/****************************************************************************** * RASPBERRY PI BACNET CONTROLLER *****************************************************************************/ ### Procedure to compile ### - Unzip the project and copy it to home or any directory of your choice in RPi - Browse to RasberryPiBacnetController directory - enter command 'sudo make' to compile code - enter command 'sudo make clean' to clean code ### To Run project ### - Execute below command after compiling project ./BAS_RPi_Port - The 'BAS_RPi_Port' linux executable file is located at '../RasberryPiBacnetController/' path ### Prerequisites ### - Raspberry pi should have g++ compiler To install g++ compiler, enter below command: sudo apt-get install build-essential ### GLOSSARY ### APDU - The application Protocol Data Unit. The APDU is made up of an APCI block and an ASDU. APCI - (Application Protocol Control Information) contains message control information. ASDU - (Application Specific Data Unit) contains information to be processed by the receiving station. Want-Points - A point being requested from a network. A list of want-points is created in each controller when a point in another controller is referenced in a program, system group, or trend log. Points - Any hardware or software object configured in a digital controller. A point can be an input, output, variable, schedule, log, or PID controller loop. ### BAS_RPi_Port project revision ###