SimpleCov

Code coverage for Ruby

SimpleCov is a code coverage analysis tool for Ruby. It uses Ruby's built-in Coverage library to gather code coverage data, but makes processing its results much easier by providing a clean API to filter, group, merge, format, and display those results, giving you a complete code coverage suite that can be set up with just a couple lines of code.

In most cases, you'll want overall coverage results for your projects, including all types of tests, Cucumber features, etc. SimpleCov automatically takes care of this by caching and merging results when generating reports, so your report actually includes coverage across your test suites and thereby gives you a better picture of blank spots.

The official formatter of SimpleCov is packaged as a separate gem called simplecov-html, but will be installed and configured automatically when you launch SimpleCov. If you're curious, you can find it on GitHub, too.

Contact

Code and Bug Reports

Issue Tracker
See CONTRIBUTING for how to contribute along with some common problems to check out before creating an issue.

Questions, Problems, Suggestions, etc.

Mailing List "Open mailing list for discussion and announcements on Google Groups"

Getting started

Add SimpleCov to your Gemfile and bundle install:

gem 'simplecov', require: false, group: :test

Load and launch SimpleCov at the very top of your test/test_helper.rb (or spec_helper.rb, rails_helper, cucumber env.rb, or whatever your preferred test framework uses):
```
require 'simplecov'
SimpleCov.start

# Previous content of test helper now starts here
```
Note: If SimpleCov starts after your application code is already loaded (via require), it won't be able to track your files and their coverage! The SimpleCov.start must be issued before any of your application code is required!

SimpleCov must be running in the process that you want the code coverage analysis to happen on. When testing a server process (e.g. a JSON API endpoint) via a separate test process (e.g. when using Selenium) where you want to see all code executed by the rails server, and not just code executed in your actual test files, you'll want to add something like this to the top of bin/rails, but below the "shebang" line (#! /usr/bin/env ruby):
```
if ENV['RAILS_ENV'] == 'test'
  require 'simplecov'
  SimpleCov.start 'rails'
  puts "required simplecov"
end
```
Run your full test suite to see the percent coverage that your application has.
After running your tests, open coverage/index.html in the browser of your choice. For example, in a Mac Terminal, run the following command from your application's root directory:

open coverage/index.html

Note: This guide can help if you're unsure which command your particular operating system requires. 5. Add the following to your .gitignore file to ensure that coverage results are not tracked by Git (optional):

echo "coverage" >> .gitignore

Or if you use Windows:

echo coverage >> .gitignore

If you're making a Rails application, SimpleCov comes with built-in configurations (see below for information on profiles) that will get you started with groups for your Controllers, Views, Models and Helpers. To use it, the first two lines of your test_helper should be like this:

require 'simplecov'
SimpleCov.start 'rails'

Example output

Coverage results report, fully browsable locally with sorting and much more:

Source file coverage details view:

Use it with any framework!

Similarly to the usage with Test::Unit described above, the only thing you have to do is to add the SimpleCov config to the very top of your Cucumber/RSpec/whatever setup file.

Add the setup code to the top of features/support/env.rb (for Cucumber) or spec/spec_helper.rb (for RSpec). Other test frameworks should work accordingly, whatever their setup file may be:

require 'simplecov'
SimpleCov.start 'rails'

You could even track what kind of code your UI testers are touching if you want to go overboard with things. SimpleCov does not care what kind of framework it is running in; it just looks at what code is being executed and generates a report about it.

Notes on specific frameworks and test utilities

For some frameworks and testing tools there are quirks and problems you might want to know about if you want to use SimpleCov with them. Here's an overview of the known ones:

Framework	Notes	Issue
parallel_tests	As of 0.8.0, SimpleCov should correctly recognize parallel_tests and supplement your test suite names with their corresponding test env numbers. SimpleCov locks the resultset cache while merging, ensuring no race conditions occur when results are merged.	#64 & #185
RubyMine	The RubyMine IDE has built-in support for SimpleCov's coverage reports, though you might need to explicitly set the output root using `SimpleCov.root('foo/bar/baz')`	#95
Spork	Because of how Spork works internally (using preforking), there used to be trouble when using SimpleCov with it, but that has apparently been resolved with a specific configuration strategy. See this comment.	#42
Spring	See section below.	#381
Test/Unit	Test Unit 2 used to mess with ARGV, leading to a failure to detect the test process name in SimpleCov. `test-unit` releases 2.4.3+ (Dec 11th, 2011) should have this problem resolved.	#45 & test-unit/test-unit#12

Configuring SimpleCov

Configuration settings can be applied in three formats, which are completely equivalent:

The most common way is to configure it directly in your start block:
```
SimpleCov.start do
  some_config_option 'foo'
end
```
You can also set all configuration options directly:
```
SimpleCov.some_config_option 'foo'
```
If you do not want to start coverage immediately after launch or want to add additional configuration later on in a concise way, use:
```
SimpleCov.configure do
  some_config_option 'foo'
end
```

Please check out the Configuration API documentation to find out what you can customize.

