Make problem

Question

Make problem

Opened this issue 4 years ago · 29 comments

I have a problem compiling open-ethereum-pool. Previously, everything was without problems, i.e. on 4 November 2020 and on 5 November 2020, something went together.

ERROR
util/util.go:38:16: undefined: common.ToHex

Answer 1 · 2020-11-05T14:00:41.000Z

Same error here

Answer 2 · 2020-11-05T17:00:11.000Z

me too util/util.go:38:16: undefined: common.ToHex

Answer 3 · 2020-11-06T12:21:05.000Z

github.com/techievee/ethash-mining-pool/util

util/util.go:38:16: undefined: common.ToHex
Makefile:10: recipe for target 'all' failed
make: *** [all] Error 2

Answer 4 · 2020-11-10T19:24:43.000Z

please help solved problem

Answer 5 · 2020-11-10T21:05:34.000Z

Work :D
http://startmining.pl/

Answer 6 · 2020-11-10T21:15:11.000Z

What is solution?

Answer 7 · 2020-12-23T14:55:56.000Z

If you are trying to make open-ethereum-pool you will need to make changes in util.go and rpc.go to build it. in rpc.go you need to change line 15 from "github.com/ethereum/go-ethereum/common" TO "github.com/ethereum/go-ethereum/common/hexutil" Then on line 180 change rpcResp, err := r.doPost(r.Url, "eth_sign", []string{from, common.ToHex(hash[:])}) TO: rpcResp, err := r.doPost(r.Url, "eth_sign", []string{from, hexutil.Encode(hash[:])})

In util.go line 10 add: "github.com/ethereum/go-ethereum/common/hexutil"

line 38 change return string(common.ToHex(diff1.Bytes())) TO: return string(hexutil.Encode(diff1.Bytes()))

then make clean and make and you should be good to go

Answer 8 · 2021-01-21T17:42:29.000Z

If you are trying to make open-ethereum-pool you will need to make changes in util.go and rpc.go to build it. in rpc.go you need to change line 15 from "github.com/ethereum/go-ethereum/common" TO "github.com/ethereum/go-ethereum/common/hexutil" Then on line 180 change rpcResp, err := r.doPost(r.Url, "eth_sign", []string{from, common.ToHex(hash[:])}) TO: rpcResp, err := r.doPost(r.Url, "eth_sign", []string{from, hexutil.Encode(hash[:])})

In util.go line 10 add: "github.com/ethereum/go-ethereum/common/hexutil"

line 38 change return string(common.ToHex(diff1.Bytes())) TO: return string(hexutil.Encode(diff1.Bytes()))

then make clean and make and you should be good to go

Got the same problem with

Makefile:10: recipe for target 'all' failed
make: *** [all] Error 2

Answer 9 · 2021-12-22T02:03:57.000Z

If you are trying to make open-ethereum-pool you will need to make changes in util.go and rpc.go to build it. in rpc.go you need to change line 15 from "github.com/ethereum/go-ethereum/common" TO "github.com/ethereum/go-ethereum/common/hexutil" Then on line 180 change rpcResp, err := r.doPost(r.Url, "eth_sign", []string{from, common.ToHex(hash[:])}) TO: rpcResp, err := r.doPost(r.Url, "eth_sign", []string{from, hexutil.Encode(hash[:])})
In util.go line 10 add: "github.com/ethereum/go-ethereum/common/hexutil"
line 38 change return string(common.ToHex(diff1.Bytes())) TO: return string(hexutil.Encode(diff1.Bytes()))
then make clean and make and you should be good to go

Got the same problem with

Makefile:10: recipe for target 'all' failed make: *** [all] Error 2

got the same error, bro how to fix it?

Answer 10 · 2021-12-22T02:11:27.000Z

mp-classic/ETCpool working ETC pool with charts and modified frontend. Have fun

Answer 11 · 2022-02-22T07:23:28.000Z

done build !

