Raspberry Pi powered base station for Hummingbird. Reads and decodes LoRa packets and shows 'em to you.
Uses a RFM95 LoRa module wired to the SPI pins on the Pi. Software setup from this adafruit guide
Hardware connections:
- Vin to Raspberry Pi 3.3V
- GND to Raspberry Pi Ground
- RFM RST to Raspberry Pi GPIO #25
- RFM CLK to Raspberry Pi SCK #11
- RFM MISO to Raspberry Pi MISO #9
- RFM MOSI to Raspberry Pi MOSI #10
- RFM CS to Raspberry Pi CE1 #7
Extra maybe?
- RFM G0 to Raspberry Pi GPIO #5