The Imaging Source Linux Repository

This repository will give you additional resources to control your TIS camera.

What do we offer?

gstreamer elements
gobject introspection
uvc extensions
utilities
examples on how to interact with your camera

Documentation

You can find an online version of the included user documentation here:

https://www.theimagingsource.com/documentation/tiscamera/

Dependencies

Compilation

Compilation dependencies for debian can be found be executing:

./scripts/dependency-manager list --compilation

Runtime

Runtime dependencies for debian can by executing:

./scripts/dependency-manager list --runtime

On a Debian / Ubuntu system, the following command line can be used to install all required packages in one go:


./scripts/dependency-manager install

Building tiscamera

The following commands will build and install our software with default settings.

git clone https://github.com/TheImagingSource/tiscamera.git
cd tiscamera
# only works on Debian based systems like Ubuntu
sudo ./scripts/install-dependencies.sh --compilation --runtime
mkdir build
cd build

# With ARAVIS:
cmake -DBUILD_ARAVIS=ON ..
# Without ARAVIS
cmake -DBUILD_ARAVIS=OFF ..

make
sudo make install

The default installation prefix is /usr. Some components have to be installed in /etc and /lib. If you want to change the prefix, read the section installation directories in our documentation.

cmake options

The most important cmake options are:

-DBUILD_ARAVIS=<ON/OFF> Build tiscamera with support for GigE cameras via aravis.
-DBUILD_TOOLS=<ON/OFF> Build additional tools for camera interaction (e.g. firmware tools and tcam-capture).
-DBUILD_V4L2=<ON/OFF> Build tiscamera with support for USB cameras via UVC/V4L2.
-DBUILD_LIBUSB=<ON/OFF> Build tiscamera with support for USB cameras via LibUsb (i.e. AFU420, AFU050, DFK73).
-DBUILD_DOCUMENTATION=<ON/OFF> Build html user documentation.
-DCMAKE_INSTALL_PREFIX Installation target prefix (defaults to /usr/)

For a complete overview, read the section cmake options in out documentation.

Optional for GigE-Vision devices: Start the gige-daemon

GigE-Vision cameras have a several seconds long delay before they can be reliably detected on the network.

To speed up this process for applications, a background daemon is built and installed, which detects cameras before an application starts. The following commands will activate the daemon on your system:

sudo systemctl daemon-reload                 # make systemd aware of gige-daemon
sudo systemctl enable gige-daemon.service    # start on every boot
sudo systemctl start gige-daemon.service     # start the actual daemon
sudo systemctl status gige-daemon.service    # check if statemd say everything is ok

Where to go from here

After installation you can try one of our examples or directly start with a gstreamer pipeline like:

gst-launch-1.0 tcambin ! videoconvert ! ximagesink

alternatively start tcam-capture

Questions, etc.

For questions simply open a ticket or write us a mail at support@theimagingsource.com.

Licensing

All files are published under the Apache License 2.0, unless otherwise noted.

Included libraries: PugiXml 1.6, which is available under the "MIT" license. The json library by Niels Lohmann, which is available under the "MIT" license. 7z, which is published as public domain. aravis, which is available under the LGPLv2. CLI11 available under the 3-Clause BSD-License Catch2 which is published under the Boost Software License, Version 1.0

tainenko/tiscamera