Answer 12 · 2022-03-22T01:38:47.000Z

mp-classic/ETCpool working ETC pool with charts and modified frontend. Have fun

Can u please help me in config.json ? I'm lost there, i've copied api.json to test but getting Syntax error. I'm not a programmer but i don't see nothing wrong in the renamed config.json (api.json)
Actually this was the first fork i was able to compile but i dont unknown how to run it.
BTW, i known its a hard work make a instructions tutorial. If you could give me some clues to follow I think it's enough.
Thanks in advance

Answer 13 · 2022-03-23T09:08:49.000Z

I could set it up for you in couple of minutes. You should have a up and running VM with SSD, minimum 4 core vCPU (recommended 8vCPU) and 8GB ram at minimum. From there the pool takes about few minutes and the blockchain sync should take about few hours (2 to 6 hours). The only thing remaining is the look of the website pool to get it done as you like. You have attached to this email some screenshots that were made with the pool interface. Best regards, Cristian Vasiliu CIS
…
________________________________ From: Teleloco @.> Sent: Tuesday, March 22, 2022 1:38:58 AM To: techievee/ethash-mining-pool @.> Cc: cristianvsl @.>; Comment @.> Subject: Re: [techievee/ethash-mining-pool] Make problem (#7) mp-classic/ETCpool working ETC pool with charts and modified frontend. Have fun Can u please help me in config.json ? I'm lost there, i've copied api.json to test but getting Syntax error. I'm not a programmer but i don't see nothing wrong in the renamed config.json (api.json) Actually this was the first i was able to compile but i dont unknown how to run it. Thanks in advance — Reply to this email directly, view it on GitHub<#7 (comment)>, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ARZGZD5CQPWPV3CCVYGS23LVBEQDFANCNFSM4TLLHYAQ. You are receiving this because you commented.Message ID: @.***>

Thanks for ur offer, but i dont trust anyone. Its my deffect. But if u want to help here i would really apreciate that.
Regards

Answer 14 · 2022-03-23T12:51:24.000Z

You are very kind. What can I offer in exchange for you to make a video of no more than 5' and upload it to YT with the steps? You can put the link here. And what you want in return, first.

Answer 15 · 2022-03-23T13:58:06.000Z

U make me smile in a bad day. And now i'm sure that still exist good people out there. Thanks u. I really apreciate that.

Answer 16 · 2022-03-23T14:05:05.000Z

I have blockchain Classic up to date. Ubuntu on VM with 16 vCPU, 32gb RAM and 2tb of storage ( zvol, zraid3). Fork of mp-classic/ETCPool compiled, and all dependencies installed.

Answer 17 · 2022-03-23T14:24:28.000Z

Did you change all the ip's? including ip's from /www/config/environment.js? after changing the ip's from /www/config/environment.js you have to go back to the directory /www and run ( build.sh ). If you didnt got any "permission denied" from env.sh and build.sh, you`re ready to start the pool with this command ( ./build/bin/open-etc-pool-friends api.json ) You should run it like this: screen -S api ./build/bin/open-etc-pool-friends api.json. Same command for proxy.json, payouts.json, unlocker.json.

Answer 18 · 2022-03-23T14:30:05.000Z

I have saved the README.md with all the steps. Check it out

Answer 19 · 2022-03-23T14:39:42.000Z

No, i did not change the ip's of anything. I didn't understand how it works until you just explained it to me. So, I have to configure the frontend before executing something? It starts to make sense.
I thought that only with the config.json I could get the system up and running even without a page. So, is the pool executed several times with different configuration files such as payments.json for that to work, as a module?

Answer 20 · 2022-03-23T14:45:18.000Z

Running every json separate is easier to know when or if any of the modules have crashed so you can restart it.
Before building the frontend you need to change the IP's from: api.json, proxy.json, unlocker.json, payouts.json and from /www/config/environment.json. Where you see the IP 0.0.0.0, do not change it. Same if you see 127.0.0.1. Basically you`d need to change "etc.miningpub.uk" where you see it in any of the config files.

