ApproxMC4: Approximate Model Counter

ApproxMCv4 is a state-of-the-art approximate model counter utilizing an improved version of CryptoMiniSat to give approximate model counts to problems of size and complexity that were not possible before.

This work is by Mate Soos, Stephan Gocht, and Kuldeep S. Meel, as published in AAAI-19 and in CAV2020. A large part of the work is in CryptoMiniSat here.

ApproxMC handles CNF formulas and performs approximate counting.

If you are interested in exact model counting, visit our exact counter Ganak
If you are instead interested in DNF formulas, visit our approximate DNF counter Pepin.

How to use the Python interface

Install using pip:

pip install pyapproxmc

Then you can use it as:

import pyapproxmc
c = pyapproxmc.Counter()
c.add_clause([1,2,3])
c.add_clause([3,20])
count = c.count()
print("Approximate count is: %d*2**%d" % (count[0], count[1]))

The above will print that Approximate count is: 11*2**16. Since the largest variable in the clauses was 20, the system contained 2**20 (i.e. 1048576) potential models. However, some of these models were prohibited by the two clauses, and so only approximately 11*2**16 (i.e. 720896) models remained.

If you want to count over a projection set, you need to call count(projection_set), for example:

import pyapproxmc
c = pyapproxmc.Counter()
c.add_clause([1,2,3])
c.add_clause([3,20])
count = c.count(range(1,10))
print("Approximate count is: %d*2**%d" % (count[0], count[1]))

This now prints Approximate count is: 7*2**6, which corresponds to the approximate count of models, projected over variables 1..10.

How to Build a Binary

To build on Linux, you will need the following:

sudo apt-get install build-essential cmake
apt-get install libgmp3-dev

Then, build CryptoMiniSat, Arjun, and ApproxMC:

# not required but very useful
sudo apt-get install zlib1g-dev

git clone https://github.com/meelgroup/cadical
cd cadical
git checkout mate-only-libraries-1.8.0
./configure
make
cd ..

git clone https://github.com/meelgroup/cadiback
cd cadiback
git checkout mate
./configure
make
cd ..

git clone https://github.com/msoos/cryptominisat
cd cryptominisat
mkdir build && cd build
cmake ..
make
cd ../..

git clone https://github.com/meelgroup/sbva
cd sbva
mkdir build && cd build
cmake ..
make
cd ../..

git clone https://github.com/meelgroup/arjun
cd arjun
mkdir build && cd build
cmake ..
make
cd ../..

git clone https://github.com/meelgroup/approxmc
cd approxmc
mkdir build && cd build
cmake ..
make
sudo make install
sudo ldconfig

How to Use the Binary

First, you must translate your problem to CNF and just pass your file as input to ApproxMC. Voila -- and it will print the number of solutions of the given CNF formula.

Providing a Sampling Set

For some applications, one is not interested in solutions over all the variables and instead interested in counting the number of unique solutions to a subset of variables, called sampling set. ApproxMC allows you to specify the sampling set using the following modified version of DIMACS format:

$ cat myfile.cnf
c ind 1 3 4 6 7 8 10 0
p cnf 500 1
3 4 0

Above, using the c ind line, we declare that only variables 1, 3, 4, 6, 7, 8 and 10 form part of the sampling set out of the CNF's 500 variables 1,2...500. This line must end with a 0. The solution that ApproxMC will be giving is essentially answering the question: how many different combination of settings to this variables are there that satisfy this problem? Naturally, if your sampling set only contains 7 variables, then the maximum number of solutions can only be at most 2^7 = 128. This is true even if your CNF has thousands of variables.

Running ApproxMC

In our case, the maximum number of solutions could at most be 2^7=128, but our CNF should be restricting this. Let's see:

$ approxmc --seed 5 myfile.cnf
c ApproxMC version 3.0
[...]
c CryptoMiniSat SHA revision [...]
c Using code from 'When Boolean Satisfiability Meets Gauss-E. in a Simplex Way'
[...]
[appmc] using seed: 5
[appmc] Sampling set size: 7
[appmc] Sampling set: 1, 3, 4, 6, 7, 8, 10,
[appmc] Using start iteration 0
[appmc] [    0.00 ] bounded_sol_count looking for   73 solutions -- hashes active: 0
[appmc] [    0.01 ] bounded_sol_count looking for   73 solutions -- hashes active: 1
[appmc] [    0.01 ] bounded_sol_count looking for   73 solutions -- hashes active: 0
[...]
[appmc] FINISHED ApproxMC T: 0.04 s
c [appmc] Number of solutions is: 48*2**1
s mc 96

ApproxMC reports that we have approximately 96 (=48*2) solutions to the CNF's independent support. This is because for variables 3 and 4 we have banned the false,false solution, so out of their 4 possible settings, one is banned. Therefore, we have 2^5 * (4-1) = 96 solutions.

Guarantees

ApproxMC provides so-called "PAC", or Probably Approximately Correct, guarantees. In less fancy words, the system guarantees that the solution found is within a certain tolerance (called "epsilon") with a certain probability (called "delta"). The default tolerance and probability, i.e. epsilon and delta values, are set to 0.8 and 0.2, respectively. Both values are configurable.

Library usage

The system can be used as a library:

#include <approxmc/approxmc.h>
#include <vector>
#include <complex>
#include <cassert>

using std::vector;
using namespace ApproxMC;
using namespace CMSat;

int main() {
    AppMC appmc;
    appmc.new_vars(10);

    vector<Lit> clause;

    //add "-3 4 0"
    clause.clear();
    clause.push_back(Lit(2, true));
    clause.push_back(Lit(3, false));
    appmc.add_clause(clause);

    //add "3 -4 0"
    clause.clear();
    clause.push_back(Lit(2, false));
    clause.push_back(Lit(3, true));
    appmc.add_clause(clause);

    SolCount c = appmc.count();
    uint32_t cnt = std::pow(2, c.hashCount)*c.cellSolCount;
    assert(cnt == std::pow(2, 9));

    return 0;
}

ApproxMC5: Sparse-XOR based Approximate Model Counter

Note: this is beta version release, not recommended for general use. We are currently working on a tight integration of sparse XORs into ApproxMC based on our LICS-20 paper. You can turn on the sparse XORs using the flag "sparse" but beware as reported in LICS-20 paper, this may slow down in some cases; it is likely to give a significant speedup if the number of solutions is very large.

Issues, questions, bugs, etc.

Please click on "issues" at the top and create a new issue. All issues are responded to promptly.

How to Cite

If you use ApproxMC, please cite the following papers: CAV20, AAAI19 and IJCAI16.

If you use sparse XORs, please also cite the LICS20 paper.

ApproxMC builds on a series of papers on hashing-based approach: Related Publications

The benchmarks used in our evaluation can be found here.

Old Versions

The old version, 2.0 is available under the branch "ver2". Please check out the releases for the 2.x versions under GitHub releases. Please read the README of the old release to know how to compile the code. Old releases should easily compile.

tanyongkiam/approxmc