Using .simplecov for centralized config

If you use SimpleCov to merge multiple test suite results (e.g. Test/Unit and Cucumber) into a single report, you'd normally have to set up all your config options twice, once in test_helper.rb and once in env.rb.

To avoid this, you can place a file called .simplecov in your project root. You can then just leave the require 'simplecov' in each test setup helper (at the top) and move the SimpleCov.start code with all your custom config options into .simplecov:

# test/test_helper.rb
require 'simplecov'

# features/support/env.rb
require 'simplecov'

# .simplecov
SimpleCov.start 'rails' do
  # any custom configs like groups and filters can be here at a central place
end

Using .simplecov rather than separately requiring SimpleCov multiple times is recommended if you are merging multiple test frameworks like Cucumber and RSpec that rely on each other, as invoking SimpleCov multiple times can cause coverage information to be lost.

Filters

Filters can be used to remove selected files from your coverage data. By default, a filter is applied that removes all files OUTSIDE of your project's root directory - otherwise you'd end up with billions of coverage reports for source files in the gems you are using.

You can define your own to remove things like configuration files, tests or whatever you don't need in your coverage report.

Defining custom filters

You can currently define a filter using either a String or Regexp (that will then be Regexp-matched against each source file's path), a block or by passing in your own Filter class.

String filter

SimpleCov.start do
  add_filter "/test/"
end

This simple string filter will remove all files that match "/test/" in their path.

Regex filter

SimpleCov.start do
  add_filter %r{^/test/}
end

This simple regex filter will remove all files that start with /test/ in their path.

Block filter

SimpleCov.start do
  add_filter do |source_file|
    source_file.lines.count < 5
  end
end

Block filters receive a SimpleCov::SourceFile instance and expect your block to return either true (if the file is to be removed from the result) or false (if the result should be kept). Please check out the RDoc for SimpleCov::SourceFile to learn about the methods available to you. In the above example, the filter will remove all files that have less than 5 lines of code.

Custom filter class

class LineFilter < SimpleCov::Filter
  def matches?(source_file)
    source_file.lines.count < filter_argument
  end
end

SimpleCov.add_filter LineFilter.new(5)

Defining your own filters is pretty easy: Just inherit from SimpleCov::Filter and define a method 'matches?(source_file)'. When running the filter, a true return value from this method will result in the removal of the given source_file. The filter_argument method is being set in the SimpleCov::Filter initialize method and thus is set to 5 in this example.

Array filter

SimpleCov.start do
  proc = Proc.new { |source_file| false }
  add_filter ["string", /regex/, proc, LineFilter.new(5)]
end

You can pass in an array containing any of the other filter types.

Ignoring/skipping code

You can exclude code from the coverage report by wrapping it in # :nocov:.

# :nocov:
def skip_this_method
  never_reached
end
# :nocov:

The name of the token can be changed to your liking. Learn more about the nocov feature.

Note: You shouldn't have to use the nocov token to skip private methods that are being included in your coverage. If you appropriately test the public interface of your classes and objects you should automatically get full coverage of your private methods.

Default root filter and coverage for things outside of it

By default, SimpleCov filters everything outside of the SimpleCov.root directory. However, sometimes you may want to include coverage reports for things you include as a gem, for example a Rails Engine.

Here's an example by @lsaffie from #221 that shows how you can achieve just that:

SimpleCov.start :rails do
  filters.clear # This will remove the :root_filter and :bundler_filter that come via simplecov's defaults
  add_filter do |src|
    !(src.filename =~ /^#{SimpleCov.root}/) unless src.filename =~ /my_engine/
  end
end

Groups

You can separate your source files into groups. For example, in a Rails app, you'll want to have separate listings for Models, Controllers, Helpers, and Libs. Group definition works similarly to Filters (and also accepts custom filter classes), but source files end up in a group when the filter passes (returns true), as opposed to filtering results, which exclude files from results when the filter results in a true value.

