tetious/LarkyPrintBoard

Issues

• EXT connectors are mirrored

  #8 opened 7 years ago by tetious
  0

• Clearance is too close near pin one of EXT2 IN.

  #9 opened 7 years ago by tetious
  0

• Add more space between EXT2 in and out

  #10 opened 7 years ago by tetious
  0

• Connect SD_DETECT input (from the LCD) to the MCU

  #6 opened 7 years ago by tetious
  0

• Add pullup on sd_mux and pulldown on sd_detect_out

  #3 opened 7 years ago by tetious
  0

• Add pullup on enc_mux

  #4 opened 7 years ago by tetious
  0

• Fix EXT labels to be more clear

  #7 opened 7 years ago by tetious
  0

• ENC_n_O and ENC_n_O are reversed on the mux.

  #11 opened 7 years ago by tetious
  0

• Add Camera addon port (SPI+5v)

  #5 opened 7 years ago by tetious
  0

• Make JTAG pins available (instead of full UART?)

  #1 opened 7 years ago by tetious
  0

• Fix EXT1 pin mapping

  #2 opened 7 years ago by tetious
  0