Tiny-M
A compact printer with build volume: 150x150x150 mm
This is a Corona project.
It is based on Voron V0 .
As extruder I used Voron Jetpack.
or my new Nema17 Pocketwatch
A direct drive extruder using Annex Engineering's Sherpa Mini is now available.
Current Version is V4:
latest source whole printer: Tiny-M V4 Onshape
old source is available at Tiny-M V3 Onshape.
This is my first project of this kind. Maybe something will be missing, is not well documented, or just messy. I apologize for that.
Why the whole thing?
I had many 3D printer parts in my pocket from my old no longer used printer. I cleared out my pocket and took what I had in the box without buying anything new. After checking all parts, I recognize, that I could build a converted Voron V0 with this parts.
Hardware
- 2020 Nut 5 I-Typ alu profiles (6mm wide slot Misumi 2020 will work)
- Nema 17 stepper motors
- 3x 200mm MGN9H for XY
- 2x 200mm MGN12H for Z
- FYSETC Cheetah V1.1b (TMC2209) or SKR Mini E3 with TMC2209
- 24V everywhere
BOM
DRAFT BOM is available now. Thanks to CookieSN !
WARNING ! The store Funssor on aliexpress sell a V0 kit with pictures of my Tiny-M. He use picture from github. To be clear IT IS NOT a Tiny-M Kit. Please don't buy it , if you want to build a Tiny-M.
Build Tips
There are 3 versions of the XY-Joins.
- V2 - use 2GT 20T pulleys - No Set Screw Hub
- The outer diameter of the flanges from the pulleys for XY Joins will not fit.
- You will need to grind the flanges to fit.
- V3 - use 2GT 20T toothed idler and no M5 Nuts
- V4 - split into 3 parts
- removed one M5 screw for better alignment
- optimized belt path to use E3D idler (10mm high) or chinese (9mm high)
- some design changes
- more rigid
Mark Hoy's Excellent Build Log
User Mods
There are several user mod STLs in the usermods directory.
190^3 Mod which uses Prusa mini bed plates
Xile's Sherpa Direct Drive Toolhead
Ocho Camino's Sailfin Direct Drive Toolhead
Discord
The CroXY Discord has a tiny-m channel where several Tiny-M builders hang out.
Images
V4
old