Add your groups with:

SimpleCov.start do
  add_group "Models", "app/models"
  add_group "Controllers", "app/controllers"
  add_group "Long files" do |src_file|
    src_file.lines.count > 100
  end
  add_group "Multiple Files", ["app/models", "app/controllers"] # You can also pass in an array
  add_group "Short files", LineFilter.new(5) # Using the LineFilter class defined in Filters section above
end

Merging results

You normally want to have your coverage analyzed across ALL of your test suites, right?

Simplecov automatically caches coverage results in your (coverage_path)/.resultset.json. Those results will then be automatically merged when generating the result, so when coverage is set up properly for Cucumber and your unit / functional / integration tests, all of those test suites will be taken into account when building the coverage report.

There are two things to note here though:

Test suite names

SimpleCov tries to guess the name of the currently running test suite based upon the shell command the tests are running on. This should work fine for Unit Tests, RSpec, and Cucumber. If it fails, it will use the shell command that invoked the test suite as a command name.

If you have some non-standard setup and still want nicely labeled test suites, you have to give Simplecov a cue as to what the name of the currently running test suite is. You can do so by specifying SimpleCov.command_name in one test file that is part of your specific suite.

To customize the suite names on a Rails app (yeah, sorry for being Rails-biased, but everyone knows what the structure of those projects is. You can apply this accordingly to the RSpecs in your Outlook-WebDAV-Calendar-Sync gem), you could do something like this:

# test/unit/some_test.rb
SimpleCov.command_name 'test:units'

# test/functionals/some_controller_test.rb
SimpleCov.command_name "test:functionals"

# test/integration/some_integration_test.rb
SimpleCov.command_name "test:integration"

# features/support/env.rb
SimpleCov.command_name "features"

Note that this only has to be invoked ONCE PER TEST SUITE, so even if you have 200 unit test files, specifying it in some_test.rb is enough.

Last but not least if multiple suites resolve to the same command_name be aware that the coverage results will clobber each other instead of being merged. SimpleCov is smart enough to detect unique names for the most common setups, but if you have more than one test suite that doesn't follow a common pattern then you will want to manually ensure that each suite gets a unique command_name.

If you are running tests in parallel each process has the potential to clobber results from the other test processes. If you are relying on the default command_name then SimpleCov will attempt to detect and avoid parallel test suite command_name collisions based on the presence of ENV['PARALLEL_TEST_GROUPS'] and ENV['TEST_ENV_NUMBER']. If your parallel test runner does not set one or both of these then you must set a command_name and ensure that it is unique per process (eg. command_name "Unit Tests PID #{$$}").

If you are using parallel_tests, you must incorporate TEST_ENV_NUMBER into the command name yourself, in order for SimpleCov to merge the results correctly. For example:

# spec/spec_helper.rb
SimpleCov.command_name "features" + (ENV['TEST_ENV_NUMBER'] || '')

simplecov-html prints the used test suites in the footer of the generated coverage report.

Timeout for merge

Of course, your cached coverage data is likely to become invalid at some point. Thus, result sets that are older than SimpleCov.merge_timeout will not be used any more. By default, the timeout is 600 seconds (10 minutes), and you can raise (or lower) it by specifying SimpleCov.merge_timeout 3600 (1 hour), or, inside a configure/start block, with just merge_timeout 3600.

You can deactivate merging altogether with SimpleCov.use_merging false.

Running coverage only on demand

The Ruby STDLIB Coverage library that SimpleCov builds upon is very fast (on a ~10 min Rails test suite, the speed drop was only a couple seconds for me), and therefore it's SimpleCov's policy to just generate coverage every time you run your tests because it doesn't do your test speed any harm and you're always equipped with the latest and greatest coverage results.

Because of this, SimpleCov has no explicit built-in mechanism to run coverage only on demand.

However, you can still accomplish this very easily by introducing an ENV variable conditional into your SimpleCov setup block, like this:

SimpleCov.start if ENV["COVERAGE"]

Then, SimpleCov will only run if you execute your tests like this:

COVERAGE=true rake test

Errors and exit statuses

To aid in debugging issues, if an error is raised, SimpleCov will print a message to STDERR with the exit status of the error, like:

SimpleCov failed with exit 1

This STDERR message can be disabled with:

SimpleCov.print_error_status = false

Profiles

By default, SimpleCov's only config assumption is that you only want coverage reports for files inside your project root. To save yourself from repetitive configuration, you can use predefined blocks of configuration, called 'profiles', or define your own.

