer 2.8.0+, if a pool has stratum support, cgminer will automatically detect it and switch to the support as advertised if it can. If you input the stratum port directly into your configuration, or use the special prefix "stratum+tcp://" instead of "http://", cgminer will ONLY try to use stratum protocol mining. The advantages of stratum to the miner are no delays in getting more work for the miner, less rejects across block changes, and far less network communications for the same amount of mining hashrate. If you do NOT wish cgminer to automatically switch to stratum protocol even if it is detected, add the --fix-protocol option. Q: Why don't the statistics add up: Accepted, Rejected, Stale, Hardware Errors, Diff1 Work, etc. when mining greater than 1 difficulty shares? A: As an example, if you look at 'Difficulty Accepted' in the RPC API, the number of difficulty shares accepted does not usually exactly equal the amount of work done to find them. If you are mining at 8 difficulty, then you would expect on average to find one 8 difficulty share, per 8 single difficulty shares found. However, the number is actually random and converges over time, it is an average, not an exact value, thus you may find more or less than the expected average. Q: My keyboard input momentarily pauses or repeats keys every so often on windows while mining? A: The USB implementation on windows can be very flaky on some hardware and every time cgminer looks for new hardware to hotplug it it can cause these sorts of problems. You can disable hotplug with: --hotplug 0 Q: What should my Work Utility (WU) be? A: Work utility is the product of hashrate * luck and only stabilises over a very long period of time. Assuming all your work is valid work, bitcoin mining should produce a work utility of approximately 1 per 71.6MH. This means at 5GH you should have a WU of 5000 / 71.6 or ~ 69. You cannot make your machine do "better WU" than this - it is luck related. However you can make it much worse if your machine produces a lot of hardware errors producing invalid work. --- This code is provided entirely free of charge by the programmer in his spare time so donations would be greatly appreciated. Please consider donating to the address below. Con Kolivas <kernel@kolivas.org> 15qSxP1SQcUX3o4nhkfdbgyoWEFMomJ4rZ