losant-mqtt-esp-idf

ESP-IDF MQTT Client for connecting devices to the Losant IoT Platform

[dependencies]
losant-mqtt-esp-idf = "1.0"

Usage

add your application key and secret to a cfg.toml file in your crate root; see cfg.example.toml
see the examples

Examples

add Losant and wifi info to a cfg.toml file in the crate root (make sure to .gitignore!); see cfg.example.toml

if using WSL, use usbipd to expose a USB device to WSL (Microsoft docs)

install usbipd in a PowerShell/CMD terminal

# all of the following require admin mode
winget install --interactive --exact dorssel.usbipd-win
usbipd wsl list # may need a new terminal window to refresh env
usbipd wsl attach --auto-attach --busid <BUSID>

check that the device is accessible within WSL

lsusb # e.g. Bus 001 Device 002: ID 303a:1001 Espressif USB JTAG/serial debug unit

run an example; replace the --target argument with your board's respective compiler target

using espflash v2

cargo run --example=esp32-c3-devkit-rust-1 --release --target=riscv32imc-esp-espidf

using cargo-espflash v2

cargo espflash flash --monitor --example=esp32-c3-devkit-rust-1 --release --target=riscv32imc-esp-espidf

using espflash v2 (manual)

cargo build --example=esp32-c3-devkit-rust-1 --release --target=riscv32imc-esp-espidf
espflash flash --monitor target/riscv32imc-esp-espidf/release/examples/wifi

tedbyron/losant-mqtt-esp-idf

losant-mqtt-esp-idf

Usage

Examples