You can then pass the name of the profile to be used as the first argument to SimpleCov.start. For example, simplecov comes bundled with a 'rails' profile. It looks somewhat like this:

SimpleCov.profiles.define 'rails' do
  add_filter '/test/'
  add_filter '/config/'

  add_group 'Controllers', 'app/controllers'
  add_group 'Models', 'app/models'
  add_group 'Helpers', 'app/helpers'
  add_group 'Libraries', 'lib'
end

As you can see, it's just a SimpleCov.configure block. In your test_helper.rb, launch SimpleCov with:

SimpleCov.start 'rails'

SimpleCov.start 'rails' do
  # additional config here
end

Custom profiles

You can load additional profiles with the SimpleCov.load_profile('xyz') method. This allows you to build upon an existing profile and customize it so you can reuse it in unit tests and Cucumber features. For example:

# lib/simplecov_custom_profile.rb
require 'simplecov'
SimpleCov.profiles.define 'myprofile' do
  load_profile 'rails'
  add_filter 'vendor' # Don't include vendored stuff
end

# features/support/env.rb
require 'simplecov_custom_profile'
SimpleCov.start 'myprofile'

# test/test_helper.rb
require 'simplecov_custom_profile'
SimpleCov.start 'myprofile'

Customizing exit behaviour

You can define what SimpleCov should do when your test suite finishes by customizing the at_exit hook:

SimpleCov.at_exit do
  SimpleCov.result.format!
end

Above is the default behaviour. Do whatever you like instead!

Minimum coverage

You can define the minimum coverage percentage expected. SimpleCov will return non-zero if unmet.

SimpleCov.minimum_coverage 90

Minimum coverage by file

You can define the minimum coverage by file percentage expected. SimpleCov will return non-zero if unmet. This is useful to help ensure coverage is relatively consistent, rather than being skewed by particularly good or bad areas of the code.

SimpleCov.minimum_coverage_by_file 80

Maximum coverage drop

You can define the maximum coverage drop percentage at once. SimpleCov will return non-zero if exceeded.

SimpleCov.maximum_coverage_drop 5

Refuse dropping coverage

You can also entirely refuse dropping coverage between test runs:

SimpleCov.refuse_coverage_drop

Using your own formatter

You can use your own formatter with:

SimpleCov.formatter = SimpleCov::Formatter::HTMLFormatter

When calling SimpleCov.result.format!, it will be invoked with SimpleCov::Formatter::YourFormatter.new.format(result), "result" being an instance of SimpleCov::Result. Do whatever your wish with that!

Using multiple formatters

As of SimpleCov 0.9, you can specify multiple result formats:

SimpleCov.formatters = SimpleCov::Formatter::MultiFormatter.new([
  SimpleCov::Formatter::HTMLFormatter,
  SimpleCov::Formatter::CSVFormatter,
])

Available formatters, editor integrations and hosted services

Ruby version compatibility

SimpleCov is built in Continuous Integration on Ruby 2.4+ as well as JRuby 9.2+.

Want to find dead code in production?

Try Coverband.

Want to use Spring with SimpleCov?

If you're using Spring to speed up test suite runs and want to run SimpleCov along with them, you'll find that it often misreports coverage with the default config due to some sort of eager loading issue. Don't despair!

One solution is to explicitly call eager load in your test_helper.rb / spec_helper.rb after calling SimpleCov.start.

require 'simplecov'
SimpleCov.start 'rails'
Rails.application.eager_load!

Alternatively, you could disable Spring while running SimpleCov:

DISABLE_SPRING=1 rake test

Or you could remove gem 'spring' from your Gemfile.

Troubleshooting

The most common problem is that simplecov isn't required and started before everything else. In order to track coverage for your whole application simplecov needs to be the first one so that it (and the underlying coverage library) can subsequently track loaded files and their usage.

If you are missing coverage for some code a simple trick is to put a puts statement in there and right after SimpleCov.start so you can see if the file really was loaded after simplecov was started.

# my_code.rb
class MyCode

  puts "MyCode is being loaded!"

  def my_method
    # ...
  end
end

# spec_helper.rb/rails_helper.rb/test_helper.rb/.simplecov whatever

SimpleCov.start
puts "SimpleCov started successfully!"

Now when you run your test suite and you see:

SimpleCov started successfully!
MyCode is being loaded!

then it's good otherwise you likely have a problem :)

Code of Conduct

Everyone participating in this project's development, issue trackers and other channels is expected to follow our Code of Conduct

teohm/simplecov