Answer 21 · 2022-03-23T14:46:06.000Z

After cloning the pool, did you run ( make ) command?

Answer 22 · 2022-03-23T14:50:09.000Z

Yeah, in api.json i've changed all adress to localhost (127.0.0.1)
And, yes, after cloning i run make and was succesful. The changes, i assume mean to be before of make?

Answer 23 · 2022-03-23T14:59:26.000Z

Youll also need to install nginx. After installing nginx, and after building the frontend, go to the pool main folder /ETCpool and run this command ( sudo cp /misc/nginx-default.conf /etc/nginx/sites-available/default ) Then run ( sudo nano /etc/nginx/sites-available/default ) and youll see the following

`
upstream api {
server 127.0.0.1:8080; (Here you need to change the IP 127.0.0.1 with your IP used in the api.json file)
}

server {
listen 0.0.0.0:80;
root /path/to/pool/www/dist; (Your path to pool - /home/yourUsername/ETCpool/www/dist)
index index.html index.htm;

server_name localhost;

location /api {
	proxy_pass http://api;
}

location / {
	try_files $uri $uri/ /index.html;
}

}
`

After this hit CTRL + x and Y to save it.

From this point if everything is alright, start running the pool modules one by one with "screen" command. To exit a screen (after running ./build/bin/open-etc-pool-friends api.json for example) just hit CTRL + a + d. To bring up any of the modules on screen you type: screen -r api or screen -r proxy and so on.

Let me know how it goes and maybe share a link to the pool frontend.

All the things i`ve said to you here, looks like a lot maybe but in practice should take you about few minutes to do everything. Cheers

Answer 24 · 2022-03-23T15:01:58.000Z

Attention tho to each module that only part of the code is "true". on api.json only the api part of the code is enabled, same for the rest of the json's.

Answer 25 · 2022-03-23T15:04:54.000Z

Having 16vCores you should set
// Set to the number of CPU cores of your server
"threads": 2,
for each module.

Later on you`ll learn that the payouts module can be run only once a day so it doesn need to run continuosly.

Answer 26 · 2022-03-23T15:09:37.000Z

Now I think I can get it working. My plan is to firstly run the pool closely. For me and my friends, if everything works fine, pay to somebody to make a custom front end, assign a public domain domain and share. So in the future i can add more coins, like RVN and ETH. All this, if I have your permission.
Thank u man. You explained it to me down to the last detail.
One last question, about bandwith, 60MB/s simmetrics is enough?

Answer 27 · 2022-03-23T16:09:16.000Z

Did you change all the ip's? including ip's from /www/config/environment.js? after changing the ip's from /www/config/environment.js you have to go back to the directory /www and run ( build.sh ). If you didnt got any "permission denied" from env.sh and build.sh, you`re ready to start the pool with this command ( ./build/bin/open-etc-pool-friends api.json ) You should run it like this: screen -S api ./build/bin/open-etc-pool-friends api.json. Same command for proxy.json, payouts.json, unlocker.json.

I dont have environment.js in that path. is strictly necessary? Where i can find it?
Seems like a lot of work for me, but is good to learn

Answer 28 · 2022-03-23T17:48:19.000Z

Okay,

Let's take it step by step.

git clone https://github.com/mp-classic/ETCpool.git
cd ETCpool
chmod 775 /build/env.sh
cd ..
make
cd www
cd config
nano environment.js (modify the IP's)
cd .. (to go back to www folder)
chmod 775 build.sh
./build.sh (and wait)
After the build is done, install nginx and follow the steps ive already gave to you in the above comments!

Answer 29 · 2022-03-23T17:50:56.000Z

Before doing the above, make sure you have nodejs installed (use nvm from github) and ember-cli@2.13 is also installed.
Also before doing the above steps do this:
npm install -g ember-cli@2.13
npm install -g bower
sudo chown -R $USER:$GROUP ~/.npm
sudo chown -R $USER:$GROUP ~/.config
npm install
bower install