MultiFiller

Modular Beercan/Bottle filler

MultiFiller is a OpenSource semi-auto beercan or bottle filler.

!This is a "work in progress" project!

In action Youtube video

Navigation

Todo/Checklist

Counter pressure filling

Verify design
Verify minimal foam build up when filling

Counter Pressure filling

Parts list:

MFIller_CAN_CounterPressure_w_gasline_noVitamins-TPU.stl STL List or Download - (RightClickSaveAs)
MFiller_guide_cylinder_mount-PLA.stl STL List or Download - (RightClickSaveAs)
MFiller_guide_cylinder-PLA_v1.1.stl STL List or Download - (RightClickSaveAs)
MFiller_guide_cylinder-stopper-PLA_v1.1.stl STL List or Download - (RightClickSaveAs)
MFiller_CAN_Shelf-PLA.stl STL List or Download - (RightClickSaveAs)
1/4" pipe/rod (stainless steel) Link
1/4" tube (PVC/silicon) Link
1/4" tube (PE) Link
Rubberband (available at any random convenience store) Link
Optional:
- Manual Air Valve 1/4" Link (Could be used for Co2 inlet, Co2 Outlet, and beer lines)

How to use

button#1 (Yellow) = Calibration (Press and hold)
button#2 (Green) = Filler #1 (Momentarily press)
button#3 (Blue) = Filler #1 and Filler #2 at same time (Momentarily press)
button#4 (Red) = Emergency shutdown (Press and hold)

Calibration

Button#1

- Press and hold button#1 (it will start to pour beer from Filler #1)
This is to calibrate how long it takes to fill your can or bottle
When the can/bottle is filled to desired levels, release the button#1

Test fill / Filler #1

Button#2

- Momentarily press button#2
   Filler#1: Co2 will purge for 4 seconds
   Filler#1: Beer flows for x (calibrated seconds)
   Filler#1: Co2 will purge on/off rapidly 8 times

Filler #1 and #2

Button#3

- Momentarily press button#3
   Filler#1 and #2: Co2 will purge for 4 seconds
   Filler#1 and #2: Beer flows for x (calibrated seconds)
   Filler#1 and #2: Co2 will purge on/off rapidly 8 times

Emergency shutdown

button#4

- Emergency shutdown (Press and hold)

tedelm/MultiFiller