/BIGTREETECH-TouchScreenFirmware

support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1

Primary LanguageCGNU General Public License v3.0GPL-3.0

BigTreeTech Touchscreen Firmware

GitHub GitHub contributors GitHub Release Date Build Status

Firmware for BigTreeTech's dual-mode touchscreen 3D printer controllers

Table of Contents

Menus and Themes

Classic Menu & Icon Theme Unified Menu & Material Icon Theme
Use firmware, icons, and fonts from the Copy to SD Card root directory to update folder Use firmware, icons, and fonts from the Copy to SD Card root directory to update - Unified Menu Material theme folder

Update TFT Firmware

TFT firmware updates are comprised of three parts:

  1. The firmware binary (BIGTREE_TFT*_V*.*.*.bin). Example: BIGTREE_TFT35_V3.0.26.1.bin:
    • BIGTREE_TFT_35: model
    • V3.0: hardware version
    • 26.1: software version
  2. Fonts and Icons (TFT* folder):
    • TFT*/font: fonts
    • TFT*/bmp: icons
  3. The config.ini file

Copy the BIGTREE_TFT*_V*.*.*.bin,the TFT*` folder and the config.ini to the root of a blank SD card that is <8GB and formatted as FAT32:

Untitled

Place SD card with the BIGTREE_TFT*_V*.*.*.bin, theTFT* folder and the config.ini into the TFT's SD card reader and power cycle your printer to start the update process.

⚠️ Failing to update your icons & fonts will result in missing icons and/or unreadable text ⚠️

Update Prozess shown on TFT Screen

A successful update looks like this on the screen:

Screenshot 2020-09-25 at 23 36 25

Configuration

The Firmware can be configured using the config.ini file from from one of these folders: Copy to SD Card root directory to update or Copy to SD Card root directory to update - Unified Menu Material theme

Editing configuration (config.ini) file

To edit the config.ini file follow the instruction here: Detailed Instructions here

Updating Firmware Configuration

To update the Firmware configuration:

  1. Edit the settings in config.ini.
  2. Copy the config.ini file to the root of the SD card. (The SD card capacity should be less than or equal to 8GB and formatted as FAT32)
  3. Insert the SD card in the TFT's SD card slot and restart the TFT by pressing the reset buttion or disconnecting and connecting the power cable.
  4. The TFT will update and store the configuration form config.ini file.

The config.ini can be edited using a simple text editor (make sure to use UTF encoding) and uploaded again - without the need to upload the firmware or the TFT folder - as long as the firmware is the same version number.

Customization

Bootscreen and Icons

See Customization guides for detailed information.

Firmware

View full instructions
  1. Setup Visual Studio Code with PlatformIO instructions
  2. Click on the PlatformIO icon (①) and then click on Open Project (②):
  3. Find the BIGTREETECH firmware source directory , then click Open:
  4. After opening the project, edit platformio.ini and change the default_envs to one that matches your TFT model and version: 
    ;BIGTREE_TFT35_V1_0
;BIGTREE_TFT35_V1_1
;BIGTREE_TFT35_V1_2
;BIGTREE_TFT35_V2_0
;BIGTREE_TFT35_V3_0
;BIGTREE_TFT35_E3_V3_0
;BIGTREE_TFT28_V1_0
;BIGTREE_TFT28_V3_0
;BIGTREE_TFT24_V1_1
;MKS_32_V1_4
;MKS_32_V1_4_NOBL

    [platformio]
src_dir      = TFT
boards_dir   = buildroot/boards
default_envs = BIGTREE_TFT35_V3_0

  5. Click the check mark (✓) at the bottom of VSCode or press Ctrl+Alt+B (Windows) / Ctrl+Option+B (macOS) to compile.

  6. A BIGTREE_TFT*_V*.*.*.bin file will be generated in the hidden .pio\build\BIGTREE_TFT*_V*_* folder. Follow the update process outlined in the About TFT Firmware section above to update your TFT to the latest version.

Troubleshooting

To reset the TFT's touch screen calibration, create a blank file named reset.txt and place in root folder of the sd card. Insert the SD card into the TFT's SD card reader and power cycle your printer to start the reset process.

Version History

See BIGTREETECH-TouchScreenFirmware/releases for a complete version history.